Topic: **2014 June 28/29 RHMT/TT.NET DIRTY SOUTH MEET/DYNO DAY AND 88DX FUNDRAISER!*** (Read 65673 times)

Ntrain2k · « **Reply #300 on:** June 14, 2014, 12:20:46 PM »

Quote from: jabberwock on June 13, 2014, 09:21:47 PM

Not too hopeful about making it. I have much to do yet.

What needs to be done?

jabberwock · « **Reply #301 on:** June 14, 2014, 10:50:40 PM »

Basically build a whole car. I will most likely be rolling with no interior except a seat and a rejection sticker on the windshield. Gas tank and motor go in tomorrow. I found a crank pulley bolt today in a coffee can of random shit. Who knows i may make it

Ntrain2k · « **Reply #302 on:** June 15, 2014, 09:35:36 AM »

Quote from: jabberwock on June 14, 2014, 10:50:40 PM

Basically build a whole car. I will most likely be rolling with no interior except a seat and a rejection sticker on the windshield. Gas tank and motor go in tomorrow. I found a crank pulley bolt today in a coffee can of random shit. Who knows i may make it

Hardcore.

crxvtec91 · « **Reply #303 on:** June 16, 2014, 09:58:34 AM »

Quote from: Ntrain2k on June 15, 2014, 09:35:36 AM

Quote from: jabberwock on June 14, 2014, 10:50:40 PM
Basically build a whole car. I will most likely be rolling with no interior except a seat and a rejection sticker on the windshield. Gas tank and motor go in tomorrow. I found a crank pulley bolt today in a coffee can of random shit. Who knows i may make it

Hardcore.

x2 crx is apart and my spare z6 crank is fuck........

Might roll in in either a stock crx or the f2b

Ntrain2k · « **Reply #304 on:** June 16, 2014, 11:00:54 AM »

Quote from: crxvtec91 on June 16, 2014, 09:58:34 AM

Quote from: Ntrain2k on June 15, 2014, 09:35:36 AM
Quote from: jabberwock on June 14, 2014, 10:50:40 PM
Basically build a whole car. I will most likely be rolling with no interior except a seat and a rejection sticker on the windshield. Gas tank and motor go in tomorrow. I found a crank pulley bolt today in a coffee can of random shit. Who knows i may make it

Hardcore.

x2 crx is apart and my spare z6 crank is fuck........

Might roll in in either a stock crx or the f2b

F2b with DSM setup on it!

Gold DA9 · « **Reply #305 on:** June 18, 2014, 05:20:09 PM »

Quote from: Ntrain2k on June 16, 2014, 11:00:54 AM

Quote from: crxvtec91 on June 16, 2014, 09:58:34 AM
Quote from: Ntrain2k on June 15, 2014, 09:35:36 AM
Quote from: jabberwock on June 14, 2014, 10:50:40 PM
Basically build a whole car. I will most likely be rolling with no interior except a seat and a rejection sticker on the windshield. Gas tank and motor go in tomorrow. I found a crank pulley bolt today in a coffee can of random shit. Who knows i may make it

Hardcore.

x2 crx is apart and my spare z6 crank is fuck........

Might roll in in either a stock crx or the f2b

F2b with DSM setup on it!

^This

Ntrain2k · « **Reply #306 on:** June 18, 2014, 07:48:50 PM »

Started my new job last Fri. One of my requirements before I accepted was that I get out of the office at 5PM or earlier on the 27th. I'll not miss this.

Gold DA9 · « **Reply #307 on:** June 18, 2014, 09:25:25 PM »

Quote from: Ntrain2k on June 18, 2014, 07:48:50 PM

Started my new job last Fri. One of my requirements before I accepted was that I get out of the office at 5PM or earlier on the 27th. I'll not miss this.

boss status

qikenuf · « **Reply #308 on:** June 20, 2014, 07:41:50 PM »

Hoping my shin feels good enough to come down next week still. Fractured it Saturday

Ntrain2k · « **Reply #309 on:** June 21, 2014, 10:32:10 AM »

Quote from: poopmouth on June 20, 2014, 07:41:50 PM

Hoping my shin feels good enough to come down next week still. Fractured it Saturday

https://www.youtube.com/watch?v=J8kMrLx6_aQ&feature=player_detailpage#t=9

Ntrain2k · « **Reply #310 on:** June 21, 2014, 02:23:32 PM »

1 week fuckers!

Gold DA9 · « **Reply #311 on:** June 21, 2014, 02:48:15 PM »

List of things to do before leaving Thursday night and going to try and meet up with Steven somewhere on the way.

