Topic: damn canadian scammers (Read 3346 times)

HiProfile · « **on:** November 05, 2009, 03:10:39 PM »

Well I'm not sure if this Canadian guy is just a dunce or not, but long story short:

18 days ago I paid for a stock GSR manifold, fuel rail, TB, iab vac box, and IACV. Finally got it yesterday - it is missing the IACV, TPS is cracked (expected), metal vac tubes are bent all over, and to top it off ... GIANT CRACK through half of runner #4. FYI this was from H-T.com, only place I could find a "complete" GSR intake manifold.

So I filed a complaint with paypal, and plan on getting whatever I can for it w/o shipping back. Otherwise he's paying for overnight'ing it back to Winnipeg from Wisconsin. Regardless of the outcome, I'll get my money back. The credit card company I used to pay with is awsome, and will definately give me a charge-back since I always document the shit out of my purchases.

Cliffs: don't trust canadians from Honda-tech. $:-\$

BTW can anyone find me a dyno comparison of a stock GSR intake vs Skunk2/etc intake manifold? All I can find are everything-stock vs intake+full boltons.

dvst8r · « **Reply #1 on:** November 05, 2009, 03:51:52 PM »

From Winnipeg, fuck he was probably Metis, and had just car jacked an American for the motor. He is now getting high huffing the left over gasoline in the tank.

Urban Indian · « **Reply #2 on:** November 05, 2009, 04:33:20 PM »

pics of said crack

Teg2boo · « **Reply #3 on:** November 05, 2009, 04:36:08 PM »

JBWeld?

HiProfile · « **Reply #4 on:** November 05, 2009, 08:11:29 PM »

If you look in the pic he sent, you can see the oily line at the base of runner #4 (closest). In my pic, you can see how oil leaked from the crack, besides where I wiped it off to make it visible. Another thing to note is the coolant tube below the throttle body (barely visible) - it's bent & twisted 180* the wrong way. It's not a big deal itself, but shows there were 2 visbile defects BEFORE he shipped it. I think he's going to try claim insurance, otherwise I'll fight for every dollar through paypal, and through the CC if needed.

click for super-size CRACK:

An original he sent me

Picture I took today:

Quote from: Teg2boo on November 05, 2009, 04:36:08 PM

JBWeld?

Think it will help hold 20psi of boost?

brine04 · « **Reply #5 on:** November 05, 2009, 08:18:33 PM »

Quote from: dvst8r on November 05, 2009, 03:51:52 PM

From Winnipeg, fuck he was probably Metis, and had just car jacked an American for the motor. He is now getting high huffing the left over gasoline in the tank.

+1 one then he will buy meth or propane with the money from the manifold.

chris · « **Reply #6 on:** November 05, 2009, 08:30:17 PM »

Insurance on shipping items will result in denial unless 2 factors

One its just plain lost
or The shipping company before delivery takes not of the damage and you are let known before it is delivered to you. This has only happened to me once in thousands of packages shipped/sent. The box was literally smashed in half and looked like a pallet fell on it. If not they will gladly throw the claim in the trash

If they let cases like this result in free money for a guy shipping broken parts to begin with then showing uo broken shipping companies would be broker than United states banking system

Regarding the gsr manifold vs aftermarket gsr based manifolds they make 6-8 whp on stock motors. Pro products manifold gsr manifold was my fav for the cheap price but they no longer offer them due to the typical story of today no sales=parts collecting dust=you go bankrupt

junkyard racer · « **Reply #7 on:** November 05, 2009, 08:30:59 PM »

Quote from: HiProfile on November 05, 2009, 08:11:29 PM

Think it will help hold 20psi of boost?

yes.

or just take it to a alum weld shop and have them weld it up.

chris · « **Reply #8 on:** November 05, 2009, 08:32:47 PM »

Or just buy another gsr manifold bare they arent worth much 20 bucks at most. Finding one local shouldnt be hard since gsr manifolds are usually thrown away by most.

welding would cost more than finding another bare one

patsmx5 · « **Reply #9 on:** November 05, 2009, 08:35:44 PM »

when I took the direct port nitrous off my manifold I just sprayed the four holes in the runners with brake parts cleaner and then stuck a blob of JB-stick weld on/in them to fill the holes. Been boosted for 11 months now and I've pressure tested the manifold/charge pipes to 28 PSI, shit don't leak.

Teg2boo · « **Reply #10 on:** November 05, 2009, 09:50:05 PM »

See in the fab section when we talked about brazing aluminium, might be an option?

I don't know how well it works on cast tho... It cost 3$

HiProfile · « **Reply #11 on:** November 06, 2009, 12:32:09 AM »

The problem is aluminum cracks like to propogate (spread). If I keep the manifold, I'll probably give it a shot though. I have some devcon alum epoxy that works tits on alum. I'll drill the ends, try to open/clean the crack with acid or something, then try to create a vacuum deal to force it into the crack.

The main problem is that I paid a bit extra because he promised it was a complete manifold, minus iat+map. Instead I get a pile of shit that looks like a crack whore's snatch. Around here the only people that have extra crap are the Hmongs, which hord parts and severely overcharge for them. Statistically they are the 2nd biggest drain on welfare in my area, behind

's. I hate them extra over regular asians.

