:::RHMT::: Real Home Made Turbo
General Category => Forced Induction => Topic started by: fearsomedan on March 25, 2009, 05:42:42 PM
-
I'm doing a budget rhmt kit on a 92 paseo. I will post pics as I progress. This is my daily driver so it must remain drivable as much as possible. Boost first, maybe home painted rustoleum paint or cheap body shop paint job, some nice aluminum wheels and that will be all. No body kits or audio ice.
92 paseo 161,000 miles. $Free
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1237584693985.jpg&hash=fe5e934ae428eb394b03fa6e0a16a3f06ddb6e3f)
Stock 5efe engine. Air filter $Free
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1237584737710.jpg&hash=37aee3f3f0a4f80d4cb7c52b8e301cf243cecd4c)
Interior is pretty clean
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1237584710760.jpg&hash=32157574df500397058c906c909593aa251078a3)
Greddy emanage ultimate with injection and ignition harness. $200
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238015986176.jpg&hash=12370617f4f86519811769dd6d6decae79f9912f)
I will be making my own plug and play harness for the emanage. I hope to get close to 200hp at the wheels. I hope to retain power steering and ac.
Genuwine blitz nur spec fart can. 2 1/2in. inlet 4 inch tip. $40.00
extension pipe. $7.48
I welded it on myself.
I will be running 3 inch exhaust when I get the turbo on so I figure i can cut the inlet off, drill the opening out to 3 inch and insert the pipe.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F12380194371871.jpg&hash=01443d0b02c5a7d90c8fc05171241c8f6ec5d8dc)
-
I've heard rumors that you can make one of these a screamer, but that's all they seem to be are rumors.
-
I'm not looking to make it a 10 second car. It's just my daily that needs some kick in the pants with as little money as possible.
-
ya they scream...untill u shoot a rod out the side of the block. a 4age is a good swap from a 90 91 gts ae92. im boosting a small port right now in my ae86.
-
PASEOOOOOOOOOOOOOO, i remember flipping a car like this
-
ha.. another toyota head...
i had a 95 el53 as most of you know.
shit never blew with a 80shot
shit never blew with a 14b either..
at least you have somewhat good management. those things have so much fuckin room under the hood, its not even funny...
a throwback ricer pic
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi40.photobucket.com%2Falbums%2Fe250%2FJayNLorimel%2Fths_20.jpg&hash=7abdaaf84bd568ca262cf982f1ac695b3d61ea8d)
-
I know the rods are week. I hope not to blow it but if I do, another cheap 5e can be had at my local upull for 250.
-
i got a set of 5EFHE rods, stronger then EFE rods and are stock replacement. only thing is one of them is slightly bent ;)
$20 shipped
comes with free dis 5efe pistons, they have cracked ringlands
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi30.photobucket.com%2Falbums%2Fc304%2Fagent_jwa%2FIMG_18532.jpg&hash=c9b4f62ac066328f6b3f869cef5ae7cce90b5e65)
-
i got a set of 5EFHE rods, stronger then EFE rods and are stock replacement. only thing is one of them is slightly bent ;)
$20 shipped
If I had another motor that I was buliding, I would be all over that great deal like white on rice
-
how close to the border are u? pick a part has 100 dollar engines right now
http://www.pickapart.ca/ (http://www.pickapart.ca/)
-
I'm about the farthest away from the border you can be. I live in south florida.
-
4x100 bolt pattern?
i'm pickin up a couple sets of bmw 2002 and E30 wheels tomorrow
-
4x100 bolt pattern?
yes
-
4efte, they are like 300 bux for an oem turbo motor
-
why do this to your dd. I mean my car is a DD but I also had my gf drive me around. Unless u got another car to drive. I wouldnt do it. But other than that this is a sweet build. :noel:
-
I can't just drive around in a naturally aspirated vehicle. Now don't get me wrong, I'm not going to be racing from stop light to stop light every chance I get either. It's just a mental imbalance that I have.
-
4efte, they are like 300 bux for an oem turbo motor
If I got to pull this motor, It would be for something like a 5e block with 5efhe rods and 4efte pistons. A cheap throw together, but I don't intend to blow this motor anytime soon and also, I wouldn't feel right swapping for an engine of lesser displacement.
-
Go go Paseo!
-
I went to the u pull today. I picked up the ecu connectors and an ecu for $30.00
I then took the ecu apart, cut the connector out of that and this is what I'll be using to make the plug and play harness. All I need is some heat shrink and time to solder.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238117448387.jpg&hash=2550bbfb9a5ce2d8c275e7c46fb740f00a25c6a3)
-
Looking good.... fucking DEAL on the emanage !!!
forget the 4EFTE ... gaysauce.... just make a gangster log mani and get a Volvo T3 ... call it a day.
-
forget the 4EFTE ... gaysauce.... just make a gangster log mani and get a Volvo T3 ... call it a day.
Agreed
-
I made the plug and play harness and it works.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238451436783.jpg&hash=abadc9984a52b833809daea04a03956b2f776b78)
Here it is with the emanage harnesses attached. I'll find out if it is wired right within the next few days.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238467220807.jpg&hash=017a729509c13b430ed49429d46dbf6f92437e78)
-
This is sweet, if there was no hondas I would fuck with some toyota action... :yes:
-
nice harness
-
excellent harness
-
sweet harness! looks like a fun little project
what are you using for a clutch in this beast?