Get new debit card because this bitch dont scan most the time anymore.
Oil Change and Spark plugs
Find and fix the short for my cigarette lighter or/and add another one. (Cant have my phone dieing on a 9-10 hour drive)
Clean car out and put trunk interior back in.
Get tuned(Not necessary, but hopefully getting done tomorrow.)

crxvtec91 · « **Reply #312 on:** June 23, 2014, 10:45:38 AM »

I need to fix 2 strip bolts on the half shaft

Gold DA9 · « **Reply #313 on:** June 23, 2014, 04:53:54 PM »

Quote from: crxvtec91 on June 23, 2014, 10:45:38 AM

I need to fix 2 strip bolts on the half shaft

Seems like you will be ready.

We have to figure out where to meet up on the road.

crxvtec91 · « **Reply #314 on:** June 24, 2014, 03:12:16 PM »

Need to do a few more things but should be good to go.

Ntrain2k · « **Reply #315 on:** June 24, 2014, 04:42:07 PM »

Quote from: crxvtec91 on June 24, 2014, 03:12:16 PM

Need to do a few more things but should be good to go.

Gonna lean on the boosted F at the meet?

Gold DA9 · « **Reply #316 on:** June 24, 2014, 06:50:13 PM »

Quote from: crxvtec91 on June 24, 2014, 03:12:16 PM

Need to do a few more things but should be good to go.

Art thinks you guys should meet up with us in York and then head down.

Probably going to throw some parts in my trunk too.. got new mishimoto rad hoses, skunk2 pro upper ball joints, paper weight sc61...

crxvtec91 · « **Reply #317 on:** June 24, 2014, 09:24:25 PM »

Quote from: Ntrain2k on June 24, 2014, 04:42:07 PM

Quote from: crxvtec91 on June 24, 2014, 03:12:16 PM
Need to do a few more things but should be good to go.

Gonna lean on the boosted F at the meet?

When don't we lean into it hahahhaa

rawr · « **Reply #318 on:** June 26, 2014, 01:32:40 PM »

Were in Kentucky on the bikes. We'll probably stay by deals gap tonight and be on our way tomorrow.

Joseph Davis · « **Reply #319 on:** June 26, 2014, 07:04:05 PM »

And, once again, the Beast Coast has three times the meet of the west coast, even before the meet has happened.

Ntrain2k · « **Reply #320 on:** June 26, 2014, 08:22:22 PM »

Will be heading out tomorrow afternoon.

Gold DA9 · « **Reply #321 on:** June 26, 2014, 09:32:14 PM »

Leaving in a several hours. Waiting for Art to get off work and then its waiting till Steven and Anthony get to York.

rawr · « **Reply #322 on:** June 27, 2014, 09:10:37 AM »

Did the dragons tail last night then camped at deals gap. God damn its pretty down here.

Joseph Davis · « **Reply #323 on:** June 27, 2014, 09:45:00 AM »

rawr · « **Reply #324 on:** June 27, 2014, 04:14:57 PM »

Quote from: Joseph Davis on June 27, 2014, 09:45:00 AM

O K

Will you be back at the shop today? Jason said your phone was broken and you might be going to sc to get a head

Gold DA9 · « **Reply #325 on:** June 27, 2014, 06:15:38 PM »

Steven you better come down here.

Joseph Davis · « **Reply #326 on:** June 28, 2014, 07:12:06 AM »

I went to SC for head, but ended up getting screwed.

crxvtec91 · « **Reply #327 on:** June 28, 2014, 12:14:02 PM »

Quote from: Gold DA9 on June 27, 2014, 06:15:38 PM

Steven you better come down here.

1 to many set backs. Last min miss fire....

Swap out 2 dieing motor mounts, fix 3 strip bolts, a dead bushing, front pads, bleed brakes, fix boost leak and right as I'm getting ready to leave it starts miss firing as if a piston died.

Swap plugs, coil, wires, cap, rotor, and dizzy. Then she ran ok-ish......

ratcityrex · « **Reply #328 on:** June 28, 2014, 04:28:58 PM »

We will just call you the Jacer63 of the east coast.

crxvtec91 · « **Reply #329 on:** June 28, 2014, 08:11:28 PM »

Quote from: ratcityrex on June 28, 2014, 04:28:58 PM

We will just call you the Jacer63 of the east coast.

Hahaha I've made it the last 3 or 4 years, shit can't recall also made more power then you

News:

Author Topic: **2014 June 28/29 RHMT/TT.NET DIRTY SOUTH MEET/DYNO DAY AND 88DX FUNDRAISER!*** (Read 65673 times)

Author Topic: 2014 June 28/29 RHMT/TT.NET DIRTY SOUTH MEET/DYNO DAY AND 88DX FUNDRAISER!* (Read 65673 times)