Topic: mr2 exhaust (Read 15391 times)

weirtech · « **on:** July 09, 2009, 09:58:23 PM »

i don't normally do full exhaust systems since i don't have a lift, but doing one of these is a bit easier.

97Econobox · « **Reply #1 on:** July 10, 2009, 10:25:14 AM »

Sweet Vband and a nice touch with teh name plaque on teh tip.

Solid as usual.

SDRAWKCAB · « **Reply #2 on:** July 10, 2009, 10:34:16 AM »

You make shit sick.

malichite · « **Reply #3 on:** July 11, 2009, 07:21:46 PM »

I have been doing some fab on my friends MR2. They are a royal pain in the ass in my mind. Solid work though. I like it!

CmR333 · « **Reply #4 on:** July 12, 2009, 09:06:55 PM »

the mr2 isnt to bad to work on, i have a 91 and its no worse tha working on a civic other than having to lean over the trunk to work on the engine. good job as always on the exhaust.

turbob16hatch · « **Reply #5 on:** July 12, 2009, 11:48:42 PM »

fab works look solid as usuall. something about turndown tips i don't like. other then the tips it is great. :yes:

Ntrain2k · « **Reply #6 on:** July 13, 2009, 10:06:58 AM »

Quote from: CmR333 on July 12, 2009, 09:06:55 PM

the mr2 isnt to bad to work on, i have a 91 and its no worse tha working on a civic other than having to lean over the trunk to work on the engine. good job as always on the exhaust.

The pics look like one of the newer spyders.

I doubt there is much in common with your '91.

Toysrme · « **Reply #7 on:** July 13, 2009, 07:32:00 PM »

mr2s are easy
but why didn't they give you $4-6k to drop a turbo 3vz-fe in it??? you should bring that up next time!

Conceptz-X · « **Reply #8 on:** July 13, 2009, 07:39:33 PM »

Umm that's an AW11 first gen

Nice work

weirtech · « **Reply #9 on:** July 13, 2009, 07:42:16 PM »

Quote from: Toysrme on July 13, 2009, 07:32:00 PM

mr2s are easy
but why didn't they give you $4-6k to drop a turbo 3vz-fe in it??? you should bring that up next time!

i've got another mk1 mr2 customer who just dropped off a 2009 renesis motor he wants mated up to his tranny. he obviously didn't think it through before he bought the motor... the starter mounts on the engine side which basically makes it impossible to make an adapter without modifying the bell housing and putting a different starter on it. pain in the ass. i think it'd be easier to put an mk2 tranny in it since the starter is on the tranny. guys have been doing the 3sgte swap for a while now on the mk1's.

Conceptz-X · « **Reply #10 on:** July 13, 2009, 07:48:07 PM »

The w52 tranny has 2 starter bosses if I remember right, one front, 1 rear.

Anyways I needed the rear location for my 20v luckily, I already had the trans before I did my swap

Toysrme · « **Reply #11 on:** July 13, 2009, 09:48:54 PM »

s retarded. send that shit back and put a toyota 3.0L v6 on it and turbo it on the way in. itll get better gas mileage and itll take the 3s-gte an extra 100hp (more if theyve swapped to a larger turbo) just to keep up.
wont say anything about a renesis swap, but its lack of powerband and spooing ability the same would likely be true for the i4's.
you show up with a stock engine 450hp and those i4's better be packing 600+ to even up.

hotrex · « **Reply #12 on:** July 16, 2009, 06:15:17 PM »

nameplate on one tip is tacky. shoulda put it on the muffler

Conceptz-X · « **Reply #13 on:** July 16, 2009, 06:45:43 PM »

STFU toys it would be a 4AGE car not a 3S

Joseph Davis · « **Reply #14 on:** July 16, 2009, 08:55:18 PM »

Renesis, as in the RX8 motor? The one that all the rotory guys grubbing together 20 year old 13B rebuilds call junk?

I'm sure it'll look crazy cool and run very well in such a light car, but that's an engine you want to live with IMO.

ratcityrex · « **Reply #15 on:** July 17, 2009, 10:47:13 AM »

Quote from: hotrex on July 16, 2009, 06:15:17 PM

nameplate on one tip is tacky. shoulda put it on the muffler

I agree. I dont reely like the way it looks on the tip. Other than that It looks tits. :yes:

Conceptz-X · « **Reply #16 on:** July 18, 2009, 09:58:19 AM »

Tig all the way around the emblem

dvst8r · « **Reply #17 on:** July 18, 2009, 12:04:43 PM »

Quote from: Conceptz-X on July 18, 2009, 09:58:19 AM

Tig all the way around the emblem

Not worth the added time investment, but I do agree it would have looked better on the muffler.

Conceptz-X · « **Reply #18 on:** July 18, 2009, 02:22:09 PM »

It would consume some time, but should look sweet

weirtech · « **Reply #19 on:** July 18, 2009, 08:00:01 PM »

welding around the whole emblem would be very difficult to do since it is so small and not a square like the full race tags.

the muffler already has "magnaflow" stamped into it. i didn't make the muffler, so the tag goes on part of the exhaust that is visible. if the customer didn't want that, they'd get their exaust done some place that doesn't give a shit about the work they do.

Passenger · « **Reply #20 on:** July 19, 2009, 02:12:24 PM »

Projection welding would look the nicest. Personally not a fan of tagging work though, doesn't look clean IMO.

News:

Author Topic: mr2 exhaust (Read 15391 times)