Topic: some fab work and shit (Read 10673 times)

Corey · « **on:** October 14, 2009, 01:32:17 AM »

i rounded up some pictures. i really hope toysrme will give me his great knowledgeable advice so i can become better at welding like him.

conquest/starion top mount and some manhorns

local setup for T4/SC6262 i built last week.

mini ram for an B series in an EF chassis with a full size rad and A/W IC.

dsm crap

evo 8 ramhorn

a collector for a mani design im gonna try out.

SDRAWKCAB · « **Reply #1 on:** October 14, 2009, 01:58:50 AM »

Shits hot

turbob16hatch · « **Reply #2 on:** October 14, 2009, 04:12:19 AM »

looks good corey. thanks for posting up your shit.

CSaddict · « **Reply #3 on:** October 14, 2009, 06:15:23 AM »

Great as always Corey. :yes:

t_cel_t · « **Reply #4 on:** October 14, 2009, 09:46:17 PM »

how the fuck do you weld those runners right at the collector?-talking about the ramhorns. do you weld the collector together last?

snm95ls · « **Reply #5 on:** October 14, 2009, 09:58:44 PM »

Quote from: Corey on October 14, 2009, 01:32:17 AM

i rounded up some pictures. i really hope toysrme will give me his great knowledgeable advice so i can become better at welding like him.

conquest/starion top mount and some manhorns
...mini ram for an B series in an EF chassis with a full size rad and A/W IC.

...

Wow! very nice. How much would a manifold and DP like that set someone back?

Nice work.

88dx · « **Reply #6 on:** October 14, 2009, 10:06:51 PM »

When are you going to sponsor me with one of those manifolds ;D.

everything looks badass man :yes: Do you mostly do local sales

I dont see you post stuff for sale

Corey · « **Reply #7 on:** October 14, 2009, 10:59:43 PM »

steve i do a lot of local stuff, i do online sales but i sell them to someone else that sells them. thats the only person i sell them to online unless someone contacts me about one.

Quote from: snm95ls on October 14, 2009, 09:58:44 PM

Quote from: Corey on October 14, 2009, 01:32:17 AM
i rounded up some pictures. i really hope toysrme will give me his great knowledgeable advice so i can become better at welding like him.

conquest/starion top mount and some manhorns
...mini ram for an B series in an EF chassis with a full size rad and A/W IC.

[img]http://i144.photobucket.com/albums/r193/goldhatch94/crxpictures005.jpg[/img
[IMG]http://i30.photobucket.com/albums/c320/coreyr1/064.jpg[/img
...

Wow! very nice. How much would a manifold and DP like that set someone back?

Nice work.

mid $600 range

Quote from: t_cel_t on October 14, 2009, 09:46:17 PM

how the fuck do you weld those runners right at the collector?-talking about the ramhorns. do you weld the collector together last?

i weld the collector up before the mani is built, and weld the runner to the collector last. its not as hard as it looks, for me anyways.

snm95ls · « **Reply #8 on:** October 14, 2009, 11:02:50 PM »

Quote from: Corey on October 14, 2009, 10:59:43 PM

Not bad at all.

88dx · « **Reply #9 on:** October 14, 2009, 11:14:02 PM »

Is most of this one off stuff or do you have jigs? Im jealous of all the fab work you guys post I still weld like im blind

Corey · « **Reply #10 on:** October 14, 2009, 11:19:26 PM »

the only jig i use is my collector jig for cutting collectors. other then that i freehand everything.

88dx · « **Reply #11 on:** October 14, 2009, 11:23:50 PM »

So is the last collector for a top mount? I though about doing one like that because it seems easier

crxvtec91 · « **Reply #12 on:** October 14, 2009, 11:25:57 PM »

How much for a dp? Have a top mount I am going to need a dp for.

Corey · « **Reply #13 on:** October 14, 2009, 11:47:24 PM »

Quote from: 88dx on October 14, 2009, 11:23:50 PM

So is the last collector for a top mount? I though about doing one like that because it seems easier

nah bottom mount, could probably make a top mount pretty easy with one.

if you want a price on something pm me.

klyph · « **Reply #14 on:** October 15, 2009, 03:23:44 AM »

Quote from: Toysrme

Horrible gas coverage, Way too much amperage, poor penetration, there will be stress cracks at every weld that you crystallized, due to your poor management of heat and filler application...

Corey · « **Reply #15 on:** October 15, 2009, 11:51:06 AM »

patsmx5 · « **Reply #16 on:** October 15, 2009, 01:11:29 PM »

Shit is purrdy. I love that collector in pic 3. Looks tits.

monty007 · « **Reply #17 on:** October 15, 2009, 01:24:49 PM »

really nice welds!!

chris · « **Reply #18 on:** October 19, 2009, 06:55:25 PM »

Quote from: klyph on October 15, 2009, 03:23:44 AM

Quote from: Toysrme
Horrible gas coverage, Way too much amperage, poor penetration, there will be stress cracks at every weld that you crystallized, due to your poor management of heat and filler application...

I agree.

Looks great. Ill agree with steve compared to the rest of alot of you guys my welding sucks major ballzz. I still want to buy a tig one of these days just spending the money on one never seems to be there.

Towdogg · « **Reply #19 on:** October 19, 2009, 07:37:57 PM »

Very nice work...... Are you in conn.....

weirtech · « **Reply #20 on:** October 19, 2009, 08:15:00 PM »

nice work, now buy some more flanges.

to answer the last question, yes, corey is in conn.

Towdogg · « **Reply #21 on:** October 19, 2009, 08:20:16 PM »

Thats kinda local.....I am in Rhode Island..... Im gonna start saving......

JACER63 · « **Reply #22 on:** October 20, 2009, 12:26:27 AM »

your work looks really solid man...nice job

Joseph Davis · « **Reply #23 on:** October 20, 2009, 01:21:39 AM »

Quote from: CSaddict on October 14, 2009, 06:15:23 AM

Great as always Corey. :yes:

Yeah, I see why you recommended him to me.

Corey · « **Reply #24 on:** October 20, 2009, 02:41:53 AM »

Quote from: Towdogg on October 19, 2009, 08:20:16 PM

Thats kinda local.....I am in Rhode Island..... Im gonna start saving......

central ct. 15 mins from hartford. anytime your ready.

gdout90accord · « **Reply #25 on:** December 25, 2009, 12:35:22 AM »

you got pm

danz · « **Reply #26 on:** December 25, 2009, 07:45:55 PM »

oczc ftw.

Joseph Davis · « **Reply #27 on:** December 25, 2009, 07:49:10 PM »

Quote from: gdout90accord on December 25, 2009, 12:35:22 AM

you got pm

It didn't make it through, try again.

rdtech · « **Reply #28 on:** December 31, 2009, 01:49:19 AM »

sick work.

1991civicsi · « **Reply #29 on:** December 31, 2009, 03:32:56 AM »

One day when I get my Buick GN Ill contact you to for a manifold.

News:

Author Topic: some fab work and shit (Read 10673 times)

chris