:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Official RHMT TANK! that's right i said a TANK! (link)

Pages: [1]   Go Down

Author Topic: wet sanding, what compound do i move on to?  (Read 4570 times)

special ed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 981
wet sanding, what compound do i move on to?
« on: October 11, 2009, 06:41:29 PM »
just finished with the 2000 grit on my car and i tried the turtle wax swirl/scratch remover, but it wasn't strong enough.  what do i use next?

i had a rubbing compound that i used a while back that left a nasty cloud, but the turtle wax cleared it up.  i just don't remember what it was.
Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: wet sanding, what compound do i move on to?
« Reply #1 on: October 11, 2009, 06:54:46 PM »
I don't wet sand flat black. If you're using turtle wax you should probably just quit.
Logged
92GSR - mild interest

special ed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 981
Re: wet sanding, what compound do i move on to?
« Reply #2 on: October 11, 2009, 07:05:48 PM »
Quote from: brine04 on October 11, 2009, 06:54:46 PM
I don't wet sand flat black. If you're using turtle wax you should probably just quit.

sweet.  you are completely useless.  the turtle wax is what i had around.  i don't work at the dealer anymore so i have no idea what to work with because i don't have a supply of 3M materials and a buffer.

anyone else care to give some advice?
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: wet sanding, what compound do i move on to?
« Reply #3 on: October 11, 2009, 07:14:23 PM »
go back to 800 grit if the scratches are too deep to get out with 2000, you went to fast and didnt get the bigger scratches out with the lower grit paper.
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: wet sanding, what compound do i move on to?
« Reply #4 on: October 11, 2009, 07:15:56 PM »
the tutorial isnt so great, but the products are the best ever. with proper technique you can get away with just the
 3Mâ„¢ Perfect-Itâ„¢ III Extra Cut
Rubbing Compound, PN 4350

thats what i do on air show planes

http://www.autobodytoolmart.com/Paint_Finish_Tutorial.html
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

Hotrodlincoln

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1767
Re: wet sanding, what compound do i move on to?
« Reply #5 on: October 11, 2009, 07:23:07 PM »
If you don't have a buffer you're pretty much pissing up a rope. By the way, maby you should get a rope.
Logged
kill yourself piss face

Stealthmode

  • Mufukkken 5 black Star General
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 20246
Re: wet sanding, what compound do i move on to?
« Reply #6 on: October 11, 2009, 07:30:35 PM »
Quote from: special ed on October 11, 2009, 07:05:48 PM


anyone else care to give some advice?

Lay face down in a stream?
Logged
I think Stealthmode has a few children in some of his socks. I picked up one of his socks thinking it was mine and it was crunchy. Now I spend all day wondering what the hell might be laying eggs under my fingernails.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: wet sanding, what compound do i move on to?
« Reply #7 on: October 11, 2009, 09:00:50 PM »
Quote from: Stealthmode on October 11, 2009, 07:30:35 PM
Quote from: special ed on October 11, 2009, 07:05:48 PM


anyone else care to give some advice?

Lay face down in a stream?

Have sex with hotrex's old lady, don't use a condom?
Logged

special ed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 981
Re: wet sanding, what compound do i move on to?
« Reply #8 on: October 11, 2009, 09:21:22 PM »
haha i miss you steve.  it's actually pretty well blended.  i have an orbital buffer, but those are useless when it comes to stuff like this.  might as well try it.

Quote from: SecksyPeePee on October 11, 2009, 07:15:56 PM
the tutorial isnt so great, but the products are the best ever. with proper technique you can get away with just the
 3Mâ„¢ Perfect-Itâ„¢ III Extra Cut
Rubbing Compound, PN 4350

thats what i do on air show planes

http://www.autobodytoolmart.com/Paint_Finish_Tutorial.html

ill see what i can find here, there aren't as many products available in nova scotia.  i didn't even look to see if they had anything higher than 3000, i bet life would be easier if i could go finer.
Logged

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: wet sanding, what compound do i move on to?
« Reply #9 on: October 12, 2009, 02:11:41 AM »
i would use a 3M rubbing compound followed by Perfect-IT III like said above.

worked well on my car.

make sure you have a real rotary buffer or a good DA.

only use one compound per pad.
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

buk9tp

  • Guest
Re: wet sanding, what compound do i move on to?
« Reply #10 on: October 12, 2009, 02:33:53 AM »
Quote from: Joseph Davis on October 11, 2009, 09:00:50 PM
Quote from: Stealthmode on October 11, 2009, 07:30:35 PM
Quote from: special ed on October 11, 2009, 07:05:48 PM


anyone else care to give some advice?

Lay face down in a stream?

Have sex with hotrex's old lady, don't use a condom?

fuck hotrex in the ass then fuck him in his eye socket? ass to eye?
Logged

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: wet sanding, what compound do i move on to?
« Reply #11 on: October 12, 2009, 08:05:18 AM »
Quote from: special ed on October 11, 2009, 09:21:22 PM
  i didn't even look to see if they had anything higher than 3000, i bet life would be easier if i could go finer.

1500 is all you need if you are using a real buffer. those DA type polishers are junk for anything more than removing wax residue. harbor freight has a nice buffer on sale right now if you have those there or you could just order online
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

colt45

  • Mista Pimpsta
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8992
Re: wet sanding, what compound do i move on to?
« Reply #12 on: October 12, 2009, 04:42:59 PM »
Quote from: Scruffy Terror on October 12, 2009, 02:33:53 AM
Quote from: Joseph Davis on October 11, 2009, 09:00:50 PM
Quote from: Stealthmode on October 11, 2009, 07:30:35 PM
Quote from: special ed on October 11, 2009, 07:05:48 PM


anyone else care to give some advice?

Lay face down in a stream?

Have sex with hotrex's old lady, don't use a condom?

fuck hotrex in the ass then fuck him in his eye socket? ass to eye?

invest in enron?
Logged

Adam Lofton

  • Guest
Re: wet sanding, what compound do i move on to?
« Reply #13 on: October 12, 2009, 11:24:10 PM »
If you are looking for a real shine you would step up to 2500 grit. But since it is not a show car, you are going to need a course "cutting" compound, then a fine polish after that. The course should feel a like a gritty paste and the fine should contain aluminum oxide.
Logged

special ed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 981
Re: wet sanding, what compound do i move on to?
« Reply #14 on: October 13, 2009, 08:32:33 AM »
Quote from: Adam Lofton on October 12, 2009, 11:24:10 PM
If you are looking for a real shine you would step up to 2500 grit. But since it is not a show car, you are going to need a course "cutting" compound, then a fine polish after that. The course should feel a like a gritty paste and the fine should contain aluminum oxide.

and i think that is what i had before but i didn't intend on it haha.  wish i still had it around, going to pick it up after work.
Logged

Adam Lofton

  • Guest
Re: wet sanding, what compound do i move on to?
« Reply #15 on: October 13, 2009, 10:46:39 PM »
Just go to a car wash, set a fire in the bathroom, them make off with all the detail supplies during the confusion.

Shine = $0.00

 :)
Logged

special ed

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 981
Re: wet sanding, what compound do i move on to?
« Reply #16 on: October 22, 2009, 10:39:05 AM »
i finally got around to getting an extension cord for the buffer.  i gave a shot with the fine compound on my orbital and it cleaned up well, so i am going to pick up the coarser compound and an angle buffer soon and go at it again.

should have taken a before pic, but it looks so much better even now.  i will get pics of the next project, which is a rusted chip  :?:
Logged
Pages: [1]   Go Up
« previous next »