BTW I'm not holding my breath for the insurance. It's mainly just so people are forced to get a tracking # and actually send it. I've had non-insured stuff magically disappear, but never insured stuff. Regardless, this guy is up a creek given the evidence. The paypal note even describes I should have received an IACV and everything in working order, in case paypal ever looks into it.

Teg2boo · « **Reply #12 on:** November 06, 2009, 01:19:35 AM »

You should never thrust a Canadian other than on this site.

It's not ok if the canadian is named Henry

g_shok · « **Reply #13 on:** November 07, 2009, 01:35:58 PM »

Canuks

chris · « **Reply #14 on:** November 07, 2009, 03:56:27 PM »

You should of posted a wtb here I parted out a gsr longblock that cracked a piston a couple weeks back

Post wtb's here first you will be surprised just how much crap my white trash ass as alone that people need.

klyph · « **Reply #15 on:** November 07, 2009, 05:26:47 PM »

Super Dipper · « **Reply #16 on:** November 07, 2009, 11:45:47 PM »

Quote from: c0mpl3x on November 07, 2009, 03:57:00 PM

quadtech/supper diaper bought a dizzy off of me and didn't include an address with his paypal

that just makes me an idiot, not a scammer!

HiProfile · « **Reply #17 on:** November 09, 2009, 03:05:01 PM »

Quote from: chris M on November 07, 2009, 03:56:27 PM

You should of posted a wtb here I parted out a gsr longblock that cracked a piston a couple weeks back

Post wtb's here first you will be surprised just how much crap my white trash ass as alone that people need.

Yeah, I know that now. But till that point I've always had good luck anywhere, as long as it was not Canadian.

A while back I got some SRP pistons, that turned out to be A) used, B) beat to piss with iron chunks pressed into the crown. Guess where the seller lived - FUCKING CANADA.

dvst8r · « **Reply #18 on:** November 09, 2009, 03:30:23 PM »

Quote from: HiProfile on November 09, 2009, 03:05:01 PM

A while back I got some SRP pistons, that turned out to be A) used, B) beat to piss with iron chunks pressed into the crown. Guess where the seller lived - FUCKING CANADA.

We are working hard to be the Nigeria of the north.

Joseph Davis · « **Reply #19 on:** November 09, 2009, 04:39:00 PM »

Quote from: HiProfile on November 09, 2009, 03:05:01 PM

Quote from: chris M on November 07, 2009, 03:56:27 PM
You should of posted a wtb here I parted out a gsr longblock that cracked a piston a couple weeks back

Post wtb's here first you will be surprised just how much crap my white trash ass as alone that people need.

Yeah, I know that now. But till that point I've always had good luck anywhere, as long as it was not Canadian.

A while back I got some SRP pistons, that turned out to be A) used, B) beat to piss with iron chunks pressed into the crown. Guess who the seller was - FUCKING BAC.

True story.

chris · « **Reply #20 on:** November 09, 2009, 04:46:07 PM »

I always have problems with people from Florida.

brine04 · « **Reply #21 on:** November 09, 2009, 10:59:11 PM »

I got scammed once back in the day... by an American.

Urban Indian · « **Reply #22 on:** November 10, 2009, 05:16:41 AM »

I havent been scammed yet.......... this is hopeful

klyph · « **Reply #23 on:** November 11, 2009, 01:12:56 AM »

Quote from: Urban Indian on November 10, 2009, 05:16:41 AM

I havent been scammed yet.......... this is hopeful

You're an Indian, you do the scamming.

Joseph Davis · « **Reply #24 on:** November 11, 2009, 01:26:21 AM »

I just got double Henried this evening my two different FRENCH Canadian scammers known as Jay Cleto and Thomas Sewell. Fuck my life.

DRQPQUT · « **Reply #25 on:** November 11, 2009, 02:31:52 AM »

i got fucked by a new yorker....surprise :yes: ching chong pow turbo
misc. 3in alum. bends
shitty shitty shitty kitchen stainless turbo manifold
ebay intercooler
660cc injectors turned out to be DSM injectors
all the above for the low price of 1700.00 3years ago.......

Teg2boo · « **Reply #26 on:** November 11, 2009, 08:40:51 AM »

Quote from: DRQPQUT on November 11, 2009, 02:31:52 AM

i got fucked by a new yorker....surprise :yes: ching chong pow turbo
misc. 3in alum. bends
shitty shitty shitty kitchen stainless turbo manifold
ebay intercooler
660cc injectors turned out to be DSM injectors
all the above for the low price of 1700.00 3years ago.......

1700$!!! You really get fucked!

I always get scammed by American on ebay... I can say 1/5 things I bought I've been scammed. I am at 74... I've been scammed 15 times

g_shok · « **Reply #27 on:** November 12, 2009, 09:23:40 PM »

http://www.realhomemadeturbo.com/forum/index.php?topic=677.msg11225#msg11225

News:

Author Topic: damn canadian scammers (Read 3346 times)

chris

junkyard racer

chris

chris

chris