Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[glustic]

Goals:

• At least 200 whp
• 13 Second 1/4 Mile

Mods:

• Holset H1C turbo w/ 16mm exhaust housing
• 2.5" downpipe
• CDM cast manifold w/ 38mm wastegate flange
• CDM 38 MM wastegate
• CDM intercooler
• Stealthmode oil lines
• Spoolin Performance intercooler pipes, 2.25" cold, 2.0" hot
• CDM Greddy Type S BOV
• 560cc Evo 8 injectors
• ACT street performance clutch + Heavy Duty flywheel
• DC Sports intake manifold
• Walbro CRX fuel pump
• Rebuilt transmission
• Tuner Toys vacuum manifold
• Integra resistor box
• Autometer boost gauge
• Greddy turbo timer

Future goals:

• 11 Second 1/4 Mile
• 350 whp

Future mods:

• Vitara pistons
• Eagle or TT rods
• Full head rebuild
• Crower cam
• Skunk 2 cam gear
• 1000cc injectors

New Setup Added 1/15:








Old Setup:
Tuesday we got intercooler mounted, downpipe made, intercooler pipes almost done, just need to figure out the hot side. We got the oil drain tapped and JB welded in. Just need to get the fuel pump in, injectors in with the pig tails, get my ecu chipped, get the plugs in, royal purple in, vacuum lines for bov, boost gauge, MBC and the vacuum manifold. Should be gettin it tuned in vegas next week hopefully. Anyways on to the pics, shitty ass cell phone pics, but whatever.








Said pics of car and my baller ass downpipe





And that sexy shaved ass



Day Three:



The hot side didnt fit well at all, turbo is almost touching my block. Had to cut the U pipe and put another coupler in the middle, and gangster lean the fuck out of the pipe so it fit.



Resistor box install


Was a bitch to desolder all those fucking holes.



Dyno Graph on T04E turbo

[ApexSilver06MR]

finally you start a build thread.. 

its lookin good.  lets see overall pics of this said vehicle

[glustic]

finally you start a build thread.. 

its lookin good.  lets see overall pics of this said vehicle

Actually I probably have some up on sho. Lemme look.

[glustic]

finally you start a build thread.. 

its lookin good.  lets see overall pics of this said vehicle

Actually I probably have some up on sho. Lemme look.

Yes I can quote myself... Anyways went over to my buddies shop and took some pics... Hope your happy jay. Haha.

[ApexSilver06MR]

remind me to donate a trunk to you..   


the ass of your car look like a 20 cup rice cooker

[glustic]

remind me to donate a trunk to you..   


the ass of your car look like a 20 cup rice cooker

haha, ill keep ya to that. shit was already done when i bought it. Fucker rattles like a bitch. They had that drop down trunk mod bs shit to it too.

[glustic]

you get the fuel pump yet? hows it fit 

Yeah man got the fuel pump like 3 days ago haha. Lets just say we made it fit. Its 180 degrees opposite of how the civic is setup but that shit should work. We had to use a worm gear clamp to hold the pump on the bracket.

[glustic]

Everything is done minus bolting up the hot side IC pipe, and wiring in the resistor box, that will happen sunday. On Tuesday next week I plan on going to the dyno and getting tuned from Dougs Dyno Power in Vegas. Ill post up my weak ass dyno graph when i get it.

Updated first post with pics.

[glustic]

Yeah man got the fuel pump like 3 days ago haha. Lets just say we made it fit. Its 180 degrees opposite of how the civic is setup but that shit should work. We had to use a worm gear clamp to hold the pump on the bracket.

cool shit, glad it worked.

is dougs dyno power a good place to get a tune done?
i don't recall their name from when i lived out there.

My friends all say hes good. Hes tuned alot of my friends Evos, including a 650whp monster. I havent heard anything bad. I was gonna go to hondoctors, but they wont touch chipped ecus. how gay.

[glustic]

My friends all say hes good. Hes tuned alot of my friends Evos, including a 650whp monster. I havent heard anything bad. I was gonna go to hondoctors, but they wont touch chipped ecus. how gay.

how much psi are you tuning to or are you gonna let them go till you are afraid something is gonna blow?
how much power are you hoping for?

