Topic: EG F2B Turbo :) (Read 29707 times)

94EGCoopey · « **Reply #30 on:** April 12, 2014, 03:01:33 AM »

Yep, Koseis are Black. 15x7 +35.

I am not quite ready to sell them, have to recover after the turbo setup. If you'd like, I let you know first though.

I would love to run 949 6ULs, but I am 5 lug.

Seriously been contemplating going back to 4 lug but then I'd have to change axles as well as I am 36mm axles or go with aftermarket K style hubs.

Kinda shitty 949 doesn't make 5 bolt but I understand the reason behind 949.

So now I am stuck with high end dollar wheels.

Literally no one makes 15x8 mid offsets unless its Rays/Volk.

They trim paint is SEM Landau Black. Said to be an exact replica of EG Black.

The Recaro is original. It's a Recaro SR3 Le Mans aka Confetti.

Passenger seat is Del Sol and rear is factory. Actually was contemplating dying the rear seats or going back to gray interior.

danz · « **Reply #31 on:** April 12, 2014, 01:47:23 PM »

Ahhh I am trying to find something decent that will work to dye some DA seats I got... I am so used to black the grey sticks out.

94EGCoopey · « **Reply #32 on:** April 12, 2014, 11:27:37 PM »

Few parts landed today.

My DIY 3 Bar Map Sensors (Thanks HiProfile for the thread) and my 2.5" 4 bolt to V Band Downpipe piece.

Untitled by 94EGCoopey, on Flickr

Untitled by 94EGCoopey, on Flickr

AN Fittings landed, but I am going to have to use a barb setup.

Peakboost Ramhorn is full of surprises.

Also got a package from my people in China.

Untitled by 94EGCoopey, on Flickr

Then plumbed the Boost Gauge. Changed it out from a compression fitting to a straight barb. Prefer rubber to the shit ass nylon.

Untitled by 94EGCoopey, on Flickr

Throwback:

Nikki Nova:

Morgan:

and for

n/a mike:

ratcityrex · « **Reply #33 on:** April 12, 2014, 11:37:55 PM »

Whole lot of meat curtans........ other than that I want to see this fucking thing boosted.

94EGCoopey · « **Reply #34 on:** April 12, 2014, 11:58:13 PM »

Almost there.

Just waiting on Go Autoworks Piping and IC and working out the drain issue.

n/a mike · « **Reply #35 on:** April 13, 2014, 12:19:59 AM »

mike likes fat chicks
also I have a wedding ring that looks just like yours, found it at a wedding.

94EGCoopey · « **Reply #36 on:** April 13, 2014, 01:44:35 AM »

Dually noted.

Mines Sterling Silver with Carbon Fiber Inlay.

darkess90 · « **Reply #37 on:** April 18, 2014, 03:51:50 PM »

nice f2b I know somebody else liking this too lol!.clean eg sedan dude.

Ntrain2k · « **Reply #38 on:** April 18, 2014, 05:43:51 PM »

Quote from: darkess90 on April 18, 2014, 03:51:50 PM

nice f2b I know somebody else liking this too lol!.clean eg sedan dude subscribed.

Noob post?

94EGCoopey · « **Reply #39 on:** April 18, 2014, 07:27:19 PM »

I have a fan!

ratcityrex · « **Reply #40 on:** April 18, 2014, 08:07:04 PM »

Quote from: 94EGCoopey on April 18, 2014, 07:27:19 PM

I have a fan!

More than one there sweet cheeks.....

94EGCoopey · « **Reply #41 on:** April 18, 2014, 10:11:03 PM »

fucking right.

No real updates yet.

Installed my DIY Map Sensor.

Started mocking up the intercooler.

Got the hood back on with the additional spacers. Still need to trim alittle for the map sensor to clear.

IC Piping was delayed one day from Go Autoworks. So crossing my fingers I can scoop it tomorrow from Fedex, if not, it will be here Monday.

Only thing that is out of my hands is the fucking oil return.

Got the measurements and angle that I needed for the return line. Sent it to one fabricator and the prick had it for 4 days and never touched it.

So I picked it up and took it to another shop, and fuck me running, I missed their fab guy by 2hrs and he is gone for the week.

Sooo I took it to another Fab guy I know who builds Rat Rods

and he said it could potentially be done tomorrow and if not, it will be done Monday.

So tomorrow's agenda since the wife is off:

-Cut Bumper Support and mount up the IC.
-Try and scoop the Piping.
-Trim the bumper.
-Bolt on 4 Bolt to V Band adaptor
-Relocate my Fuel Filter until my pieces for my tuck come in.
-Drop the Pan and tap that bitch like a free for all on a thai hooker.

So, here's a picture since I dont have any new shit from my car.

Sorry n/a mike, not into fat chicks.

n/a mike · « **Reply #42 on:** April 18, 2014, 10:42:24 PM »

Quote from: 94EGCoopey on April 18, 2014, 10:11:03 PM

Sorry n/a mike, not into fat chicks.

You don't need to be into them to post at least one.

94EGCoopey · « **Reply #43 on:** April 18, 2014, 10:44:51 PM »

you talking obese or 130-140lbs?

n/a mike · « **Reply #44 on:** April 19, 2014, 12:40:28 AM »

130-140 lbs isn't fat unless she is 4'10"
This link below might be good for you to get used to how much real women weigh.
http://www.mybodygallery.com/photos-35945-body-shape.htm?StartAt=21#.U1H3iqJ7Tpc

This thread is now about Fat chicks and Mike fucking them

94EGCoopey · « **Reply #45 on:** April 19, 2014, 11:07:39 AM »

All you had to say was hippo's.

