Topic: ***2013 PNW RHMT MEET/DYNO DAY!*** aftermath/pics on pg8 (Read 39446 times)

bigdaddyvtec · « **Reply #60 on:** March 07, 2013, 03:27:38 AM »

Ive put it together and stayed on top of it for three years you fat faggot. If youd pay attentiuon... I DONBT want to put it together. I divulged that last year... Dumbass.

DROPOUT and I have been putting that thing together every year its been at tommys and stayed on top of it.

After youve done something... anything, then you talk... Until then re insert that cock shaped cheeseburger into your face and close your mouth around a face full of meat.

90turboteg · « **Reply #61 on:** March 07, 2013, 10:14:06 AM »

Its funny because if you properly read what i wrote you would have seen i also wrote you probably dont want to do it, and or are to lazy... Why would i put a meet together, i don't have anything to dyno and i work alot of hours, i care more about buying a house and saving money than building a car. Even if i did want to build a car you faggots have the garage packed full so i would have nowhere to work on it= no point.

bigdaddyvtec · « **Reply #62 on:** March 07, 2013, 03:24:38 PM »

Hence you saying i probably dont want to was a moot point little buddy. Its been stated repeatedly

As for the garage I know... We need an addition :OP)

92_eg_c1 · « **Reply #63 on:** March 08, 2013, 02:01:12 AM »

count me in, im going forsure this time. i just requested that day off. and... i guess ill throw my pos on the dyno. lol

ratcityrex · « **Reply #64 on:** March 08, 2013, 11:45:41 AM »

Quote from: 92_eg_c1 on March 08, 2013, 02:01:12 AM

count me in, im going forsure this time. i just requested that day off. and... i guess ill throw my pos on the dyno. lol

Fuck yeah! I'm all about pos's on the dyno!

ApexSilver06MR · « **Reply #65 on:** March 09, 2013, 03:13:32 PM »

Hmmmmm. I missed it last year. Will Russ be there with the r2d2 sounding single cam? I miss the PNW nig nogs.

92CXyD · « **Reply #66 on:** March 09, 2013, 07:46:12 PM »

Quote from: ApexSilver06MR on March 09, 2013, 03:13:32 PM

Hmmmmm. I missed it last year. Will Russ be there with the r2d2 sounding single cam? I miss the PNW nig nogs.

No, buying a new car and getting other bills paid.

Maybe next year

jdmhatchracer94 · « **Reply #67 on:** March 10, 2013, 02:26:29 AM »

The da will be on the rollers goin for bigger #'s

99gsrturbo · « **Reply #68 on:** March 10, 2013, 08:30:53 AM »

As most know I'm in South Korea. Still trying to get someone to get my car there to see numbers.

j.h.christ · « **Reply #69 on:** March 10, 2013, 11:03:35 PM »

Wish this was an awd dyno.

turbohf · « **Reply #70 on:** March 11, 2013, 01:37:15 AM »

lol. me too. i want the Galant on there more than the CRX. Galant is gonna need some tuning time on the dyno im sure tho...

should still be fun time.

88dx · « **Reply #71 on:** March 11, 2013, 02:17:32 AM »

I have 3 motorbikes I could dyno, two dirt bikes on one roller and the street bike on the other lol

jdmhatchracer94 · « **Reply #72 on:** March 21, 2013, 08:21:04 PM »

Wonder what a stock hf would dyno at

ratcityrex · « **Reply #73 on:** March 21, 2013, 09:48:25 PM »

Quote from: jdmhatchracer94 on March 21, 2013, 08:21:04 PM

Wonder what a stock hf would dyno at

14.....whp and 110tq

jdmhatchracer94 · « **Reply #74 on:** March 21, 2013, 11:50:46 PM »

14hp close tried to do a burn out the other day that was a no go

turbohf · « **Reply #75 on:** March 21, 2013, 11:56:10 PM »

neither of my HF's would do a burnout. shit my blue one had a bad clutch, would spin a little on a steep hill...all that with 62hp from the factory...must have been complete garbage lol... think i got the white one to spin tire in loose dirt lol.

ratcityrex · « **Reply #76 on:** March 22, 2013, 12:01:38 AM »

Its crazy how well it drove though. Thing went ok besides the fact the clutch was at the top of the pedal.

