Topic: crome 1.5.3 (Read 7483 times)

lilpooh21186 · « **on:** June 16, 2009, 01:42:51 AM »

anyone else having a bitch time getting this verson to Datalog. Using Hulog?

d112crzy · « **Reply #1 on:** June 16, 2009, 02:01:02 AM »

Never had an issue with the new version. Been using it since it came out. I use a serial datalogging cable tho. It connects EVERY time.

jagojon3 · « **Reply #2 on:** June 16, 2009, 02:04:50 AM »

Works perfect

lilpooh21186 · « **Reply #3 on:** June 16, 2009, 12:07:42 PM »

it was working fine before my laptop crashed now it wont connect i just didi that ftdi clean so mabey that will take care of the problem

lilpooh21186 · « **Reply #4 on:** June 19, 2009, 09:53:05 PM »

the clean fixed everything.

BangBusMaster · « **Reply #5 on:** June 25, 2009, 01:04:29 AM »

What is this ftdi clean you speak of?

ifly87 · « **Reply #6 on:** June 25, 2009, 03:06:08 AM »

I could never get the hullog to work, i just bought a serial to usb converter at radio shack and use that, it works every time.

lilpooh21186 · « **Reply #7 on:** June 25, 2009, 12:53:20 PM »

please excuse the link. it basicly searches for all usb-serial drivers and removes them some times an old driver will have conflict with a newer one. http://www.xenocron.com/install/USB-Board.htm scroll down click FTDI clean utility

Tim · « **Reply #8 on:** June 25, 2009, 02:27:45 PM »

Quote from: lilpooh21186 on June 25, 2009, 12:53:20 PM

please excuse the link. it basicly searches for all usb-serial drivers and removes them some times an old driver will have conflict with a newer one. http://www.xenocron.com/install/USB-Board.htm scroll down click FTDI clean utility

does it only do ftdi ones?

I think I need to use this but don't want to fuck myself. I'm tuning machines at my work and each one is set up basically like an ostrich with the ftdi usb-uart chipset. I plug in one machine that has anywhere from one to 12 of these little boards in there and they're loading on ports like 53, 54, 56... Doesn't bother me till I go to use my car shit and some software only looks for ports <4 etc. I'm stuck manually moving ports etc I assume I just have a shitload of ports tied up from machines' I've already tuned and shipped?

I just don't want it to fuck all my non ftdi devices

lilpooh21186 · « **Reply #9 on:** June 28, 2009, 09:25:41 PM »

in that case i personaly wouldnt risk it. cuzx i belive it wipes them all out.

News:

Author Topic: crome 1.5.3 (Read 7483 times)

lilpooh21186

crome 1.5.3

d112crzy

Re: crome 1.5.3

jagojon3

Re: crome 1.5.3

lilpooh21186

Re: crome 1.5.3

lilpooh21186

Re: crome 1.5.3

BangBusMaster

Re: crome 1.5.3

ifly87

Re: crome 1.5.3

lilpooh21186

Re: crome 1.5.3

Tim

Re: crome 1.5.3

lilpooh21186

Re: crome 1.5.3