:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: How to clean copper spary out of the cooling system?  (Read 1468 times)

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
How to clean copper spary out of the cooling system?
« on: October 23, 2013, 02:41:45 PM »

So I (being a dumbass) Copper sprayed my head gasket a couple of years ago and My cooling system is full of the the shit now. Gonna pull the head and swap a non sprayed gasket back on. Now how do I get rid of the residual shit in the cooling system? Have you guys ever had this problem? Didnt think about the open deck on the honda motor when I did this. I need to clean the rad out too I think. What would rhmt do?
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: How to clean copper spary out of the cooling system?
« Reply #1 on: October 23, 2013, 03:57:48 PM »

So I (being a dumbass) Copper sprayed my head gasket a couple of years ago and My cooling system is full of the the shit now. Gonna pull the head and swap a non sprayed gasket back on. Now how do I get rid of the residual shit in the cooling system? Have you guys ever had this problem? Didnt think about the open deck on the honda motor when I did this. I need to clean the rad out too I think. What would rhmt do?

A heater hose t-adapter and and a garden hose flush should do the trick, maybe with some superflush chemicals.

Takes about 15 minutes or so.  :noel:

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: How to clean copper spary out of the cooling system?
« Reply #2 on: October 23, 2013, 05:16:39 PM »

my blue 4dr EK was like that... think I just drained and swapped coolant and didn't worry about it. shit was nasty...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: How to clean copper spary out of the cooling system?
« Reply #3 on: October 23, 2013, 08:36:18 PM »

I have never had it get in the cooling system, am I missing something?
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: How to clean copper spary out of the cooling system?
« Reply #4 on: October 23, 2013, 10:05:30 PM »

I have never had it get in the cooling system, am I missing something?

it just flakes off the headgasket thats in the coolant jacket after a while i think and floats around in there. it was built up in the corners of the sleeves in my Y7 block from the POOR ass mini-me swap. lots of black rtv to scrape off that fucker too... hate.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'
Pages: [1]   Go Up