:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Rim and bore question  (Read 3758 times)

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567
Rim and bore question
« on: November 29, 2009, 11:05:08 PM »
Stock Integra Hub bore is 56.1mm if im not mistaken. And I want to get some Rota Slips that are 67.1mm .Now if thats the case the only thing centering my rims will b the lug nutz. So does that mean I need some kind of hub adapter to fill that gap so I dont put all the stress on the lug nutz.

Or am i over analyzing this and it doesn't mean shit.
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!

JACER63

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 167916
  • well shit..
Re: Rim and bore question
« Reply #1 on: November 29, 2009, 11:07:25 PM »
you are thinking way to hard....  should be fine with the lugs centering the wheel.
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: Rim and bore question
« Reply #2 on: November 29, 2009, 11:32:55 PM »
i never use hubcentric rings and have never had a problem with rims centering
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

Ravage70

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6286
  • The Hotrex foot. Stiletto ready!
Re: Rim and bore question
« Reply #3 on: November 30, 2009, 12:46:46 AM »
get some centering rings from the fucken tire dealer
Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: Rim and bore question
« Reply #4 on: November 30, 2009, 04:51:33 PM »
Quote from: Cooljnateman on November 29, 2009, 11:05:08 PM
Stock Integra Hub bore is 56.1mm if im not mistaken. And I want to get some Rota Slips that are 67.1mm .Now if thats the case the only thing centering my rims will b the lug nutz. So does that mean I need some kind of hub adapter to fill that gap so I dont put all the stress on the lug nutz.

Or am i over analyzing this and it doesn't mean shit.


I'm calling bullshit on this..........  You are not getting new wheels and tires!
Logged

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Rim and bore question
« Reply #5 on: November 30, 2009, 05:14:21 PM »
Quote from: t_cel_t on November 29, 2009, 11:32:55 PM
i never use hubcentric rings and have never had a problem with rims centering
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

lilpooh21186

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1801
  • B16 Short strokes but holds a high note
Re: Rim and bore question
« Reply #6 on: November 30, 2009, 05:34:41 PM »
just bolt them up you will never know the difference bullshit X2
Logged
Ecu chipping
basmaps
tuning Dyno/street pm for details
Neptune Dealer PM for RTP details

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Rim and bore question
« Reply #7 on: November 30, 2009, 08:37:29 PM »
Quote from: lilpooh21186 on November 30, 2009, 05:34:41 PM
just bolt them up you will never know the difference bullshit X2
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

Cooljnateman

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 567
Re: Rim and bore question
« Reply #8 on: November 30, 2009, 09:49:12 PM »
Drag Dr-23's Black already purchased  8) 15"

Only going on after winter though, cuz by then I will hopefully have money for tires, 385 shipped for, rims all the lug nutz and installation kit with hubcentrics that ill need.

Chuck i told you i got that money, so im ready to re boost as soon as possible but we can b patient.
Logged
Integra LS-T nbspnbsp 221.5 Hp 215.5 TQ 5.5psi Dyno-Max add 8-10% and for DynoJet numbers HATERS!
Pages: [1]   Go Up
« previous next »