Topic: High end riceboy paraphenalia (Read 5583 times)

Joseph Davis · « **on:** November 29, 2011, 02:40:22 PM »

http://store.carbonfibergear.com/corcel-n-1-carbon-fiber-luxury-bathtub

A bit gauche, IMO.

You guys would probably like this, though: http://store.carbonfibergear.com/ultralight-one-dry-carbon-welding-masks

1991civicsi · « **Reply #1 on:** November 29, 2011, 02:45:17 PM »

PhilStubbs · « **Reply #2 on:** November 29, 2011, 04:06:25 PM »

I'll make that bathtub for half that price if someone wants one. I can't touch that welding helmet price though.

chris · « **Reply #3 on:** November 29, 2011, 05:25:27 PM »

ill spray paint bathtub for taco truck +3 tall cans

Joseph Davis · « **Reply #4 on:** November 29, 2011, 07:27:04 PM »

Quote from: SecksyPeePee on November 29, 2011, 04:06:25 PM

I'll make that bathtub for half that price if someone wants one.

Honestly, what's the cost in materials and approx time?

PhilStubbs · « **Reply #5 on:** November 29, 2011, 07:39:24 PM »

it would probably cost $2k in materials and take me 40-50 hours to make

Joseph Davis · « **Reply #6 on:** November 29, 2011, 07:51:56 PM »

How flexy would that be? Also, have you seen some of the tables/stools on that site? Functional, in your opinion?

Jorsher · « **Reply #7 on:** November 29, 2011, 07:59:56 PM »

Quote from: Joseph Davis on November 29, 2011, 07:51:56 PM

How flexy would that be? Also, have you seen some of the tables/stools on that site? Functional, in your opinion?

Why wouldn't they be?

It's a strong material. You can build tables/stools out of anything.

PhilStubbs · « **Reply #8 on:** November 29, 2011, 08:06:43 PM »

if it was laid on a foam core it can be more stiff than a conventional fiberglass or plastic tub.

the chairs that i saw could be made with a nomex core and be plenty strong enough.

PhilStubbs · « **Reply #9 on:** November 29, 2011, 08:20:41 PM »

looking at some of this stuff, im thinking it might be just carbon laid on wood

like these 2

Jorsher · « **Reply #10 on:** November 29, 2011, 08:33:08 PM »

Quote from: SecksyPeePee on November 29, 2011, 08:20:41 PM

looking at some of this stuff, im thinking it might be just carbon laid on wood

like these 2

Would definitely be a helluva lot cheaper/easier. Actually has me tempted to make a rice coffee table.

dvst8r · « **Reply #11 on:** November 29, 2011, 10:22:26 PM »

Quote from: Joseph Davis on November 29, 2011, 02:40:22 PM

You guys would probably like this, though: http://store.carbonfibergear.com/ultralight-one-dry-carbon-welding-masks

I could see Dave buying this, he would never use it, but it would be something just to have.

Urban Indian · « **Reply #12 on:** November 30, 2011, 01:30:39 AM »

Dick is hard

Passenger · « **Reply #13 on:** November 30, 2011, 01:44:05 AM »

Quote from: carkrazed on November 30, 2011, 01:24:14 AM

Who the hell would pay $300 for a helmet that isn't auto darkening?

I'd happily pay $300 for it if there was no lens at all, but would accept my digital elite guts. Having a really light helmet helps make the 12+ hour shifts suck less. I have 3-4 16hr days of welding to do in a couple weeks, everything helps if you do this kind of shit.

Jorsher · « **Reply #14 on:** November 30, 2011, 01:45:52 AM »

I've been wondering whether carbon fiber will ever lose its appeal. I'm not sure if it looks hot because it looks hot, because it's "rare," or a combination of both.

Either way, the CF furniture does look pretty sweet. Digging the table

Urban Indian · « **Reply #15 on:** November 30, 2011, 01:47:43 AM »

I'd be down for table. Not for $2500 though

Passenger · « **Reply #16 on:** November 30, 2011, 01:48:01 AM »

Quote from: SecksyPeePee on November 29, 2011, 07:39:24 PM

it would probably cost $2k in materials and take me 40-50 hours to make

What kind of hourly rate? I don't own a house so I have no use for a cf tub, but I am curious to know what it costs to build similar parts. How does CF do for resistance against oil?

DSharp · « **Reply #17 on:** November 30, 2011, 01:58:04 AM »

Anyone who would buy this deserves to get ripped off.

