Topic: Picking up a new EGT next week (Read 7410 times)

carkrazed · « **on:** October 13, 2011, 05:31:55 PM »

It comes with a pile of parts. Complete JDM celica GT4 ST205 driveline wich uses a custom rear subframe built by pierce motorsports. The rear diff is in and complete but everything else needs mounted n shit. I got pretty much everything to piece it together but a clutch, intercooler and rad.

Joseph Davis · « **Reply #1 on:** October 13, 2011, 05:39:01 PM »

You want to run it on a Honda ECU?

Ntrain2k · « **Reply #2 on:** October 13, 2011, 05:41:34 PM »

Do work!

patsmx5 · « **Reply #3 on:** October 13, 2011, 05:50:07 PM »

looks like some badass is about to happen.

Fuckin' right!

snm95ls · « **Reply #4 on:** October 13, 2011, 06:46:07 PM »

Now that is motherfucking interesting.

SloS13 · « **Reply #5 on:** October 13, 2011, 08:57:56 PM »

This is going to be tits.

Joseph Davis · « **Reply #6 on:** October 14, 2011, 01:03:05 PM »

Quote from: SloS13 on October 13, 2011, 08:57:56 PM

This is going to be tits.

A pair of them, even.

ratcityrex · « **Reply #7 on:** October 14, 2011, 01:51:05 PM »

Quote from: Joseph Davis on October 14, 2011, 01:03:05 PM

Quote from: SloS13 on October 13, 2011, 08:57:56 PM
This is going to be tits.

A pair of them, even.

on two women!

ratcityrex · « **Reply #8 on:** October 14, 2011, 03:11:23 PM »

Call up Mike at lsd and see if he can piece something together. Send him a old center section or something, and mybe a couple of stock plates and double stack the center spring for the pp or something...idk

crxvtec91 · « **Reply #9 on:** October 14, 2011, 04:11:00 PM »

Competition have made h2d disc before anyone else would, or so I heard, but first person to ALWAYS call is Mike from Lsd!!!

chris · « **Reply #10 on:** October 14, 2011, 04:30:55 PM »

http://kennedyenginc.com/default.aspx

chris · « **Reply #11 on:** October 14, 2011, 05:14:53 PM »

They make clutches for basically everything

have your spline disc size and done

I run their stuff aka the mars clutches flip nog uses

Joseph Davis · « **Reply #12 on:** October 14, 2011, 05:35:49 PM »

Quote from: chris M on October 14, 2011, 05:14:53 PM

They make clutches for basically everything

have your spline disc size and done

I run their stuff aka the mars clutches flip nog uses

I thought you'd never come out and say who they were. I deleted a post about them because Flippy said it was your secret.

Joseph Davis · « **Reply #13 on:** October 15, 2011, 12:18:24 PM »

No, horrible. Now change the subject before I delete this thread.

highroller54 · « **Reply #14 on:** October 15, 2011, 12:41:24 PM »

i like were this is going!

chris · « **Reply #15 on:** October 15, 2011, 01:29:41 PM »

The guy who started act worked at kep for like 2 decades before starting act. Lancaster/palmdale clutch heaven. There is also 10,000 rpm

http://www.10000rpm.com/

The guy use to do odd ball clutches for us to back when you use to be able to race hondas in california. 99 percent sure the owner is a nazi literally though.

chris · « **Reply #16 on:** October 15, 2011, 01:31:44 PM »

Quote from: carkrazed on October 14, 2011, 07:21:28 PM

So their shits pretty good then?

Only been in business for 40+ years sp yes go with a cdm product

chris · « **Reply #17 on:** October 15, 2011, 01:34:17 PM »

They also are on old school company aka call them. Have your specs of what your using aka not I have this car etc spline/disc size/puck etc

I'm sure they would do a twin disc honda setups if they could get a order of atleast a couple.

rawr · « **Reply #18 on:** October 15, 2011, 05:28:45 PM »

I have two words to say.

FUCK

YES

Joseph Davis · « **Reply #19 on:** October 16, 2011, 05:31:27 AM »

Your mother often speaks these words to me.

Joseph Davis · « **Reply #20 on:** October 29, 2011, 01:21:25 PM »

Where is your build thread, faggot?

and

FUCK YES

Ntrain2k · « **Reply #21 on:** October 29, 2011, 01:54:15 PM »

Quote from: carkrazed on October 29, 2011, 11:25:09 AM

Just got back from picking this bitch up

Pics naow!

crxvtec91 · « **Reply #22 on:** October 29, 2011, 06:21:26 PM »

Quote from: Ntrain2k on October 29, 2011, 01:54:15 PM

Quote from: carkrazed on October 29, 2011, 11:25:09 AM
Just got back from picking this bitch up

Pics naow!

snm95ls · « **Reply #23 on:** October 29, 2011, 10:27:31 PM »

Quote from: crxvtec91 on October 29, 2011, 06:21:26 PM

Quote from: Ntrain2k on October 29, 2011, 01:54:15 PM
Quote from: carkrazed on October 29, 2011, 11:25:09 AM
Just got back from picking this bitch up

Pics naow!

Ntrain2k · « **Reply #24 on:** October 30, 2011, 09:17:24 AM »

DO WORK!

ratcityrex · « **Reply #25 on:** October 30, 2011, 10:30:42 AM »

Quote from: Ntrain2k on October 30, 2011, 09:17:24 AM

DO WORK!

krazy4 · « **Reply #26 on:** November 09, 2011, 09:25:32 PM »

Quote from: carkrazed on November 09, 2011, 08:21:46 PM

I'm pretty sure i'm goin with this clutch from 10,000 rpm. Its for a miata but I just gotta call em up and make sure they can do the discs with e153 splines. I'm sure it won't be a problem, its a common toyota spline.

This bitch wieghs 10.5 lbs complete.......and its only $1100.00

Baller ass clutch!

crxvtec91 · « **Reply #27 on:** November 11, 2011, 10:31:05 AM »

Do work or im kick you in the nuts as I pass through PA going down to NE dyno day 2012

Joseph Davis · « **Reply #28 on:** November 11, 2011, 11:31:41 AM »

Quote from: crxvtec91 on November 11, 2011, 10:31:05 AM

Do work or im kick you in the nuts TWICE as I pass through PA going down to NE dyno day 2012

Phate · « **Reply #29 on:** January 05, 2012, 11:23:31 PM »

Quote from: carkrazed on January 05, 2012, 11:15:10 PM

Found a nice clean victim. 65k miles and fresh paint. Picking it up this weekend.

So are we to expect some videos of this thing blowing sideways in the snow?

News:

Author Topic: Picking up a new EGT next week (Read 7410 times)

carkrazed

chris

chris

chris

chris

chris