:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: widebands?  (Read 5398 times)

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
widebands?
« on: January 20, 2013, 12:33:45 AM »

ok, its been 10years since i have bought a wideband. and when i bought that one, im sure there wasnt many on the market and i bought the jewish one out there, for the jewest of deals.  :Jew:

so yeah, i still have my PLX M300. works great far as i can tell.


but i have 3 cars, and it kinda tiresome swapping it around. all 3 at this point look like they will be running the same engine management, AEM, and i will be datalogging threw my laptop. i will be hardwired them to the car.


now i have always kinda liked the digital gauge there. but kinda scary keeping an eye on the road and the WB at the same time. and in the CRX lately i have just been making pulls, then checking the logs. it is nice for quick reference tho.
but i dont like gauges. especially when visible to the public.


hardwired/datalog only:
Innovative $141
AEM $200
PLX $150

gauge:
Innovative $158
AEM $160
PLX $ 196



so hows the quality and accuracy on these things these days? these are all big companys, so im sure they are topnotch?

Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: widebands?
« Reply #1 on: January 20, 2013, 02:18:36 AM »

I have LC-1 with gauge in the prelude and 240, i have the older style in the prelude and the newer one in the 240, they have both been trouble free since ive had them..

I've tuned my 240 completely off this wideband and it read pretty damn close on the dyno.. within a couple tenths

Good enough accurate in my book
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: widebands?
« Reply #2 on: January 20, 2013, 02:50:57 AM »

Plx m300.....
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: widebands?
« Reply #3 on: January 20, 2013, 02:58:12 AM »

Plx m300.....

i need something more concealed. plus the new m300s are almost 300bucks. watching a used one for almost 200... all the above are cheaper, and std 52mm gauges.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: widebands?
« Reply #4 on: January 20, 2013, 03:23:51 AM »

The m300 is a solid unit. That the one I rocked forever. But in the teg I was limited for space. I did a bunch of work on a friend's car and he gave me holder style of this one. Same thing just not a touch screen. For $200 its a Damn solid unit!

 http://www.plxdevices.com/product_info.php?id=WDBDSMAFR_DM6

Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

random-strike

  • Certified OG
  • *****
  • Online Online
  • Posts: 19564
Re: widebands?
« Reply #5 on: January 20, 2013, 03:54:58 AM »

aem uego is what i have cheap jew/nigger deal on ebay seems work fine. havent' had any problems
Logged
Double doors, marble floors, naked hoes around me

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: widebands?
« Reply #6 on: January 20, 2013, 04:04:54 AM »

One of the problem with the aem unit is that its inaccurate.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: widebands?
« Reply #7 on: January 20, 2013, 08:58:13 AM »

I remember reading a huge wideband shootout a magazine did a few years ago. The lc1 had one of the best overall ratings. I have always had innovate stuff. Had 2 lc1's and now I have an lm2.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: widebands?
« Reply #8 on: January 20, 2013, 09:54:09 AM »

aem uego is what i have cheap jew/nigger deal on ebay seems work fine. havent' had any problems

The irony, coming from Johnny Conspiracy..
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: widebands?
« Reply #9 on: January 20, 2013, 11:36:45 AM »

AEM junk
Innovate dead in six month's
PLX trashed in magazines but never dies (M250/300 anyway) and reads the same as all four of my deceased Innovates.

NGK AFX is your best bang for the buck.  Bosch based widebands only get you into the ballpark, they are not accurate.

flat_black

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 315
Re: widebands?
« Reply #10 on: January 20, 2013, 01:41:35 PM »

AEM junk
Innovate dead in six month's
PLX trashed in magazines but never dies (M250/300 anyway) and reads the same as all four of my deceased Innovates.

NGK AFX is your best bang for the buck.  Bosch based widebands only get you into the ballpark, they are not accurate.

what happened to the Innovates?

mines been great in the prelude had it for like 5-6 years now i think
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: widebands?
« Reply #11 on: January 20, 2013, 02:19:16 PM »

I remember reading a huge wideband shootout a magazine did a few years ago. The lc1 had one of the best overall ratings. I have always had innovate stuff. Had 2 lc1's and now I have an lm2.
oh yeah....aem did worst... was the least accurate. but still close.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: widebands?
« Reply #12 on: January 20, 2013, 03:12:52 PM »

Mitch, three LC-1 dead a week out of the six month warranty.  Add in the bitchy moany forced recals from low battery situations common in tuning and they are to awkward to fool with.  LM-2 died a year and a half ago, whatever controls the sensor's heater circuit doesn't anymore.

I remember reading a huge wideband shootout a magazine did a few years ago. The lc1 had one of the best overall ratings. I have always had innovate stuff. Had 2 lc1's and now I have an lm2.
oh yeah....aem did worst... was the least accurate. but still close.

First, Bosch sensors aren't accurate.  Second, AEM china units read all over the place from unit to unit, so the one in the article was probably cherry picked for the review... and it still sucked.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6786
  • I look around and all I see is Smegheads
Re: widebands?
« Reply #13 on: January 20, 2013, 03:43:04 PM »

I've better luck with my 14point7 SLC Pour Plus than the AEM UEGO I had before.  :noel:

I've nothing else yet, I've seen thread about this d-series.  :noel:

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: widebands?
« Reply #14 on: January 20, 2013, 08:04:18 PM »

I had an lc1 die about a yer out of warranty. They fixed it free. I have no innovate complaints. My lm2 has the ability to change that, but so far so good.

JD, what do you tune with?
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

rsmith2786

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2020
Re: widebands?
« Reply #15 on: January 20, 2013, 09:52:27 PM »

I have an m300 that's been sitting in a box for a couple years now.  It was used for about a month as I was getting my old daily dialed in.  I'd do $150 shipped.

I just pulled it out of the box and it looks like there are some bubbles between the tint and plexi on the front display.  I noticed it when I put it away and it's gotten worse but it could be fixed with a few minutes and a couple square inches of window tint.
Logged

highroller54

  • I caught the fable Novacorn
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: widebands?
« Reply #16 on: January 20, 2013, 10:42:14 PM »

I have a aem analog in my blue car, works ok, I don't trust it but it does stuff lol.
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif

random-strike

  • Certified OG
  • *****
  • Online Online
  • Posts: 19564
Re: widebands?
« Reply #17 on: January 21, 2013, 02:21:27 PM »

i don't need great accuracy as long as its within .5 it would be fine
Logged
Double doors, marble floors, naked hoes around me

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: widebands?
« Reply #18 on: January 21, 2013, 08:35:15 PM »

i don't need great accuracy as long as its within .5 it would be fine

No Bosch sensor is.

Aero

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 622
    • Turbotalk.org
Re: widebands?
« Reply #19 on: January 21, 2013, 08:53:38 PM »

I've had issues with my LC-1, intermittent operation etc.

random-strike

  • Certified OG
  • *****
  • Online Online
  • Posts: 19564
Re: widebands?
« Reply #20 on: January 22, 2013, 12:17:52 AM »

You can at least confirm its close by checking the plugs. Or sticking your duck I. The exhaust like I do and checking the color
Logged
Double doors, marble floors, naked hoes around me
Pages: [1]   Go Up