Im gonna stay low boost, my wastegate is set for 7psi, and imma add a boost controller for added security. Im hoping to get at least 200 whp. We will see.

[glustic]

Update,

Boost leak problem fixed. The diaphragm on my bov is leaking. With the recirc tube closed, I build boost. I need to cut my cold side and make it shorter, it will rub on my tire if I turn a sharp left.

[glustic]

Shits done! Boostin 7 pounds! Will have dyno sheet Friday. Hoping for at least 200 whp. We will see.

[onlyflash944]

good luck


was there a specs post somewhere and i missesd it?

[glustic]

good luck


was there a specs post somewhere and i missesd it?

Nah. Ill add that at the top here in a bit, busy here at work.

[ApexSilver06MR]

good luck


was there a specs post somewhere and i missesd it?

Nah. Ill add that at the top here in a bit, busy here at work.

do it now

[glustic]

good luck


was there a specs post somewhere and i missesd it?

Nah. Ill add that at the top here in a bit, busy here at work.

do it now

Done bitch

[onlyflash944]

7psi doesn't need a crushed dsm bov, none the less nice work

[glustic]

7psi doesn't need a crushed dsm bov, none the less nice work

For me it does. The fucker was leaking. I crushed it and it stopped leaking.

[ApexSilver06MR]

shit looks good.. 

someone throw this shit in the build thread


after countless phone calls from zack....  shits finally done.  good shit zachary

[glustic]

shit looks good.. 

someone throw this shit in the build thread


after countless phone calls from zack....  shits finally done.  good shit zachary

Haha. Hey man, had problems, and I called up my homie.  :somb:

[BoostForLife]

can you post pictures in thier large size? not fun to click on every link.

Good job on the build though.

[danz]

i ran 13.2 @ 107 with less than 200whp. 

i also used an hf adaptor plate. 

do it and dont fail

[glustic]

can you post pictures in thier large size? not fun to click on every link.

Good job on the build though.

Large size is like 1600x2000. I'll resize later today. I'm going to throw up a photoshoot later today aswell.

[glustic]

i ran 13.2 @ 107 with less than 200whp. 

i also used an hf adaptor plate. 

do it and dont fail

Word I'll have to hit up the track. Dyno sheet coming tomorrow.

[glustic]

Son of a bitch. I was driving down to Vegas and guess what happened? I drove about 10 miles, and my revs starting going up, tried to put my car into neutral and the fucker was stuck between 5th and neutral. I pull off to the side of the road, wait 2 fucking hours for my step dad to show up with his truck and trailer my bitch all the way to my buddies shop.

Next day, I ripped out the tranny and took it apart, and what did I see?

Metal all over the fucker


The bearing that this shaft goes into had a nice hint of purple and blue in it haha.


So, log on to Majestic Honda... And this is the final bill...



To top it off my god damn BOV is leaking, I crushed it to see if it would hold and now I build boost. But I have compressor surge like a dirty whore. So I bought a nice new shiny CDM greddy type s off of silicon intakes. I hope to get to the dyno next Friday, but we will see.

[88dx]

To top it off my god damn BOV is leaking, I crushed it to see if it would hold and now I build boost. But I have compressor surge like a dirty whore. So I bought a nice new shiny CDM greddy type s off of silicon intakes. I hope to get to the dyno next Friday, but we will see.

U have compressor surge because ur BOV isnt opening now that u crushed its not that its leaking.

[glustic]

To top it off my god damn BOV is leaking, I crushed it to see if it would hold and now I build boost. But I have compressor surge like a dirty whore. So I bought a nice new shiny CDM greddy type s off of silicon intakes. I hope to get to the dyno next Friday, but we will see.

U have compressor surge because ur BOV isnt opening now that u crushed its not that its leaking.

Problem fixed. It was leaking and now allowing me to hold boost. I crushed it and it didnt open.... I bought a CDM bov and took the extra spring out and now no more compressor surge.

[88dx]

ahhhhhhhhh

[glustic]

ahhhhhhhhh

This is what you will be saying tomorrow after you see my dyno graph.

[glustic]

Updated with dyno graph.