Topic: im an idiot, see if what i did isnt toooo bad. (Read 7180 times)

yamaha6611 · « **on:** December 11, 2009, 05:18:59 PM »

so, see how the turbo is keyed??? didnt notice that. so i clocked it, and went to put the snap ring back on... the compressor housing didnt seat, and so i thought it was just a little tight from never being taken apart.. tapped it with a hammer lightly. well the little round keyway broke the damn metal somehow... you think it will be okay?? the rubber still is in tact and seals up, but that section is taken out.. ill try to do my best in paint hah

normal... keyway is highlighted...

and im trying to draw what i did!

i just drew the white over on the other piece to show how big it was, but its actually on the other side of the turbo where the arrow points... do you think it will be alright with that section missing???

Cooljnateman · « **Reply #1 on:** December 11, 2009, 05:48:23 PM »

your good

HiProfile · « **Reply #2 on:** December 11, 2009, 06:15:29 PM »

The first problem I see is the turbo size - too small

The real issue could be the pressure pushing the o-ring out to the snap ring. If you can use something like JB weld to reform the lip, or glue the chunk back in, it should keep the o-ring in place. Just make sure you use a dremel tool to grind that key out of the cover.

toyolla86 · « **Reply #3 on:** December 11, 2009, 07:06:25 PM »

dude i did the exact same thing to my 14b the other day. like a week ago. and i almost posted a thread about it too.
hahah.

anyways heres what i did.

i just put some high temp gasket sealer where the break occured and then continued on.

i think it will be fine. i was pissed when that stupid snap ring wouldnt go in so i started banging it.
then i finally took it apart to see what the hell was stopping it and i saw this.

not happy. i just bought this turbo a few weeks ago.

yamaha6611 · « **Reply #4 on:** December 13, 2009, 12:29:31 AM »

hahaha yeaaaa exactly what mine looks like!

and the turbo size, isnt too small!!! twin scroll 16g evo turbo, for a 2.0L, i think should be plenty... mabye not though, who knows...

yamaha6611 · « **Reply #5 on:** December 13, 2009, 06:29:28 PM »

hah yeaaa, seems we figured that out the hard way... stupid dsm shit.

danz · « **Reply #6 on:** December 13, 2009, 11:31:12 PM »

too small

Robb · « **Reply #7 on:** December 14, 2009, 12:25:48 AM »

Too small. My 16g on my bone stock LS spooled at 1200rpm and 17psi at 2200rpm on a log mani.

onlyflash944 · « **Reply #8 on:** December 14, 2009, 12:29:55 AM »

Quote from: n/a michael on December 13, 2009, 01:25:37 AM

dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

toyolla86 · « **Reply #9 on:** December 14, 2009, 12:33:55 AM »

dremel FTW

but actually after i broke it i didnt need to do any other modification cause it fits now. hahaaha.

Robb · « **Reply #10 on:** December 14, 2009, 12:34:24 AM »

Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM

Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

onlyflash944 · « **Reply #11 on:** December 14, 2009, 12:40:09 AM »

Quote from: Robb on December 14, 2009, 12:34:24 AM

Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM
Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

stopping by. my sister has business to take care of in asheville once a year so our family makes a trip to the biltmore for x-mas to go aloing with it. we get a hotel and my sister expenses it. i can't resist gettin my ride tuned by someone who knows what the fuck is going on because i have so much money in it right now. hopefully the damn cam gets here tomorrow, if not i guess its getting tuned with the stocker in it.

Robb · « **Reply #12 on:** December 14, 2009, 01:07:56 AM »

Quote from: onlyflash944 on December 14, 2009, 12:40:09 AM

Quote from: Robb on December 14, 2009, 12:34:24 AM
Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM
Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

stopping by. my sister has business to take care of in asheville once a year so our family makes a trip to the biltmore for x-mas to go aloing with it. we get a hotel and my sister expenses it. i can't resist gettin my ride tuned by someone who knows what the fuck is going on because i have so much money in it right now. hopefully the damn cam gets here tomorrow, if not i guess its getting tuned with the stocker in it.

You wont regret a JD tune. Im super busy this week so if I dont get to meet you dont loose sleep on it lol.

onlyflash944 · « **Reply #13 on:** December 14, 2009, 01:14:14 AM »

Quote from: Robb on December 14, 2009, 01:07:56 AM

Quote from: onlyflash944 on December 14, 2009, 12:40:09 AM
Quote from: Robb on December 14, 2009, 12:34:24 AM
Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM
Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

stopping by. my sister has business to take care of in asheville once a year so our family makes a trip to the biltmore for x-mas to go aloing with it. we get a hotel and my sister expenses it. i can't resist gettin my ride tuned by someone who knows what the fuck is going on because i have so much money in it right now. hopefully the damn cam gets here tomorrow, if not i guess its getting tuned with the stocker in it.

