Topic: Ceramic coating. (Read 7834 times)

notfastcrx · « **on:** December 24, 2009, 10:44:05 PM »

My dad and i have been into powdercoating for about 5 years now and we just took our first shot at ceramic coating. did a DP, and some other stuff for a wrx. stuff is good for 2000 degrees.i'll get more pics up soon.

prices are very low and turn around time will be about a week if anyone is interested.

88dx · « **Reply #1 on:** December 24, 2009, 10:58:37 PM »

That black looks pimp :yes:

ADSR · « **Reply #2 on:** December 24, 2009, 11:07:25 PM »

very nice! I always love the flat black look.

notfastcrx · « **Reply #3 on:** December 24, 2009, 11:22:06 PM »

wait till you see the mitsu turbo housing i did

BoostedSchemes · « **Reply #4 on:** December 24, 2009, 11:25:42 PM »

i want you to coat my entire turbo system for 50$

notfastcrx · « **Reply #5 on:** December 25, 2009, 12:02:48 AM »

mmmm, no

Quote from: BoostedSchemes on December 24, 2009, 11:25:42 PM

i want you to coat my entire turbo system for 50$

crxvtec91 · « **Reply #6 on:** December 25, 2009, 02:58:23 AM »

Hum I was thinking of doing this to the top of some pistons.

ochoa · « **Reply #7 on:** December 25, 2009, 03:04:07 AM »

BoostedSchemes · « **Reply #8 on:** December 25, 2009, 03:26:04 AM »

http://motherless.com/E6287E8

Joseph Davis · « **Reply #9 on:** December 25, 2009, 03:31:12 AM »

Quote from: BoostedSchemes on December 25, 2009, 03:26:04 AM

http://motherless.com/E6287E8

I love that dirty little whore.

BoostedSchemes · « **Reply #10 on:** December 25, 2009, 03:55:31 AM »

i know we do

crttaz · « **Reply #11 on:** December 25, 2009, 04:09:21 AM »

Quote from: Joseph Davis on December 25, 2009, 03:31:12 AM

Quote from: BoostedSchemes on December 25, 2009, 03:26:04 AM
http://motherless.com/E6287E8

I love that dirty little whore.

I loved her mother

notfastcrx · « **Reply #12 on:** December 25, 2009, 11:40:33 PM »

Here's the rest of the pictures. the guy insisted we do everything ceramic. whatever the customer wants i guess. enjoy.

and the money shot......

Cooljnateman · « **Reply #13 on:** December 25, 2009, 11:45:01 PM »

whats a typical price here for a manifold, lets say log manifold, and then a whole block 1.8, im not doing any of this jw

notfastcrx · « **Reply #14 on:** December 25, 2009, 11:46:42 PM »

if the block is completely disassembled, and clean. a couple hundred for both. not including shipping of course.

RotaryGeek · « **Reply #15 on:** December 25, 2009, 11:47:05 PM »

That turbo is front page material.

notfastcrx · « **Reply #16 on:** December 26, 2009, 08:59:07 PM »

I know you guys are getting your tax returns soon. a perfect time to get your shit ceramic/powder coated. pm me for pricing. :yes:

here's some more pics of what i can do. we can basically do any color (gloss, flat, or wrinkle)

black with silver lettering

red with silver lettering

semi gloss silver.

2.slow_Jetta · « **Reply #17 on:** December 26, 2009, 09:38:47 PM »

powder coating FTW my dad does this shit too he painted my rims black and they look 100x better then spray paint

PhilStubbs · « **Reply #18 on:** December 26, 2009, 09:45:27 PM »

i have been powercoating for years and have considered giving it a shot.

any chance you would tell me where you get it?

notfastcrx · « **Reply #19 on:** December 26, 2009, 09:52:39 PM »

we get our stuff from all over. columbiacoatings.com mainly

PhilStubbs · « **Reply #20 on:** December 26, 2009, 10:01:57 PM »

cool. i have gotten most of my stuff from eastwood.com

im not happy with their stuff, but they sell in small quantities pretty cheap and i dont do a whole lot at once and im still using a household oven. i will check them out

notfastcrx · « **Reply #21 on:** December 26, 2009, 10:06:15 PM »

yeah eastwood has good stuff but they take forever with shipping. i can usually have parts in and out within a few days. but if it takes them a week to get me the powder the customer is on hold, which sucks.

PhilStubbs · « **Reply #22 on:** December 26, 2009, 10:08:13 PM »

i have always gotten things in just a few days form them, but it seems like their powders arent consistant. i get varying results from their stuff, but i have used other powers with solid results

BoostedSchemes · « **Reply #23 on:** December 26, 2009, 11:18:54 PM »

the cost to color parts is more than the parts themselves

Joseph Davis · « **Reply #24 on:** December 26, 2009, 11:25:37 PM »

Quote from: Cooljnateman on December 25, 2009, 11:45:01 PM

a whole block

ATTENTION FAGGOTS

Powder coating, or paint, is a really good way to fuck up your electrical system if you don't THINK about it. I'd consider doing it for a really clean setup you garage most of the time, but you need to ground the alternator housing to a ground bar, and use it as your main ground point for starter, thermostat (ECU) ground, chassis ground, etc.

BoostedSchemes · « **Reply #25 on:** December 26, 2009, 11:39:04 PM »

Quote from: Joseph Davis on December 26, 2009, 11:25:37 PM

Quote from: Cooljnateman on December 25, 2009, 11:45:01 PM
a whole block

ATTENTION FAGGOTS

Powder coating, or paint, is a really good way to fuck up your electrical system if you don't THINK about it. I'd consider doing it for a really clean setup you garage most of the time, but you need to ground the alternator housing to a ground bar, and use it as your main ground point for starter, thermostat (ECU) ground, chassis ground, etc.

wat color do u reccomend powder coating the ground bar and how much does it cost

Joseph Davis · « **Reply #26 on:** December 26, 2009, 11:40:54 PM »

Quote from: BoostedSchemes on December 26, 2009, 11:39:04 PM

Quote from: Joseph Davis on December 26, 2009, 11:25:37 PM
Quote from: Cooljnateman on December 25, 2009, 11:45:01 PM
a whole block

ATTENTION FAGGOTS

Powder coating, or paint, is a really good way to fuck up your electrical system if you don't THINK about it. I'd consider doing it for a really clean setup you garage most of the time, but you need to ground the alternator housing to a ground bar, and use it as your main ground point for starter, thermostat (ECU) ground, chassis ground, etc.

wat color do u reccomend powder coating the ground bar and how much does it cost

I need pics of your ground bar before I can say. *wink*

BoostedSchemes · « **Reply #27 on:** December 26, 2009, 11:43:06 PM »

i dont think my car has a ground right now i was gonna buy one but i wanna diy hmt and buy just the bar and then custom powder coat it like nate and then instal to the starter and alternator on the engine

Doug · « **Reply #28 on:** December 27, 2009, 12:32:55 AM »

Shouldn't this be in the classifieds? This is just a for sale thread.

notfastcrx · « **Reply #29 on:** December 27, 2009, 02:04:03 AM »

Quote from: Doug on December 27, 2009, 12:32:55 AM

Shouldn't this be in the classifieds? This is just a for sale thread.

yeah i suppose it is. i just wanted to share my work but then i figure i'd see if there was a market for it on here. this is rhmt after all so i guess not

we're all broke ass nigerians.

News:

Author Topic: Ceramic coating. (Read 7834 times)