Topic: High compression F2B turbo (Read 30182 times)

crxvtec91 · « **Reply #30 on:** April 09, 2014, 03:23:58 PM »

UPDATE!

Had to order some more parts. I learn the hard way that the coolent port on the f22b2 and a1 head are far apart enough to never seal.............

VID!

crxvtec91 · « **Reply #31 on:** April 09, 2014, 03:56:01 PM »

http://www.youtube.com/watch?v=dX9kwjEUnmg

Ntrain2k · « **Reply #32 on:** April 09, 2014, 07:15:32 PM »

Fixed the vid so it will embed.

Running is good!

ratcityrex · « **Reply #33 on:** April 09, 2014, 07:16:05 PM »

looks like shit. I Like!

darkess90 · « **Reply #34 on:** April 19, 2014, 03:11:37 PM »

I'm in for this of course!. Sleeper

crxvtec91 · « **Reply #35 on:** April 21, 2014, 09:20:17 AM »

Quote from: ratcityrex on April 09, 2014, 07:16:05 PM

looks like shit. I Like!

Thanks I just need a tune

Quote from: darkess90 on April 19, 2014, 03:11:37 PM

I'm in for this of course!. Sleeper

turbohf · « **Reply #36 on:** April 21, 2014, 09:53:06 AM »

ok, i miss something? this is a stock F now or the kseries hicomp motor?

darkess90 · « **Reply #37 on:** April 21, 2014, 05:30:22 PM »

Quote from: turbohf on April 21, 2014, 09:53:06 AM

ok, i miss something? this is a stock F now or the kseries hicomp motor?

Stock F the high comp he is starting another thread on that i presume.

ratcityrex · « **Reply #38 on:** April 21, 2014, 05:58:26 PM »

Quote from: darkess90 on April 21, 2014, 05:30:22 PM

Quote from: turbohf on April 21, 2014, 09:53:06 AM
ok, i miss something? this is a stock F now or the kseries hicomp motor?

Stock F the high comp he is starting another thread on that i presume.

Hey, where is your noob intro post?

Ntrain2k · « **Reply #39 on:** April 21, 2014, 06:20:36 PM »

Quote from: ratcityrex on April 21, 2014, 05:58:26 PM

Quote from: darkess90 on April 21, 2014, 05:30:22 PM
Quote from: turbohf on April 21, 2014, 09:53:06 AM
ok, i miss something? this is a stock F now or the kseries hicomp motor?

Stock F the high comp he is starting another thread on that i presume.

Hey, where is your noob intro post?

I've been hitting him up about it too.

Probably going to have to Wednesday him.

ratcityrex · « **Reply #40 on:** April 21, 2014, 08:01:56 PM »

Quote from: Ntrain2k on April 21, 2014, 06:20:36 PM

Quote from: ratcityrex on April 21, 2014, 05:58:26 PM
Quote from: darkess90 on April 21, 2014, 05:30:22 PM
Quote from: turbohf on April 21, 2014, 09:53:06 AM
ok, i miss something? this is a stock F now or the kseries hicomp motor?

Stock F the high comp he is starting another thread on that i presume.

Hey, where is your noob intro post?

I've been hitting him up about it too.

Probably going to have to Wednesday him.

Solid plan....

darkess90 · « **Reply #41 on:** April 22, 2014, 08:43:05 PM »

Huh my intro post

ratcityrex · « **Reply #42 on:** April 22, 2014, 09:36:05 PM »

Quote from: darkess90 on April 22, 2014, 08:43:05 PM

Huh my intro post

Yes a intro mutha fucking post.....like this

http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html

or this

http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html

crxvtec91 · « **Reply #43 on:** April 23, 2014, 09:34:31 AM »

Quote from: darkess90 on April 22, 2014, 08:43:05 PM

Huh my intro post

Kev rhmt tradition is a solid noob intro post. DO WORK!

Quote from: turbohf on April 21, 2014, 09:53:06 AM

ok, i miss something? this is a stock F now or the kseries hicomp motor?

Its a stock f22 right now. If I can find K20a3 rods ill slap together a high comp f23 turbo setup

ApexSilver06MR · « **Reply #44 on:** April 24, 2014, 03:34:57 AM »

Quote from: darkess90 on April 22, 2014, 08:43:05 PM

Huh my intro post

Nice title faggot!!!!!

crxvtec91 · « **Reply #45 on:** April 24, 2014, 11:13:28 AM »

Well on some shit needs the hg pop........... not sure why, the setup has a few hundred miles on it and was running fine.

Ntrain2k · « **Reply #46 on:** April 24, 2014, 05:49:41 PM »

Quote from: ApexSilver06MR on April 24, 2014, 03:34:57 AM

Quote from: darkess90 on April 22, 2014, 08:43:05 PM
Huh my intro post

Nice title faggot!!!!!

lol

Quote from: crxvtec91 on April 24, 2014, 11:13:28 AM

Well on some shit needs the hg pop........... not sure why, the setup has a few hundred miles on it and was running fine.

