Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

TURBOS SLUTS LIQOUR FLUXCORE AND RACEGAS

HATCHBOYS WIFES CUNT IS GOING TO BE A MILE WIDE BY THE TIME WE GET DONE WITH HER WHILST HES GONE

Fuck your mom

Whats this all Aboot???

FUCK CANADA

Urban Indians Cousin gets gang banged by the dirtiest of HMT nigs

BLANKET PARTY RICKY P AND BRING HIS ASS FOR A NW STOOD STOMPING BY THE CREATOR AND CLAN

[bigdaddyvtec]

I have money that says there wont be ONE HMT V8 making more than 450WHP

Johnny I bet you I make at least 1.5 x what the SBC musters, with half as many plug wires and just as few cylinders 

think you're trans will still go into 4th gear at the end of may. better not drive it

It always goes into gear... The question is will there be any gear left???   If not it will definately have another tranny in it.. It WILL be there.

[random-strike]

I have money that says there wont be ONE HMT V8 making more than 450WHP

Johnny I bet you I make at least 1.5 x what the SBC musters, with half as many plug wires and just as few cylinders 

think you're trans will still go into 4th gear at the end of may. better not drive it

It always goes into gear... The question is will there be any gear left???   If not it will definately have another tranny in it.. It WILL be there.

lol 

i can fill my truck with trans for you and bring them just in case

[ratcityrex]

If not it will definately have another tranny in it.. It WILL be there.

Throw it in the trunk and bring that shit along

[Urban Indian]

If not it will definately have another tranny in it.. It WILL be there.

Throw it in the trunk and bring that shit along

I am bringing my spare SIR tranny and some fucking cash incase I need to buy another.




Question is...... Will i be up north working at this time? 

[random-strike]

hey thats a good idea, what trans are you using i'll bring a couple and sell them to you when yours blows

[ratcityrex]

Question is...... Will i be up north working at this time? 

You better not be working you fucking wagon burner

[Kenny Rogers]

Question is...... Will i be up north working at this time? 

Working some dude's pole maybe.  I'll tell you what, you make the trip down I will buy you some more OC... and you can suck my dick (so you don't get home sick) 

[bigdaddyvtec]

If not it will definately have another tranny in it.. It WILL be there.

Throw it in the trunk and bring that shit along

 I wont need it.

Besides, I live in Seattle

[bigdaddyvtec]

hey thats a good idea, what trans are you using i'll bring a couple and sell them to you when yours blows

Already have a backup.... 

The PPGs will be under way in a mateer of weeks, and in my car (as well as a few other LOCAL guys -Mitch,BOb and DRQPQUT are 3 of them)  by mid July.. and the Saenz will live till then, after that theyll be sold off. Ill be taking it a bit easier on the car till I get the PPGs. Once theyre in, Im going straight to the track and going to try to run it at the PINKS all out thing to see if a 10 second four doorAccord on Hubcaps interests them.

 We actually got enough people in on the PPG deal (and all of them local) to get them for a really fair deal. Add to that that Bullhead is local too, and its really nice for support should manage to break them. Im very impressed with the product, its durability and how they are taking care of the T1 issue. They WONT be mass producing them however, only the ones we ordered will be built... They will support any parts needs though (from what Ive seen I HIGHLY doubt even I will break them). Theyve been very cool, Eric has been in constant touch, and now that the H dog sets are done, we are next.

 :yes:

I noiw have all the Saenz updated shit, and 1 2 and 5 check out fine, as does the newer three... Tranny feels good.  Its even quieter, as we reallly took some time to get the teeth to line up well.

[1Fast68]

Once theyre in, Im going straight to the track and going to try to run it at the PINKS all out thing to see if a 10 second four doorAccord on Hubcaps interests them.

Registration is tonight at 7pm on pacifics website, better be on right at 7 trying to register or you'll never make it. They take the first 464 cars and it usually sells out and crashes the site in under 5 minutes.

