:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: Downpipes and deckheight, b16 and b18  (Read 12617 times)

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Downpipes and deckheight, b16 and b18
« on: March 17, 2009, 04:02:35 AM »
So I want to make 2 manifolds for my venture into b-series. I've got a b16a3 sol now (beater) which I'll eventually turbo, and I'll eventually be putting a built b18a1 into my turbo d16 coupe (ls head 1st, then ls-v). I'd be using the b18a1 for mockup. I want to make manifolds/downpipes that will work on both. I know the B18 deckheight is ~.3" more and the oil pans are basicly the same, but what about the exhaust flange itself? Is it higher/lower, or stick out more/less between the LS and b16 heads?

I know its probably not enough to worry about, but I don't want to spend time on something that won't fit. :?:
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

weirtech

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2341
    • Weir Technologies Inc.
Re: Downpipes and deckheight, b16 and b18
« Reply #1 on: March 17, 2009, 08:34:38 AM »
the only difference is the block height.  everything else i pretty basically the same.  as long as the dp clearance isn't super tight to the oil pan on a b16 specific setup it should fit any other b series.
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: Downpipes and deckheight, b16 and b18
« Reply #2 on: March 18, 2009, 01:44:59 AM »
Even the GSR? I thought there was even less space due to the girdle deal. Not that it matters to me much, just good to know if I sell stuff.

I'm not exactly a B-guy. I've always had D's to motorboat... :P
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Corey

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3030
Re: Downpipes and deckheight, b16 and b18
« Reply #3 on: March 19, 2009, 02:09:37 AM »
i built a mini ram with a downpipe for a local guy with a 99 SI 2 weeks ago and mocked it all up on an LS. i just used one of these really thick ching chong turbo gaskets and built the DP so you could just fit a piece of paper in between the oil pan and dp and it fit the B16 perfect.
Logged
Pages: [1]   Go Up
« previous next »