That sucks. How was the tune?

crxvtec91 · « **Reply #47 on:** April 24, 2014, 07:50:07 PM »

Quote from: Ntrain2k on April 24, 2014, 05:49:41 PM

Quote from: ApexSilver06MR on April 24, 2014, 03:34:57 AM
Quote from: darkess90 on April 22, 2014, 08:43:05 PM
Huh my intro post

Nice title faggot!!!!!

lol

Quote from: crxvtec91 on April 24, 2014, 11:13:28 AM
Well on some shit needs the hg pop........... not sure why, the setup has a few hundred miles on it and was running fine.

That sucks. How was the tune?

No tune.... Not boosting atm.....

I check my arp head studs some were off. Time for a new hg and exchange my crapmen tq wrench........

Gold DA9 · « **Reply #48 on:** May 02, 2014, 12:35:35 AM »

Do work!!! Im holding out on finding a gem before i start a fuck you $2k build.. Holset, f22, thinking 90-93 Accord maybe 94-95. Need to see which one i can get the lightest.

And what car will i be seeing in June and racing? My friend is supposed to be going to Spring Nationals this weekend. Sidenote.... Accord may get tuned this weekend.

crxvtec91 · « **Reply #49 on:** May 02, 2014, 12:22:25 PM »

Quote from: Gold DA9 on May 02, 2014, 12:35:35 AM

Do work!!! Im holding out on finding a gem before i start a fuck you $2k build.. Holset, f22, thinking 90-93 Accord maybe 94-95. Need to see which one i can get the lightest.

And what car will i be seeing in June and racing? My friend is supposed to be going to Spring Nationals this weekend. Sidenote.... Accord may get tuned this weekend.

Car been pissing me off lately.....

Not sure which car ill have down there. 5th started popping out from time to time. Crx needs a TON of work..............

Gold DA9 · « **Reply #50 on:** May 07, 2014, 07:06:43 PM »

Quote from: crxvtec91 on May 02, 2014, 12:22:25 PM

Car been pissing me off lately.....

Not sure which car ill have down there. 5th started popping out from time to time. Crx needs a TON of work..............

You know which day you are going down?

crxvtec91 · « **Reply #51 on:** May 08, 2014, 11:22:46 AM »

Leaving the 26th at night if Art ever sends me the chip

Gold DA9 · « **Reply #52 on:** May 09, 2014, 04:56:23 PM »

Quote from: crxvtec91 on May 08, 2014, 11:22:46 AM

Leaving the 26th at night if Art ever sends me the chip

HAHAHAH!!!! Let me walk over to him and say something. I work in a different part of the building now.

I have off the 27th and 30th. You have a time frame for which you plan to roll out?

crxvtec91 · « **Reply #53 on:** June 23, 2014, 03:28:15 PM »

UPDATE TIME!

Quote from: mitchwbr;3978274

Any updates on this car?

It has a "tune":bigok:

She is running rich and I believe my boost gauge is off. She reads 6-8-ish psi; as for power I would say low 200's.

I really need to perform a boost leak tes, and fix 2 strip bolts before cranking the boost to say 15 or 20 psi:bigok:

http://s971.photobucket.com/user/crxvtec91/media/Project%204dr/20140612_211244_zps6d307011.mp4.html

http://s971.photobucket.com/user/crxvtec91/media/Project%204dr/20140612_211054_zpseb58ff76.mp4.html

http://s971.photobucket.com/user/crxvtec91/media/Project%204dr/20140612_210747_zpsc1c6a974.mp4.html

Be for anyone says anything. This wasnt pushing it, as going full throttle only spins.

darkess90 · « **Reply #54 on:** August 19, 2014, 12:30:17 PM »

word steven lol I was in the sedan last week with ya. You need work on why it's getting rich sir!.

Gold DA9 · « **Reply #55 on:** October 04, 2014, 01:23:59 PM »

updates?

crxvtec91 · « **Reply #56 on:** October 05, 2014, 10:29:06 PM »

Quote from: Gold DA9 on October 04, 2014, 01:23:59 PM

updates?

Sitting and waiting for you, or im going to part her.

Gold DA9 · « **Reply #57 on:** October 06, 2014, 07:10:39 PM »

Quote from: crxvtec91 on October 05, 2014, 10:29:06 PM

Quote from: Gold DA9 on October 04, 2014, 01:23:59 PM
updates?

Sitting and waiting for you, or im going to part her.

Getting the funds in order.

crxvtec91 · « **Reply #58 on:** October 07, 2014, 08:43:53 AM »

Quote from: Gold DA9 on October 06, 2014, 07:10:39 PM

Quote from: crxvtec91 on October 05, 2014, 10:29:06 PM
Quote from: Gold DA9 on October 04, 2014, 01:23:59 PM
updates?

Sitting and waiting for you, or im going to part her.

Getting the funds in order.

I havent driven her since I got the s2k lol

ratcityrex · « **Reply #59 on:** October 07, 2014, 02:04:42 PM »

Quote from: crxvtec91 on October 07, 2014, 08:43:53 AM

Quote from: Gold DA9 on October 06, 2014, 07:10:39 PM
Quote from: crxvtec91 on October 05, 2014, 10:29:06 PM
Quote from: Gold DA9 on October 04, 2014, 01:23:59 PM
updates?

Sitting and waiting for you, or im going to part her.

Getting the funds in order.

I havent driven her since I got the s2k lol

And where is that build thread?

News:

Author Topic: High compression F2B turbo (Read 30182 times)