Back on topic...... Ill be there with the nova and possibly the integra too.

turbohf · « **Reply #77 on:** March 22, 2013, 12:48:27 AM »

WE NEED MORE CARS FOR THE DYNO CONFIRMED

Scotty Dosent Know · « **Reply #78 on:** March 22, 2013, 02:28:00 AM »

Whats up Dustin.....got your message and apparently I have an account on here??? lol

I am 95% sure I should be able to be there. You can put me down for the dyno too.....probably wont be impressive but fuck it haha

turbohf · « **Reply #79 on:** March 22, 2013, 09:45:49 AM »

nice, i thought you did. let me know if you know any others that might be interested?

turbohf · « **Reply #80 on:** March 27, 2013, 11:14:10 PM »

i got my buddy with the Hyundai working on his car getting it ready for the meet. he as addressed the issues from last year (heat soak/non-intercooled/clutch) and is pretty sure it will lay down a full pull.... then i seen the car. LOL.

ratcityrex · « **Reply #81 on:** March 27, 2013, 11:56:24 PM »

less than 2 months ladies

jdmhatchracer94 · « **Reply #82 on:** March 28, 2013, 11:58:01 AM »

Doin work only things left are cams head studs and gears

runsfromdacops · « **Reply #83 on:** March 28, 2013, 04:26:01 PM »

fuck me, i just orderd a shit ton of ne stuff for my car. t56 mag,custom coil overs,rear gears, rocker arms. me and ross have a shit load of work to do

Ntrain2k · « **Reply #84 on:** March 28, 2013, 04:41:15 PM »

Quote from: runsfromdacops on March 28, 2013, 04:26:01 PM

fuck me, i just orderd a shit ton of ne stuff for my car. t56 mag,custom coil overs,rear gears, rocker arms. me and ross have a shit load of work to do

You turned the wick up on that thing any more?

runsfromdacops · « **Reply #85 on:** March 29, 2013, 06:58:08 PM »

Quote from: Ntrain2k on March 28, 2013, 04:41:15 PM

Quote from: runsfromdacops on March 28, 2013, 04:26:01 PM
fuck me, i just orderd a shit ton of ne stuff for my car. t56 mag,custom coil overs,rear gears, rocker arms. me and ross have a shit load of work to do

You turned the wick up on that thing any more?

no real point, it cant hook what its got now. what i need is to make it hook all 900whp before it ends up in a wall

flat_black · « **Reply #86 on:** March 29, 2013, 11:19:39 PM »

I will likely be there, might dyno depending on what i bring

bigdaddyvtec · « **Reply #87 on:** March 30, 2013, 04:30:29 AM »

Quote from: flat_black on March 29, 2013, 11:19:39 PM

I will likely be there, might dyno depending on what i bring

TRying to make it, at least street tuned... Gonna be tight...

ratcityrex · « **Reply #88 on:** March 30, 2013, 11:30:54 AM »

Quote from: bigdaddyvtec on March 30, 2013, 04:30:29 AM

Quote from: flat_black on March 29, 2013, 11:19:39 PM
I will likely be there, might dyno depending on what i bring

TRying to make it, at least street tuned... Gonna be tight...

You get your shit back from DG yet?

bigdaddyvtec · « **Reply #89 on:** March 30, 2013, 02:11:57 PM »

Waitng to get the head back From Guilluame so i can take it to heads up for a surface and seats cut..
Then build.

News:

Author Topic: ***2013 PNW RHMT MEET/DYNO DAY!*** aftermath/pics on pg8 (Read 39446 times)

Author Topic: 2013 PNW RHMT MEET/DYNO DAY! aftermath/pics on pg8 (Read 39446 times)