Ntrain2k · « **Reply #46 on:** April 19, 2014, 12:00:39 PM »

damnit mike

darkess90 · « **Reply #47 on:** April 19, 2014, 05:20:08 PM »

Quote from: Ntrain2k on April 18, 2014, 05:43:51 PM

Quote from: darkess90 on April 18, 2014, 03:51:50 PM
nice f2b I know somebody else liking this too lol!.clean eg sedan dude subscribed.

Noob post?

What about it im a noob here on rhmt dude? Lol.

Ntrain2k · « **Reply #48 on:** April 19, 2014, 07:53:12 PM »

Quote from: darkess90 on April 19, 2014, 05:20:08 PM

Quote from: Ntrain2k on April 18, 2014, 05:43:51 PM
Quote from: darkess90 on April 18, 2014, 03:51:50 PM
nice f2b I know somebody else liking this too lol!.clean eg sedan dude subscribed.

Noob post?

What about it im a noob here on rhmt dude? Lol.

http://www.realhomemadeturbo.com/forum/index.php/topic,14535.0.html

ratcityrex · « **Reply #49 on:** April 20, 2014, 01:04:44 AM »

God damn it mike........ you crack me up man.....lol I fucking love how you twist shit around.

n/a mike · « **Reply #50 on:** April 20, 2014, 03:33:23 PM »

Worked a wedding last night and this fat bridesmaid wanted me. then the bitch got mad cause we didn't play her song.

94EGCoopey · « **Reply #51 on:** April 21, 2014, 01:37:59 AM »

Nothing majorly new.

Trimmed up the bumper and mounts the IC. Not sure if I am going to leave it this way or flip it. Depends on how Greg at Go Autoworks made my piping.

Also, pick up my flange tomorrow as well. So hopefully if the fucking weather holds out, I could be finished and ready for the exhaust shop tomorrow.

Untitled by 94EGCoopey, on Flickr

crxvtec91 · « **Reply #52 on:** April 21, 2014, 09:21:59 AM »

Quote from: ratcityrex on April 20, 2014, 01:04:44 AM

God damn it mike........ you crack me up man.....lol I fucking love how you twist shit around.

darkess90 · « **Reply #53 on:** April 21, 2014, 05:33:46 PM »

Quote from: crxvtec91 on April 21, 2014, 09:21:59 AM

Quote from: ratcityrex on April 20, 2014, 01:04:44 AM
God damn it mike........ you crack me up man.....lol I fucking love how you twist shit around.

Lol

ratcityrex · « **Reply #54 on:** April 21, 2014, 05:57:04 PM »

Quote from: darkess90 on April 21, 2014, 05:33:46 PM

Quote from: crxvtec91 on April 21, 2014, 09:21:59 AM
Quote from: ratcityrex on April 20, 2014, 01:04:44 AM
God damn it mike........ you crack me up man.....lol I fucking love how you twist shit around.

Lol

Hey, where is your noob intro post?

94EGCoopey · « **Reply #55 on:** April 25, 2014, 12:16:19 AM »

So, I am a few days behind on posts.

Anyways, Here's the scoop;

Got the pan done. Had an excuse to go buy step drill bits.

Untitled by 94EGCoopey, on Flickr

Untitled by 94EGCoopey, on Flickr

Started out as an adapter fitting on the inside of the pan. Being that it would hit the windage tray, I shaved off all but the nut and JB welded the inside as well.

Untitled by 94EGCoopey, on Flickr

Final Result:

Untitled by 94EGCoopey, on Flickr

Pan was painted with 3M Professional Undercoating to help spot any leaks. I usually do this to all pans that I remove to help with finding leaks, if any.

Untitled by 94EGCoopey, on Flickr

Got my piping in from Greg at Go Autoworks.

Everything for the most part fit like a glove, with the exception of the 180* pipe on the hotside. Needs 1" removed, no biggie.

Untitled by 94EGCoopey, on Flickr

Bumper all trimmed up and piping mounted.

Untitled by 94EGCoopey, on Flickr

Started her up today:

Untitled by 94EGCoopey, on Flickr

Here is a video. I am not sure if you need a fbook to see it, but its a short 30-35 second vid showing it idling, getting ready to head to the exhaust shop.

https://www.facebook.com/photo.php?v=10154034774440431&l=5634037336439509843

92CXyD · « **Reply #56 on:** April 25, 2014, 10:06:46 AM »

Looks good

94EGCoopey · « **Reply #57 on:** April 28, 2014, 10:53:52 PM »

Team Fuck You.

IMG_0616 by 94EGCoopey, on Flickr

IMG_0565 by 94EGCoopey, on Flickr

crxvtec91 · « **Reply #58 on:** April 29, 2014, 11:38:07 AM »

About time!

So when is JD going to tune this?

94EGCoopey · « **Reply #59 on:** April 29, 2014, 11:00:14 PM »

I am going to play around with it for alittle while and see what I can do until I can get to him. He is roughly 4.5hrs from me one way. Ogres' in the Mountains and I am in the foothills...

News:

Author Topic: EG F2B Turbo :) (Read 29707 times)