Topic: Economy sucks 92 paseo build (Read 18782 times)

fearsomedan · « **on:** March 25, 2009, 05:42:42 PM »

I'm doing a budget rhmt kit on a 92 paseo. I will post pics as I progress. This is my daily driver so it must remain drivable as much as possible. Boost first, maybe home painted rustoleum paint or cheap body shop paint job, some nice aluminum wheels and that will be all. No body kits or audio ice.

92 paseo 161,000 miles. $Free

Stock 5efe engine. Air filter $Free

Interior is pretty clean

Greddy emanage ultimate with injection and ignition harness. $200

I will be making my own plug and play harness for the emanage. I hope to get close to 200hp at the wheels. I hope to retain power steering and ac.

Genuwine blitz nur spec fart can. 2 1/2in. inlet 4 inch tip. $40.00
extension pipe. $7.48
I welded it on myself.
I will be running 3 inch exhaust when I get the turbo on so I figure i can cut the inlet off, drill the opening out to 3 inch and insert the pipe.

Dweezil · « **Reply #1 on:** March 25, 2009, 05:45:15 PM »

I've heard rumors that you can make one of these a screamer, but that's all they seem to be are rumors.

fearsomedan · « **Reply #2 on:** March 25, 2009, 05:50:27 PM »

I'm not looking to make it a 10 second car. It's just my daily that needs some kick in the pants with as little money as possible.

RobC · « **Reply #3 on:** March 25, 2009, 06:22:11 PM »

ya they scream...untill u shoot a rod out the side of the block. a 4age is a good swap from a 90 91 gts ae92. im boosting a small port right now in my ae86.

g_shok · « **Reply #4 on:** March 25, 2009, 06:25:36 PM »

PASEOOOOOOOOOOOOOO, i remember flipping a car like this

ApexSilver06MR · « **Reply #5 on:** March 25, 2009, 06:27:32 PM »

ha.. another toyota head...

i had a 95 el53 as most of you know.

shit never blew with a 80shot

shit never blew with a 14b either..

at least you have somewhat good management. those things have so much fuckin room under the hood, its not even funny...

a throwback ricer pic

fearsomedan · « **Reply #6 on:** March 25, 2009, 06:33:29 PM »

I know the rods are week. I hope not to blow it but if I do, another cheap 5e can be had at my local upull for 250.

t_cel_t · « **Reply #7 on:** March 25, 2009, 07:31:24 PM »

i got a set of 5EFHE rods, stronger then EFE rods and are stock replacement. only thing is one of them is slightly bent

$20 shipped
comes with free dis 5efe pistons, they have cracked ringlands

fearsomedan · « **Reply #8 on:** March 25, 2009, 07:52:31 PM »

Quote from: t_cel_t on March 25, 2009, 07:31:24 PM

i got a set of 5EFHE rods, stronger then EFE rods and are stock replacement. only thing is one of them is slightly bent
$20 shipped

If I had another motor that I was buliding, I would be all over that great deal like white on rice

RobC · « **Reply #9 on:** March 25, 2009, 10:38:55 PM »

how close to the border are u? pick a part has 100 dollar engines right now

http://www.pickapart.ca/

fearsomedan · « **Reply #10 on:** March 25, 2009, 11:17:09 PM »

I'm about the farthest away from the border you can be. I live in south florida.

onlyflash944 · « **Reply #11 on:** March 25, 2009, 11:27:07 PM »

4x100 bolt pattern?

i'm pickin up a couple sets of bmw 2002 and E30 wheels tomorrow

fearsomedan · « **Reply #12 on:** March 25, 2009, 11:28:30 PM »

Quote from: onlyflash944 on March 25, 2009, 11:27:07 PM

4x100 bolt pattern?

yes

TTC · « **Reply #13 on:** March 26, 2009, 09:24:00 AM »

4efte, they are like 300 bux for an oem turbo motor

birdley42008 · « **Reply #14 on:** March 26, 2009, 09:33:54 AM »

why do this to your dd. I mean my car is a DD but I also had my gf drive me around. Unless u got another car to drive. I wouldnt do it. But other than that this is a sweet build.

fearsomedan · « **Reply #15 on:** March 26, 2009, 04:09:36 PM »

I can't just drive around in a naturally aspirated vehicle. Now don't get me wrong, I'm not going to be racing from stop light to stop light every chance I get either. It's just a mental imbalance that I have.

fearsomedan · « **Reply #16 on:** March 26, 2009, 04:12:36 PM »

Quote from: TTC on March 26, 2009, 09:24:00 AM

4efte, they are like 300 bux for an oem turbo motor

If I got to pull this motor, It would be for something like a 5e block with 5efhe rods and 4efte pistons. A cheap throw together, but I don't intend to blow this motor anytime soon and also, I wouldn't feel right swapping for an engine of lesser displacement.

patsmx5 · « **Reply #17 on:** March 26, 2009, 07:52:05 PM »

Go go Paseo!

fearsomedan · « **Reply #18 on:** March 26, 2009, 09:38:50 PM »

I went to the u pull today. I picked up the ecu connectors and an ecu for $30.00
I then took the ecu apart, cut the connector out of that and this is what I'll be using to make the plug and play harness. All I need is some heat shrink and time to solder.

AstroVannin · « **Reply #19 on:** March 27, 2009, 04:31:08 PM »

Looking good.... fucking DEAL on the emanage !!!

forget the 4EFTE ... gaysauce.... just make a gangster log mani and get a Volvo T3 ... call it a day.

fearsomedan · « **Reply #20 on:** March 27, 2009, 08:25:27 PM »

Quote from: AstroVannin on March 27, 2009, 04:31:08 PM

forget the 4EFTE ... gaysauce.... just make a gangster log mani and get a Volvo T3 ... call it a day.

Agreed

fearsomedan · « **Reply #21 on:** March 30, 2009, 10:48:22 PM »

I made the plug and play harness and it works.

Here it is with the emanage harnesses attached. I'll find out if it is wired right within the next few days.

Towdogg · « **Reply #22 on:** March 30, 2009, 11:11:18 PM »

This is sweet, if there was no hondas I would fuck with some toyota action... :yes:

danz · « **Reply #23 on:** March 31, 2009, 02:47:10 AM »

nice harness

Urban Indian · « **Reply #24 on:** March 31, 2009, 02:47:11 PM »

excellent harness

ryan89crx · « **Reply #25 on:** March 31, 2009, 05:14:20 PM »

sweet harness! looks like a fun little project

what are you using for a clutch in this beast?

fearsomedan · « **Reply #26 on:** March 31, 2009, 07:49:48 PM »

Quote from: ryan89crx on March 31, 2009, 05:14:20 PM

what are you using for a clutch in this beast?

I haven't bought the clutch yet. It will most likely be an ebay one.

AstroVannin · « **Reply #27 on:** March 31, 2009, 08:36:33 PM »

Awesome harness.

Have you got the turbo for it yet?

thehatchninja · « **Reply #28 on:** March 31, 2009, 08:54:03 PM »

that harness is some good work. Most people aren't willing to do shit like that.

Conceptz-X · « **Reply #29 on:** March 31, 2009, 09:15:04 PM »

I have a running 4AGE. make offer Can get a vid if you need.

in Columbus, GA area

News:

Author Topic: Economy sucks 92 paseo build (Read 18782 times)

birdley42008