You wont regret a JD tune. Im super busy this week so if I dont get to meet you dont loose sleep on it lol.

its all good, you and your wife have a heart to heart about that 944 that i was telling you about in pulaski? guy still has it as of last friday

Robb · « **Reply #14 on:** December 14, 2009, 01:32:26 AM »

Quote from: onlyflash944 on December 14, 2009, 01:14:14 AM

Quote from: Robb on December 14, 2009, 01:07:56 AM
Quote from: onlyflash944 on December 14, 2009, 12:40:09 AM
Quote from: Robb on December 14, 2009, 12:34:24 AM
Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM
Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

stopping by. my sister has business to take care of in asheville once a year so our family makes a trip to the biltmore for x-mas to go aloing with it. we get a hotel and my sister expenses it. i can't resist gettin my ride tuned by someone who knows what the fuck is going on because i have so much money in it right now. hopefully the damn cam gets here tomorrow, if not i guess its getting tuned with the stocker in it.

You wont regret a JD tune. Im super busy this week so if I dont get to meet you dont loose sleep on it lol.

its all good, you and your wife have a heart to heart about that 944 that i was telling you about in pulaski? guy still has it as of last friday

Yeah that aint gonna happen lol. Somethin about being broke-ass and eating ramen noodles for dinner ha.

Realistically, I can hardly maintain the one I have, much less a second. Maybe when she gets her RN, but at that point ill want a Supra or something so meh. Thanks for letting me know about it though, I appreciate it.

onlyflash944 · « **Reply #15 on:** December 14, 2009, 01:33:03 AM »

Quote from: Robb on December 14, 2009, 01:32:26 AM

Quote from: onlyflash944 on December 14, 2009, 01:14:14 AM
Quote from: Robb on December 14, 2009, 01:07:56 AM
Quote from: onlyflash944 on December 14, 2009, 12:40:09 AM
Quote from: Robb on December 14, 2009, 12:34:24 AM
Quote from: onlyflash944 on December 14, 2009, 12:29:55 AM
Quote from: n/a michael on December 13, 2009, 01:25:37 AM
dumb ass
gotta drill that pin out so you can clock it anyway you want.

a drill is way to complicated. chisel and my favorite 5lb. persuader took care of that pin in no time flat

JD said your swinging by Wed. You just stopping in or you claiming the couch?

stopping by. my sister has business to take care of in asheville once a year so our family makes a trip to the biltmore for x-mas to go aloing with it. we get a hotel and my sister expenses it. i can't resist gettin my ride tuned by someone who knows what the fuck is going on because i have so much money in it right now. hopefully the damn cam gets here tomorrow, if not i guess its getting tuned with the stocker in it.

You wont regret a JD tune. Im super busy this week so if I dont get to meet you dont loose sleep on it lol.

its all good, you and your wife have a heart to heart about that 944 that i was telling you about in pulaski? guy still has it as of last friday

Yeah that aint gonna happen lol. Somethin about being broke-ass and eating ramen noodles for dinner ha.

i fuckin love ramen

Joseph Davis · « **Reply #16 on:** December 14, 2009, 03:19:50 AM »

Quote from: Cooljnateman on December 11, 2009, 05:48:23 PM

your good

While you are correct, it makes me nervous to see you handing out advice without a little more experience under your belt. Also, the OP is a faggot, and while Robb is basically paying all the bills since his wife quit her part time gig and picked up a bigger course load he very much does not eat Ramen. I'm the only one that brings that shit into the house.

Robb · « **Reply #17 on:** December 14, 2009, 09:52:49 AM »

Quote from: Joseph Davis on December 14, 2009, 03:19:50 AM

Quote from: Cooljnateman on December 11, 2009, 05:48:23 PM
your good

While you are correct, it makes me nervous to see you handing out advice without a little more experience under your belt. Also, the OP is a faggot, and while Robb is basically paying all the bills since his wife quit her part time gig and picked up a bigger course load he very much does not eat Ramen. I'm the only one that brings that shit into the house.

I eat it for lunch at work alot from those Styrofoam cup/bowls you get at the grocery store. I have a box of them under the toolbox. Add water and nuke.

Joseph Davis · « **Reply #18 on:** December 14, 2009, 10:39:11 AM »

Who we are at work is not who we are in real life, Robb.

Robb · « **Reply #19 on:** December 14, 2009, 10:44:48 AM »

We do not talk about fight club.

t_cel_t · « **Reply #20 on:** December 14, 2009, 12:39:36 PM »

quit buying turbos made with cast metal contaminated with wop grease

yamaha6611 · « **Reply #21 on:** December 15, 2009, 05:05:32 AM »

hah yea the turbo isnt the best, ive run into some problems... drain... way too tight for my -10an braided line and fittings, so now i need a 90... or mabye a 45 i dunno..

also, i had to notch the front crossmember to get the exhaust to fit, sucks but its getting re-welded back tomorrow with some nice steel plates!

pics and vids hopefully in the near future.

News:

Author Topic: im an idiot, see if what i did isnt toooo bad. (Read 7180 times)