-
what are you using for a clutch in this beast?
I haven't bought the clutch yet. It will most likely be an ebay one.
-
Awesome harness.
Have you got the turbo for it yet?
-
that harness is some good work. Most people aren't willing to do shit like that.
-
I have a running 4AGE. make offer Can get a vid if you need.
in Columbus, GA area
-
alot of work for gay output
-
I don't think there are many performance parts for that engine available
-
Awesome harness.
Have you got the turbo for it yet?
Not yet. The chinese t380 is still available. I might take it and at the very least, I can have another cdm turbo failure thread.
I have a running 4AGE. make offer Can get a vid if you need.
in Columbus, GA area
It's just my daily driver so I'm not getting too crazy with it.
alot of work for gay output
I was planning on just an afc hack and injectors, but I got a great deal on the emanage.
I don't think there are many performance parts for that engine available
I haven't bothered to try to find any. The turbo will be the only performance add on that I will do to it.
-
I don't think there are many performance parts for that engine available
Theres not much, and what there is, is expensive.
At least he got to start with the 16v .... I used the 3E 12 valve :-X
-
alot of work for gay output
Kinda like working to buy a manifold off you. :somb:
He doesn't even have $500 into the complete deal, give him a break.
-
Well it runs. The first try I had no rpm signal. I went ahead and picked up a wiring diagram from my job and found that the pin out for the ecu was different than the one I was using that I found online. The one online and from the greddy instalation manual was close except for 2 wires which I had to switch over. The car started on the first try and it ran pretty decent. I wanted to post up the maps, but I did not know how. I still need to get a wideband when money allows me to. I think I will gather the turbo items and make the manifold first.
-
I picked up the turbo. I'm taking a risk on a cdm piece. I kept checking my local craigslist, but all the turbos were too big or too much for what I wanted. They call it a t380.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238864903535.jpg&hash=3cf32e01ed6ce240841a118036a718e076733804)
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1238864923442.jpg&hash=4925d1f261fb5c62efb4d86fafdf36397d3cce6f)
-
Fluxcored mani is done. I picked up a stock manifold from u pull, hacked off the flange and used piping from an old set of headers from my monte before I went turbo with it.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1239747357274.jpg&hash=2bc96efbad3de6f99991a2357f7f36908f681274)
Test fit. I will probably go with a civic half radiator. If not, I will put some kind of shielding on this radiator.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1239744290821.jpg&hash=d8550e5e6d96ed71ef4a90d0de3165b73db282b8)
Another angle
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1239744315233-1.jpg&hash=a34d1f4fcc628094302b956a23834f57375b1fd3)
-
sweet build and topmount none teh less. O0
-
Looks good so far.
-
Good progress. Do you drive your monte very often?
-
Badass. Need more pics though.
-
Good progress. Do you drive your monte very often?
Not lately. Since I got it painted I just haven't felt like taking it out much.
-
Badass. Need more pics though.
The car is still stock, but I'll post pics as I progress with the kit.
-
I picked up a civic half radiator. It went on with the stock radiator hoses.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2Funtitled.jpg&hash=1e5df2600b78eb699632a6f546f25f8ff575bb33)
-
That is bad ass I'm thinking picking one of these up and doing 4age 20v Blacktop conversion and seeing that the civic half rad. fits like that could come in handy for future reference. ;D
-
my 92 paseo is a fast as it come soon to be bored 5efe 50 shot nos and some bolt ons all on this already prestine car
-
my 92 paseo is a fast as it come soon to be bored 5efe 50 shot nos and some bolt ons all on this already prestine car
LOL yeah right
-
hey watch you mouth there civic boy the car is a icon
-
The only paseo in wyoming that rides 1 in of the ground. ;D :somb:
-
soon my freind the crx will be home and the paseo will be back in the parking mode again wwwwwoooooooooooo :noel:
-
ne way thats a 4 inch drop by no means slamed
-
as we all can tell this guy hasnt got enough cash for a honda so he must use what he has my paseo is so sexy and fast im scared to drive it when i hit the gas she bounces off the road from power :noel:
-
Intercooler.
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1240168275058.jpg&hash=6fbb0fd017770d8049603558133e3a50b0b62e83)
Intercooler installed
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2Funtitled-1.jpg&hash=80be3a535359fd5d1f735a32a73ec5e71d419373)
oil feed and drain flange
(https://realhomemadeturbo.com/forum/proxy.php?request=http%3A%2F%2Fi138.photobucket.com%2Falbums%2Fq266%2Ffearsomedan%2F1.jpg&hash=d2343680ddd24df9c983cdd64607850bf3b7239f)
-
Great work, ive always wanted to see how one of these would handle mods. Although i am a little concerned about your manifold holding up to heat and weight on it. Did you brace it at all?
-
I think the manifold will be fine, its pretty close to the head.
Good to see one of this build, i have been thinking of turbocharging my corolla
-
little concerned about your manifold holding up to heat and weight on it. Did you brace it at all?
I am planning to brace it when it's ready to be bolted in for the last time.
-
i got the complete 1992 paseo runs and everything herer if you wanna buy it
-
nice little sleeper