:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

GET YOUR OFFICIAL REALHOMEMADETURBO.COM STICKERS! (link)

Pages: [1]   Go Down

Author Topic: Crx traction bars on a DA  (Read 8160 times)

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Crx traction bars on a DA
« on: April 15, 2009, 05:41:51 PM »
Will it work?


I have ETD traction bars for a CRX and I was gonna turbo my DA and was wondering if these bars bolt up....
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: Crx traction bars on a DA
« Reply #1 on: April 15, 2009, 06:07:48 PM »
I think you will need longer bars.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

dephtone

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
Re: Crx traction bars on a DA
« Reply #2 on: April 16, 2009, 10:33:16 AM »
No they won't work, if you look at your CRX traction bar, the bolt holes are off set but the DA front crossmember has the bolts that are inline with each other. Also the DA stock crossmember is shorter (yeah get that shit I even measured it's like 4 inches.) than a EF crossmember.
« Last Edit: April 16, 2009, 10:37:01 AM by dephtone »
Logged

DmC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3036
Re: Crx traction bars on a DA
« Reply #3 on: April 22, 2009, 10:40:38 AM »
Quote from: Towdogg on April 15, 2009, 05:41:51 PM
Will it work?


I have ETD traction bars for a CRX and I was gonna turbo my DA and was wondering if these bars bolt up....
Send the bars to me.
Logged

crx-ecutioner313

  • Guest
Re: Crx traction bars on a DA
« Reply #4 on: May 06, 2009, 12:18:27 AM »
Nope no they wont
Logged
Pages: [1]   Go Up
« previous next »