Topic: MUST READ.. BISI RELATED (Read 15391 times)

sewell94 · « **on:** October 13, 2011, 12:53:41 AM »

Buddy of mine posted this about Bisi on his Wiki page. Look at 2011, the only post

http://en.wikipedia.org/wiki/Bisi_Ezerioha#Achievements

Achievements - Bisi Ezerioha - Wikipedia, the free encyclopedia en.wikipedia.org

‎2011 places last in a header test preformed Jason "JayWest" Forbes. The other two headers were a real RMF (Randy Monroe) and a Logic "Tri-Y" headers. The test was preformed at P2R performance in Miramar, FL. http://vimeo.com/30353942
.

MTZ · « **Reply #1 on:** October 13, 2011, 12:58:47 AM »

j.h.christ · « **Reply #2 on:** October 13, 2011, 01:37:48 AM »

oh look, at the bottom of the article, there's a place for you to rank the article from 1-5 stars.

ONE STARRED

AND REPORTED

OK

crttaz · « **Reply #3 on:** October 13, 2011, 01:48:09 AM »

Was the Bisi header they used for the test cracked?

LOL!

bigdaddyvtec · « **Reply #4 on:** October 13, 2011, 01:51:10 AM »

Born of Nigerian father with doctorate in International Marketing...

FUCK YOU,

and your god damned spam emails you cracking ass header frosted hair homo

snm95ls · « **Reply #5 on:** October 13, 2011, 08:54:52 AM »

LULZ. Not the first comparison where Bisi's junk places last or in the rear of the pack.

It seems like the only product with his name attached to it that has actually been making good power is the 3.6 SOHC turbo cam.

crxvtec91 · « **Reply #6 on:** October 13, 2011, 09:07:06 AM »

Bisi im not the smartest guy in the world, but can you tell me why your header place last? http://vimeo.com/30353942

http://www.facebook.com/bisimoto?ref=pb

Lets see how long it last hahahahaha

PhilStubbs · « **Reply #7 on:** October 13, 2011, 10:07:49 AM »

I can't see it. His wall only has who he is friends with

HiProfile · « **Reply #8 on:** October 13, 2011, 12:34:08 PM »

Quote from: snm95ls on October 13, 2011, 08:54:52 AM

LULZ. Not the first comparison where Bisi's junk places last or in the rear of the pack.

It seems like the only product with his name attached to it that has actually been making good power is the 3.6 SOHC turbo cam.

Eventually everyone gets lucky. AFAIK, the cam wasn't exactly all in-house specs tho.

crxvtec91 · « **Reply #9 on:** October 13, 2011, 03:44:39 PM »

They took down my post hahaha

snm95ls · « **Reply #10 on:** October 13, 2011, 03:57:57 PM »

Quote from: HiProfile on October 13, 2011, 12:34:08 PM

Quote from: snm95ls on October 13, 2011, 08:54:52 AM
LULZ. Not the first comparison where Bisi's junk places last or in the rear of the pack.

It seems like the only product with his name attached to it that has actually been making good power is the 3.6 SOHC turbo cam.

Eventually everyone gets lucky. AFAIK, the cam wasn't exactly all in-house specs tho.

Oh, I am sure it wasn't.

chris · « **Reply #11 on:** October 13, 2011, 04:00:20 PM »

If Bisi actually did testing he would see all those odd ball angles on exhaust manifolds never applies to the real world power wise. On the old man's h2b crx we tried making similar designs and came up with alot of torque below vtec,worthless imo and huge top end failure. Not surprised the classic tri-y designs owned his stuff.

chris · « **Reply #12 on:** October 13, 2011, 04:03:34 PM »

Zoomie style runners with a collector ftw

PhilStubbs · « **Reply #13 on:** October 13, 2011, 04:26:59 PM »

I have always heard good things about the tri-y

chris · « **Reply #14 on:** October 13, 2011, 04:41:43 PM »

The guy is always trying to over sell with overly complicated language. Glad to see a basic old school design that any person with common sense can see will perform.

hatchbone · « **Reply #15 on:** October 13, 2011, 04:53:07 PM »

Bisi nut swingers will keep him in business though,that be the cold hard truths even if his products are proven to make less power for twice the funds

PhilStubbs · « **Reply #16 on:** October 13, 2011, 04:55:07 PM »

Bisimoto, proven to make more power all the time 5% of the time.

Joseph Davis · « **Reply #17 on:** October 13, 2011, 05:38:00 PM »

Quote from: SecksyPeePee on October 13, 2011, 04:55:07 PM

Bisimoto, proven to make more power all the time 5% of the time, but only when not compared to the stuff that would make more power that they conveniently forgot to test against.

Fixed.

