Topic: Airless Tires and See through (Read 4153 times)

92CXyD · « **on:** April 14, 2009, 11:38:31 AM »

Alright I think I have finally seen it all after seeing this link: http://fourtitude.rely.net/cgi-bin/artman/exec/view.cgi/6/983

Would any one trust these on their car?

Tim · « **Reply #1 on:** April 14, 2009, 11:41:29 AM »

old as shit, the link you posted even says 2005

92CXyD · « **Reply #2 on:** April 14, 2009, 11:44:10 AM »

I know but the I read they are finally going on sale.

And the question is would you trust them?

Ntrain2k · « **Reply #3 on:** April 14, 2009, 11:53:04 AM »

Might trust them on the bobcat, not on a car...

Colin · « **Reply #4 on:** April 14, 2009, 11:53:14 AM »

Quote from: 92CXyD on April 14, 2009, 11:44:10 AM

I know but the I read they are finally going on sale.

And the question is would you trust them?

If they're being sold they probably went through R&D, therefore safe.

On that note, I wonder how they perform on the track

1slow91hf · « **Reply #5 on:** April 14, 2009, 11:54:11 AM »

id run them on a DD

Urban Indian · « **Reply #6 on:** April 14, 2009, 12:09:57 PM »

Quote from: Ntrain2k on April 14, 2009, 11:53:04 AM

Might trust them on the bobcat, not on a car...

this would be fucking badass on a bobcat

never have to worry about flats again( the people who work for my uncle are retards and blow them off the bead all the time

brine04 · « **Reply #7 on:** April 14, 2009, 12:23:40 PM »

They have made something similar for bobcats for a long time they are the shit but pricey.

Urban Indian · « **Reply #8 on:** April 14, 2009, 12:39:33 PM »

I wonder how well they do with a pallet of keystone block( the 130lb ones)

brine04 · « **Reply #9 on:** April 14, 2009, 01:28:23 PM »

Quote from: Urban Indian on April 14, 2009, 12:39:33 PM

I wonder how well they do with a pallet of keystone block( the 130lb ones)

Fine they are actually stiffer than an pneumatic tire.
These are the ones I was talking about

SgtB · « **Reply #10 on:** April 14, 2009, 01:50:22 PM »

We just fill our bobcat tires with high density foam. You can put 100 nails in them and keep running. They do the same to long reach man lifts.

patsmx5 · « **Reply #11 on:** April 14, 2009, 03:07:01 PM »

Quote from: SgtB on April 14, 2009, 01:50:22 PM

We just fill our bobcat tires with high density foam. You can put 100 nails in them and keep running. They do the same to long reach man lifts.

jeffsciv23 · « **Reply #12 on:** April 14, 2009, 03:09:03 PM »

maybe im overthinking this but they look like they would work good on the tractors but wouldnt mud and shit get stuck in the tires of the car and throw the balence off?

g_shok · « **Reply #13 on:** April 14, 2009, 03:11:49 PM »

any pice of shit gets caught up in that web will unbalance them at high speeds, looks like only for use with slow moving vehicles

92CXyD · « **Reply #14 on:** April 14, 2009, 03:20:02 PM »

Quote from: g_shok on April 14, 2009, 03:11:49 PM

any pice of shit gets caught up in that web will unbalance them at high speeds, looks like only for use with slow moving vehicles

Yeah I was wondering about that too.

Wonder what the service life on these?

malichite · « **Reply #15 on:** April 14, 2009, 03:42:22 PM »

I just want to see some one lay down a smoky burn out with a set of them

stealthiskey · « **Reply #16 on:** April 14, 2009, 06:20:21 PM »

these are great, especially with the rising prices of air these days

jagojon3 · « **Reply #17 on:** April 14, 2009, 06:22:50 PM »

My polymers professor at UW is leading the way in the design and production of these. One thing they are working on is how to keep dirt/snow from getting packed into the voids.

92CXyD · « **Reply #18 on:** April 14, 2009, 06:32:34 PM »

Quote from: jagojon3 on April 14, 2009, 06:22:50 PM

My polymers professor at UW is leading the way in the design and production of these. One thing they are working on is how to keep dirt/snow from getting packed into the voids.

Quote from: n/a mike on April 14, 2009, 03:46:32 PM

the ones you buy for your car will have a side wall on them.
they removed the sidewall so you could see what was inside them.
they will look no different than any other tire you buy.

my problem is you can't adjust the air pressure for racing

So if these tires are going to have sidewall then why work on keeping snow and mud out of the voids.

92CXyD · « **Reply #19 on:** April 14, 2009, 06:36:14 PM »

Quote from: n/a mike on April 14, 2009, 06:34:58 PM

Quote from: 92CXyD on April 14, 2009, 06:32:34 PM
Quote from: jagojon3 on April 14, 2009, 06:22:50 PM
My polymers professor at UW is leading the way in the design and production of these. One thing they are working on is how to keep dirt/snow from getting packed into the voids.

Quote from: n/a mike on April 14, 2009, 03:46:32 PM
the ones you buy for your car will have a side wall on them.
they removed the sidewall so you could see what was inside them.
they will look no different than any other tire you buy.

my problem is you can't adjust the air pressure for racing

So if these tires are going to have sidewall then why work on keeping snow and mud out of the voids.

the thing they are working on to keep the snow and mud out are called sidewalls ;D

LOL ;D

jagojon3 · « **Reply #20 on:** April 14, 2009, 06:47:24 PM »

It's not that easy, and he's more focused on military apps like hummers and multi ton vehicles.

brine04 · « **Reply #21 on:** April 14, 2009, 06:50:36 PM »

Quote from: SgtB on April 14, 2009, 01:50:22 PM

We just fill our bobcat tires with high density foam. You can put 100 nails in them and keep running. They do the same to long reach man lifts.

That works too but you have to cut the tire off the wheel when it is bald so you don't have a casing to be retreaded.

Kenny Rogers · « **Reply #22 on:** April 14, 2009, 07:30:30 PM »

One of my tires blew on the freeway today... fucking horseshit stock rubber. I think I'll try one of these airless tires next $:-\$

brine04 · « **Reply #23 on:** April 14, 2009, 07:44:35 PM »

Quote from: danwjmu on April 14, 2009, 07:16:18 PM

Quote from: brine04 on April 14, 2009, 06:50:36 PM
Quote from: SgtB on April 14, 2009, 01:50:22 PM
We just fill our bobcat tires with high density foam. You can put 100 nails in them and keep running. They do the same to long reach man lifts.
That works too but you have to cut the tire off the wheel when it is bald so you don't have a casing to be retreaded.
Would split rims fix this? I'm not trying to be a smartass or anything, I know nothing of the subject, I'm just wondering.

No they wouldn't. For a few reasons the foam would glue itself to the wheel so super shitty to dismount and mount if you even could without fucking it all up and you couldn't retread it with the foam in it. I have done foam filled tires before and we just sawzall them off of the wheel. I have never seen a skidsteer with multipiece wheels anyway.

Conceptz-X · « **Reply #24 on:** April 16, 2009, 07:48:31 PM »

Wax the rim, run a piece of duct tape where they seperate and use a split setup

News:

Author Topic: Airless Tires and See through (Read 4153 times)

Colin