:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: Tune Time  (Read 5453 times)

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Tune Time
« on: July 09, 2018, 03:19:32 PM »

Taking my junk to see the darkest man in the NW July 21.

https://photos.app.goo.gl/iQgtrK7zVHchaGwL6
https://photos.app.goo.gl/95pMj7PhQmbyvLQq9

1992 GSR DB2
Piston and rod ls/vtec
Hx35
94+ gsr cams
Precision 880's
Walbro 255
32x12x3 intercooler all 3" charge piping
gm 3bar
Junk2 IM
ChrisM 74mm TB

Will it make a number or shit all over the dyno?
FUck you
Logged
92GSR - mild interest

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Tune Time
« Reply #1 on: July 11, 2018, 12:55:05 PM »

450+ or bust! Nig nog leed for teh wins! Really close to my old build.
I had built lower b18a -12cc dish
Hype r head,
aebs intake,
Chris 74mm,
splog with hx35, 12cm housing,
750cc injectors,
3" exhaust and charge pipes,
no mufflers, 2 resonators,
4 bar.
@ 26psi it made around 436whp and like 336tq on pump gas.

It was a pretty crusty tune. Was a modified tune from my old non vtec build then about 30 min on the dyno with Dave working a little magic on the old ibm.

Could have probably pumped out a bunch more and cleaned things up but I didn't care a whole lot. I just wanted 8k open dump pipe screams.
« Last Edit: July 11, 2018, 12:59:22 PM by ratcityrex »
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

Tim

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2632
Re: Tune Time
« Reply #2 on: July 11, 2018, 12:57:49 PM »

I was going to say I made 425 on a similar build.
Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #3 on: July 11, 2018, 06:26:26 PM »

I'll be happy if it makes over 400whp. That was the goal when I started this build 10 years ago (life happens car has been in storage). Leed is going to pop in a mac valve for me so we can control boost through the ecu. Plan is to tune on teh Canadian pump 94 octane. I'm running an original CC-Fab ramhorn mani on this thing too, straight from the shipping baron. Anyway July 21st in Bellingham I'll have a few other Canadian RHMT members with me dvst8r, Trevor72, and Gawd if anyone is in the area and wants to stop by or have some drinks Saturday night.
Logged
92GSR - mild interest

rawr

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1603
Re: Tune Time
« Reply #4 on: July 11, 2018, 11:17:01 PM »

I thought it was going to make 400 until I saw that it had a cc fab manifold.


Now I think its going to make 900. O0 O0 O0 O0 O0 O0


Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #5 on: July 12, 2018, 01:06:28 PM »

I thought it was going to make 400 until I saw that it had a cc fab manifold.


Now I think its going to make 900. O0 O0 O0 O0 O0 O0

better make 900 at 66% throttle, I'll put my safety squints on  8) :noel: :noel:
Logged
92GSR - mild interest

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #6 on: July 17, 2018, 01:08:20 PM »

Fuck fuck fuck, car is going for an alignment tomorrow was checking ground clearance on the new wg dump tube and the fucking wg port is cracking off the manifold. Hotrexed to the max so I'll mig that bitch up and heat wrap it again cause grinding + heat wrap make my welds look acceptable
Logged
92GSR - mild interest

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #7 on: July 18, 2018, 12:04:59 PM »

was up til 130 this morning pulling the manifold to weld and then getting it all back together.stripped off a cunt manifold nut so wasted a bunch of time zip cutting that off in a total dick location. got up at 630 to get it on the trailer and to the alignment shop  :noel:  so hopefully back on track to tune Saturday.

Need a 14psi tial wg spring if anyone has one in Bellingham area?
Logged
92GSR - mild interest

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: Tune Time
« Reply #8 on: July 19, 2018, 12:21:37 PM »

was up til 130 this morning pulling the manifold to weld and then getting it all back together.stripped off a cunt manifold nut so wasted a bunch of time zip cutting that off in a total dick location. got up at 630 to get it on the trailer and to the alignment shop  :noel:  so hopefully back on track to tune Saturday.

Need a 14psi tial wg spring if anyone has one in Bellingham area?

Dustin probably has one in his collection  :noel:

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #9 on: July 23, 2018, 02:49:17 PM »

made 403/280 at 24psi on pump. Happy that it made 400 but a bit disappointed it wasn't closer to ratcityrex's numbers, goes to show the difference type R cams make I guess. The eCtune rolling anti lag is killer for dirty 3rds from a roll, it was cold driving home saturday night and it gets a bit dirty at the top of 4th when the extra boost comes in from gate pressure at 19psi to the controller at 24 which is fairly sketchy as the alignment is fucked and the passenger front wheel hops like a bitch.
Logged
92GSR - mild interest

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Tune Time
« Reply #10 on: July 25, 2018, 11:44:08 AM »

A whole lot of this also depends on dyno to dyno. Take the numbers with a grain of salt. I had some crazy Canadian b17 get cams I think. Nobody any where could identify it. Tom Sewell was even confused on what cams they where. I think he said they were super close to the late model far cams but not quite type r cams. The extra power from mine could have also been I think I ended up ru ning 26lbs of boost to your 24lbs. I do know that mine made about another 50lbs of tq over yours. Was 434hp, 336tq looking back at my dyno graph I had some breakup with the dyno reading at about 5500rpms.

Could have also been that I was running the aebs intake and Chris m. Ported the shit out of it. Who know. But at the end of the day, your car should scoot around real good!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #11 on: April 08, 2019, 01:12:48 PM »

Update: fuck you all, also sold this car. Working on UI to buy his 01? Trans Am WS6
Logged
92GSR - mild interest

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: Tune Time
« Reply #12 on: April 25, 2019, 01:08:27 AM »

Yes! Then boost that!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: Tune Time
« Reply #13 on: April 25, 2019, 02:53:51 PM »

Probably just bolt-ons I want to daily it like 325 miles a week in the summer so need some good mileage cause of the crazy expensive gas up here in Canadia due to our Canuckistania peso and fuckin taxes from sock boy.
Logged
92GSR - mild interest

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8948
  • Go outside and play hide and go fuckyourself
Re: Tune Time
« Reply #14 on: August 12, 2019, 06:33:02 PM »

I predict bangbus views and darkness
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---
Pages: [1]   Go Up