:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1]   Go Down

Author Topic: How long...? NSFW  (Read 2191 times)

That Guy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 303
  • Fast and danger
How long...? NSFW
« on: June 26, 2009, 04:14:27 PM »

So i bought this 88 katana for 400$ cause the guy could never get it to run right after someone "rebuilt" the carbs.

Started taking parts off and then thought mayb i should grab a pic first lol

Anyways, put fuel in it and it stank and was leaking out the airbox, thought no problem, stuck float, big deal.
Opened up all the carb bottoms to clean and check float adjustment only to find this

Not on one carb but on TWO carbs

Supposed to look like this


Out came the JB

So it should be good, but for how long?

The floats are plastic and very light.
I drilled holes into both parts and put in some strands of speaker wire to act as rebar, hopefully it holds.

Anyone else think the vibration will make it drop off again? i may be underestimating the strength of jesus-bond tho


I said JB at least once in there so here is the other JB
« Last Edit: June 26, 2009, 04:16:17 PM by That Guy »
Logged

 fuck you more harder and with bigger letters.

93 Four Door  D16A6 SRP Eagle bottom, Factory rebuild up top. --->gtgtSplit fucking cylinder 1. detonation, you whore Welcome to the house that hate buil

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: How long...? NSFW
« Reply #1 on: June 26, 2009, 04:21:59 PM »

What, the pivot pin for the float had the mounts broken off?

IDK how the JB will hold up over time, sir, but I commend your resourcefulness and if they come off again seek the assistance of a TIG machine.   :noel:

That Guy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 303
  • Fast and danger
Re: How long...? NSFW
« Reply #2 on: June 26, 2009, 04:28:14 PM »

What, the pivot pin for the float had the mounts broken off?

IDK how the JB will hold up over time, sir, but I commend your resourcefulness and if they come off again seek the assistance of a TIG machine.   :noel:

Yep, the pivot pin, i hope the person that did the carbs didnt do any other work on the bike, now i have to check everything to make sure im not gonna lose a weel or something gay. I also have to recover the seats in black and paint tank to get rid of that damn blue issue lol
Logged

 fuck you more harder and with bigger letters.

93 Four Door  D16A6 SRP Eagle bottom, Factory rebuild up top. --->gtgtSplit fucking cylinder 1. detonation, you whore Welcome to the house that hate buil

SloS13

  • RHMT Ex-President
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: I am a geek!!
  • My avatar is broken
Re: How long...? NSFW
« Reply #3 on: June 26, 2009, 06:02:17 PM »

somebody gorilla'ed the shit out of those pin mounts.  Did they put the carb in a hydraulic press to get the pin out?
Logged

bryantaylor

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 526
Re: How long...? NSFW
« Reply #4 on: June 26, 2009, 06:03:31 PM »

JB weld holds up on fuel.  i actually have some sealing a fitting on my fuel line right now.  you should be fine.
Logged
90 miata - t3 and megasquirt
95 mark VIII
06 GSX-R 600
 i changed my sig as per Robb

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: How long...? NSFW
« Reply #5 on: June 26, 2009, 06:34:13 PM »

JB weld holds up on fuel.  i actually have some sealing a fitting on my fuel line right now.  you should be fine.

Though you will burn to a crisp.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

colt45

  • Mista Pimpsta
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8992
Re: How long...? NSFW
« Reply #6 on: June 26, 2009, 10:00:15 PM »

good score for $400

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: How long...? NSFW
« Reply #7 on: June 27, 2009, 12:16:47 AM »

this exact thing is one of my fears, float bowl sticking and fuel just pouring out the carbs while im driving down the road and then poof fucker turns into a fireball with me still on it.
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: How long...? NSFW
« Reply #8 on: June 27, 2009, 12:01:05 PM »

this exact thing is one of my fears, float bowl sticking and fuel just pouring out the carbs while im driving down the road and then poof fucker turns into a fireball with me still on it.

Sounds like something Hotrex would do :evil:
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

That Guy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 303
  • Fast and danger
Re: How long...? NSFW
« Reply #9 on: June 27, 2009, 03:10:37 PM »

this exact thing is one of my fears, float bowl sticking and fuel just pouring out the carbs while im driving down the road and then poof fucker turns into a fireball with me still on it.

lol

People have been known to pay money to watch that  :noel:
Logged

 fuck you more harder and with bigger letters.

93 Four Door  D16A6 SRP Eagle bottom, Factory rebuild up top. --->gtgtSplit fucking cylinder 1. detonation, you whore Welcome to the house that hate buil
Pages: [1]   Go Up