Topic: Felpro releases new line of intake manifold gaskets... (Read 7766 times)

Foowee · « **on:** December 05, 2009, 03:36:02 PM »

Just gotta buy the valve cover gasket kit with it...

HiProfile · « **Reply #1 on:** December 05, 2009, 04:36:48 PM »

Lol, someone recently said an old truck they got had basicly all the gaskets made of cardboard.

And tell that long-haired girl in the pic to get some boobs.

turbostd · « **Reply #2 on:** December 05, 2009, 08:43:41 PM »

Quote from: HiProfile on December 05, 2009, 04:36:48 PM

Lol, someone recently said an old truck they got had basicly all the gaskets made of cardboard.

And tell that long-haired girl in the pic to get some boobs.

ya that was me lol. cardboard works fine ive made a few throttle body gaskets from it as they are hard to get for some reason. Hell older v8s like the flat-head ford used tar coated rope for a rear main seal lol.

HiProfile · « **Reply #3 on:** December 06, 2009, 09:30:45 PM »

Rope seals are the worst invention ever. I helped my neighbor with enough pontiac 400 rebuilds to stay away.

patsmx5 · « **Reply #4 on:** December 06, 2009, 10:27:01 PM »

Quote from: HiProfile on December 06, 2009, 09:30:45 PM

Rope seals are the worst invention ever. I helped my neighbor with enough pontiac 400 rebuilds to stay away.

Stuffing box on a boat = tighten ever day. Yeap, rope sucks.

Ravage70 · « **Reply #5 on:** December 06, 2009, 11:15:06 PM »

I predict the cardboard become soggy at the water hole and possibly blowing air into the pipe during boost.

Robb · « **Reply #6 on:** December 06, 2009, 11:30:40 PM »

Foowee = Hardcore motherfucker.

ironcrx · « **Reply #7 on:** December 06, 2009, 11:38:11 PM »

Quote from: Ravage70 on December 06, 2009, 11:15:06 PM

I predict the cardboard become soggy at the water hole and possibly blowing air into the pipe during boost.

Who cares. This is rhmt!

ochoa · « **Reply #8 on:** December 07, 2009, 12:13:41 AM »

i know a meat head v8 kid who tried telling me corgated cardboard gaskets are better than any thing u can buy yes corgated with all the ribs and spaces inbetween

ApexSilver06MR · « **Reply #9 on:** December 07, 2009, 12:59:43 AM »

well fowee did have the brakekleen charge piping

Eggylshatch · « **Reply #10 on:** December 07, 2009, 01:10:44 AM »

i just use rtv silicone for everything. The copper high temp shit, because I'm ballur like that.

crttaz · « **Reply #11 on:** December 07, 2009, 03:23:35 AM »

Fowee, I was joking when I said it would work!!!!!!

Thanks for the help tonight, I have a 3/4 clogged heater core.

To get it out requires pulling the dash.......well that will mean a perfect time to swamp in a Civic Dash right?

?

PhilStubbs · « **Reply #12 on:** December 07, 2009, 10:18:31 PM »

older flat airplane engines use thread between the 2 case halves.

Urban Indian · « **Reply #13 on:** December 07, 2009, 11:20:14 PM »

I am no stranger to Orange High Temp intake mani gaskets.

Pistol made my first one

jagojon3 · « **Reply #14 on:** December 08, 2009, 12:02:36 AM »

I hate that orange copper gasket shit, IMO it's just a sign of failure.

92CXyD · « **Reply #15 on:** December 08, 2009, 12:03:03 AM »

All you need is cereal boxes. :yes:

Vagitarian · « **Reply #16 on:** December 08, 2009, 04:29:24 AM »

triple stacked fruit loops boxes ftmfw

Foowee · « **Reply #17 on:** December 08, 2009, 08:11:30 AM »

Quote from: Ravage70 on December 06, 2009, 11:15:06 PM

I predict the cardboard become soggy at the water hole and possibly blowing air into the pipe during boost.

This was for my 70hp cx motor. It will never see boost. I used honda bond around the coolant n egr holes. It's been in there for a week now, still holding...

Vagitarian · « **Reply #18 on:** December 08, 2009, 08:59:18 AM »

Why even use a gasket if you have hondabond at hand

PhilStubbs · « **Reply #19 on:** December 08, 2009, 08:59:35 AM »

the thing to do for the coolant holes is to get a couple orings and lightly RTV them into the gasket. you might have to double up the gasket for the thickness of the o-rings though

Phate · « **Reply #20 on:** December 08, 2009, 09:13:17 PM »

does bisi know you stole the design of his heat shielding intake manifold gasket?

crttaz · « **Reply #21 on:** December 09, 2009, 04:25:19 AM »

'Bisi has no idea what you are talking about.

DmC · « **Reply #22 on:** December 09, 2009, 04:34:45 AM »

Bisi had no idea who he was talking to or he would have pulled up a lawn chair sat down and asked you what a transmission was.
I also have a clogged heater core

jagojon3 · « **Reply #23 on:** December 09, 2009, 05:34:07 AM »

Quote from: crttaz on December 09, 2009, 04:25:19 AM

'Bisi has no idea what you are talking about.

crttaz · « **Reply #24 on:** December 09, 2009, 06:18:08 AM »

Quote from: DmC on December 09, 2009, 04:34:45 AM

Bisi had no idea who he was talking to or he would have pulled up a lawn chair sat down and asked you what a transmission was.
I also have a clogged heater core

We did talk trannies.....he asked my opinion on Houseman.

DmC · « **Reply #25 on:** December 09, 2009, 10:39:20 AM »

Quote from: danwjmu on December 09, 2009, 08:44:18 AM

$100 says Bisi is familiar with boy pussy.

News:

Author Topic: Felpro releases new line of intake manifold gaskets... (Read 7766 times)