There are a couple scene groups on FB where people have figured out his stuff sucks. The market is coming around.

chris · « **Reply #18 on:** October 13, 2011, 07:02:15 PM »

Quote from: hatchbone on October 13, 2011, 04:53:07 PM

Bisi nut swingers will keep him in business though,that be the cold hard truths even if his products are proven to make less power for twice the funds

He has one of the few dyno's left in southern california still in business so we will be seeing him for many years to come. Im still very torn thinking that his all motor cars always were on the bottle since no one has come close to producing the power #'s he has with his accord motors running literally a copy of his setup.

PhilStubbs · « **Reply #19 on:** October 13, 2011, 07:18:06 PM »

odd resemblance

jabberwock · « **Reply #20 on:** October 13, 2011, 07:40:31 PM »

OH FUCK

Phate · « **Reply #21 on:** October 13, 2011, 09:24:02 PM »

Quote from: chris M on October 13, 2011, 04:00:20 PM

If Bisi actually did testing he would see all those odd ball angles on exhaust manifolds never applies to the real world power wise. On the old man's h2b crx we tried making similar designs and came up with alot of torque below vtec,worthless imo and huge top end failure. Not surprised the classic tri-y designs owned his stuff.

I should start dropping links to his stuff failing on the accord forums, all the F22 guys have huge boners for bisi. The only nutswingers more into him than honda tech are the accord people. Its fucking annoying.

PhilStubbs · « **Reply #22 on:** October 13, 2011, 09:40:48 PM »

the problem isnt that we all think its a 30hp difference. the problem is that he and his nutswingers act like all of his shit makes 30hp more, when in fact it made less.

chris · « **Reply #23 on:** October 13, 2011, 09:46:18 PM »

From a all motor honda stand point that is fair amount of power. Also like I said the bisi header peaked at the lowest rpm which is what I experienced in a real world environment. It is not just about peak power with all motor cars but the ability to carry that power as most h2b cars with cams,port work,real intake will shift at around 9-9500 rpm's at the track even with b series gearing and a tiiite final drive.

I have been around alot of these setups and tuned a couple 280+whp ones and the funky angle headers never worked on anything I tuned.

Conclusion its by far the weakest header design. Peaks the lowest makes the leatstpower and will not carry power outside of peak as needed for all motor drag cars.

turbob16hatch · « **Reply #24 on:** October 13, 2011, 10:41:54 PM »

Quote from: chris M on October 13, 2011, 09:46:18 PM

From a all motor honda stand point that is fair amount of power. Also like I said the bisi header peaked at the lowest rpm which is what I experienced in a real world environment. It is not just about peak power with all motor cars but the ability to carry that power as most h2b cars with cams,port work,real intake will shift at around 9-9500 rpm's at the track even with b series gearing and a tiiite final drive.

I have been around alot of these setups and tuned a couple 280+whp ones and the funky angle headers never worked on anything I tuned.

Conclusion its by far the weakest header design. Peaks the lowest makes the leatstpower and will not carry power outside of peak as needed for all motor drag cars.

agree,

As the number of bends increase the restriction increases unless some other factor is introduced like stepped tube sizes. There is a reason why zoomies came about. Also it is clear he has no clue what happens after the collector given he chooses to place a bend directly after it, pretty good indicator he is a dumbass.

crttaz · « **Reply #25 on:** October 14, 2011, 12:26:12 AM »

Any info on the motor that was used?

What intake setup was used?

sewell94 · « **Reply #26 on:** October 14, 2011, 12:31:17 AM »

Its a stock bottom end h22, pro 1 cams. Ported p13 IM with 4 to 3.5 intake pipe. Its in a gutted to hell eg that runs 11.5@ 115-116

chris · « **Reply #27 on:** October 14, 2011, 01:34:13 AM »

na mike is a moron who has never been on a dyno

chris · « **Reply #28 on:** October 14, 2011, 01:42:22 AM »

It makes peak power at the lowest rpm and as stated I promise that car shifts at 9500 rpm's and never even makes back to the power range where that bisi header makes a little more.

Trust me on this mike I have done alot of these h2b setups and Ill promise with the other brands the car will trap atleast 2-3 mph in the quarter. Been there done that with back to back header tests at the track.

Those funky angle shit dont work yo.

crttaz · « **Reply #29 on:** October 14, 2011, 03:54:38 AM »

The lower powerband shift is a function of the primary length, which is why Bisi made a "bundle of snakes" so he could fit a longer primary length with a decent collector length and still fit into factory location. Due to all the stupid bends he has to use a larger diameter piping to overcome the loss of flow from all the twists and turns.

His headers were originally designed for use with ITB setups so the "noids" would come into play as the TQ was falling off from the primary length tuning. Thus making a smoother powerband instead of the typical ITB powerband. Also higher compression was a factor.

To take a "race design" and try to mass market it to work on a stock motor with cams and ported intake, ain't gonna happen.

News:

Author Topic: MUST READ.. BISI RELATED (Read 15391 times)

chris

chris

chris

chris

chris

chris

chris