:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: How to remove brake boost nipple from manifold  (Read 5375 times)

Tim

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2632
How to remove brake boost nipple from manifold
« on: August 31, 2012, 11:11:59 AM »
I have one snapped off and I couldn't get it to budge with heat, pb, and pliers.

I finally got it out with an easy out, but I can't see getting a replacement out of a junk manifold without mangling it.

How do you fuckers do it?

I have 3 or 5 more ls intakes, but I need a clean nipple to put in a b16 intake, or I'd just swap intakes.
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: How to remove brake boost nipple from manifold
« Reply #1 on: August 31, 2012, 06:51:20 PM »
Drill, tap, and put a m npt nipple on it.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: How to remove brake boost nipple from manifold
« Reply #2 on: August 31, 2012, 11:57:22 PM »
Mine are 1/4" npt 90* 3/8" barb i belive
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother
Pages: [1]   Go Up
« previous next »