2slow · « **Reply #18 on:** November 30, 2011, 02:02:34 AM »

this might sound gay but I like carbon fiber shit. I don't know why but I do

Joseph Davis · « **Reply #19 on:** November 30, 2011, 04:07:25 AM »

Quote from: 2slow on November 30, 2011, 02:02:34 AM

this might sound gay but I like carbon fiber shit. I don't know why but I do

It's because you're gay.

PhilStubbs · « **Reply #20 on:** November 30, 2011, 07:43:45 AM »

Quote from: Passenger on November 30, 2011, 01:48:01 AM

Quote from: SecksyPeePee on November 29, 2011, 07:39:24 PM
it would probably cost $2k in materials and take me 40-50 hours to make

What kind of hourly rate? I don't own a house so I have no use for a cf tub, but I am curious to know what it costs to build similar parts. How does CF do for resistance against oil?

The company I work for charges $85hr for composite repairs. We don't make things too often, but when we do, it's the same price.

What do you have in mind for the oil it would see? I have never seen any issues with oil. The planes we work on have carbon wings and the fuel tank is part of the wing. No bladders or anything, just a sealant poured in and the wing rotated through the course of a day.

92CXyD · « **Reply #21 on:** November 30, 2011, 09:10:03 AM »

That company should make a carbon fiber dildo.

So some you guys can have your "girlfriends" anally pleasure you.

Not naming names like Buk or anyone else.

slappynuts · « **Reply #22 on:** November 30, 2011, 10:18:59 AM »

Passenger · « **Reply #23 on:** November 30, 2011, 12:38:39 PM »

Quote from: SecksyPeePee on November 30, 2011, 07:43:45 AM

Quote from: Passenger on November 30, 2011, 01:48:01 AM
Quote from: SecksyPeePee on November 29, 2011, 07:39:24 PM
it would probably cost $2k in materials and take me 40-50 hours to make

What kind of hourly rate? I don't own a house so I have no use for a cf tub, but I am curious to know what it costs to build similar parts. How does CF do for resistance against oil?

The company I work for charges $85hr for composite repairs. We don't make things too often, but when we do, it's the same price.

What do you have in mind for the oil it would see? I have never seen any issues with oil. The planes we work on have carbon wings and the fuel tank is part of the wing. No bladders or anything, just a sealant poured in and the wing rotated through the course of a day.

That seems pretty reasonable to me. I was thinking about cutting fluid tanks for cnc machines, they rust/rot out all the time, I don't really have the problem because I run a really rich concentrate of water soluable oil, but some of the machines I work on I have to build new tanks every now and then because of the synthetic fluid they are using.

PhilStubbs · « **Reply #24 on:** November 30, 2011, 01:17:57 PM »

You could easily build a fiberglass tank for that and have no problems ever again.

Joseph Davis · « **Reply #25 on:** November 30, 2011, 04:39:48 PM »

Quote from: slappynuts on November 30, 2011, 10:18:59 AM

Hellaflush!

Eggylshatch · « **Reply #26 on:** November 30, 2011, 05:22:05 PM »

Quote from: Joseph Davis on November 30, 2011, 04:39:48 PM

Quote from: slappynuts on November 30, 2011, 10:18:59 AM

Hellaflush!

roflcopter!

PhilStubbs · « **Reply #27 on:** November 30, 2011, 05:40:44 PM »

Quote from: Joseph Davis on November 30, 2011, 04:39:48 PM

Quote from: slappynuts on November 30, 2011, 10:18:59 AM

Hellaflush!

That just might be the funniest thing you have ever said. I'm very tempted to post that on Facebook cause I know a few hella flush retards.

t_cel_t · « **Reply #28 on:** November 30, 2011, 09:04:52 PM »

Quote from: Passenger on November 30, 2011, 01:44:05 AM

Quote from: carkrazed on November 30, 2011, 01:24:14 AM
Who the hell would pay $300 for a helmet that isn't auto darkening?

I'd happily pay $300 for it if there was no lens at all, but would accept my digital elite guts. Having a really light helmet helps make the 12+ hour shifts suck less. I have 3-4 16hr days of welding to do in a couple weeks, everything helps if you do this kind of shit.

get it and jb weld a harbor freight autodark unit into the hole

News:

Author Topic: High end riceboy paraphenalia (Read 5583 times)

chris