Topic: Crome, random CEL a little PRON too (Read 6033 times)

PhilStubbs · « **on:** November 10, 2009, 03:36:47 PM »

So, i stuck a b18a1 into an eg. i am using all of the sensors on the LS except an obd1 distributor and a chipped po6 ecu. it runs great, but after a few min of running, i get a CEL, but with no code. i have tried disabling everything in Crome. im lost. first time i have had a no code CEL before. it also randomly gets a code 29, but thats very random and not often.

I have been into Gianna Michaels lately, so thats what you get.

d112crzy · « **Reply #1 on:** November 10, 2009, 03:46:20 PM »

Solid cel. Either something is wrong with your ecu or your chip/map.

d112crzy · « **Reply #2 on:** November 10, 2009, 04:00:23 PM »

You mean j12? That shouldn't affect anything except being able to actually datalog.

PhilStubbs · « **Reply #3 on:** November 10, 2009, 06:00:29 PM »

j12 is cut. i have been using this ecu for months on a vitara setup with no issues and i have tuned 80-100 cars so im figuring my map is fine.

i am kind of leaning towards my ostrich cable. if i touch it while its running, i get a CEL for sure

any chance there is an issue with one of the obd0 sensors with the obd1 ecu?

Joseph Davis · « **Reply #4 on:** November 10, 2009, 09:11:43 PM »

Quote from: SecksyPeePee on November 10, 2009, 06:00:29 PM

i am kind of leaning towards my ostrich cable. if i touch it while its running, i get a CEL for sure

And you have to ask?

News:

Author Topic: Crome, random CEL a little PRON too (Read 6033 times)

PhilStubbs

Crome, random CEL a little PRON too

d112crzy

Re: Crome, random CEL a little PRON too

d112crzy

Re: Crome, random CEL a little PRON too

PhilStubbs

Re: Crome, random CEL a little PRON too

Joseph Davis

Re: Crome, random CEL a little PRON too