Also, your shits gotta be legal or they won't let you run in the show, liability/insurance reasons i'm sure are the culprit.

[bigdaddyvtec]

Once theyre in, Im going straight to the track and going to try to run it at the PINKS all out thing to see if a 10 second four doorAccord on Hubcaps interests them.

Registration is tonight at 7pm on pacifics website, better be on right at 7 trying to register or you'll never make it. They take the first 464 cars and it usually sells out and crashes the site in under 5 minutes.

Also, your shits gotta be legal or they won't let you run in the show, liability/insurance reasons i'm sure are the culprit.

Fuck been trying for 5 minutes site is fucked

Ross wants to do it in his ride as well

[ratcityrex]

Did you guys get in on the stinky pinky action? It would be tits if you guys made it in.

[bigdaddyvtec]

Both Ros and I tried... Fuckin site was crippppled, and to no avail...I would have actually tried to bet my pile of shit to get in had we got through

[Random Hero]

Kenny Rogers if u have a k I really really hope u make more then 180. Every k I've dynoed in stock form with kpro has been 200+ .... or with an rbc and r cams 230+

[Kenny Rogers]

Kenny Rogers if u have a k I really really hope u make more then 180. Every k I've dynoed in stock form with kpro has been 200+ .... or with an rbc and r cams 230+

That's the problem... no k-pro for the k20z3 or any type of fully functional unit that can control fuel/timing/vtec/cam angle, etc.  It's the redheaded step-child of the k family at this point.  It does have the rbc intake manifold stock thorugh. 

You can buy a rsx ecu w/kpro and basically 'shotgun' the ecus... running two ecus.  I am not going to drop that kind of cash when I still have to pay off the car.

[ratcityrex]

K-series love teh cauck!

[Kenny Rogers]

K-series love teh cauck!

So does your mom 

Honestly, I don't even care about dyno'ing my own car because I know the kind of gay numbers it'll put down.  185 / 139 seems about the norm 

[chevy]

hopefully me and dave can do some street tuning before hand... that way i dont eat up so much dyno time  :somb:

[bigdaddyvtec]

I talked to Jeff for a moment today and he pointed out that the 23rd is indeed the labor day holiday... SO we are changing the date to May 30th... The next weekend.

I hope that doesnt fuck with anyones availability, and hope that it allowws more people to come... Just post up if we need to add or delete names, but it is definative. It will be Saturday the 30th of May....


Date changed, and Post modified


Suck my nuts

[bigdaddyvtec]

Please confirm the 30th works for you you lazy bastards   :somb:

[88dx]

hey Fat fingers what day is it? U have the 30th in one post and the 31st in the other  :somb:

[bigdaddyvtec]

Fuck. Fixed.

LOL

Good seeing you at HT nignog.  :yes:

[bigdaddyvtec]

Broke my M2Y4 case that has the Straights in it Saturday after the HT meet. ... Where the countershadft pinion is on the bellhousing side. Cracked the case 3/4 the way around the bearing....




Had to pull it out and take a look see... Pulled some shimming out of it and realigned the gears a tad to get the pinion off of the end of the case...  Well see what happens tomorrow.


 Well shit, at least the gears are good to go  ... This case has been raped on for a LONG time and been built 5 times. Got a M2F4 for 200 bux. Sold the gearset to dropout and put the tranny back together yet again last night...   #12. Going in the car tonight and Leed will be here tomorrow. I have 10 Gallons of Trick slut 114 sitting in the garage.




And tomorrow off

 

[ratcityrex]

the 30th will work for me.

Tomorrow should be a great day for tuning. It looks like its gona be around 68* and sunny
Im so suprised that you havent stripped the block out from unbolting and rebolting the trans on so many damn times

[Random Hero]

the 30th will work for me.

Tomorrow should be a great day for tuning. It looks like its gona be around 68* and sunny
Im so suprised that you havent stripped the block out from unbolting and rebolting the trans on so many damn times

He has :-P  Thread certs FTMFW

[bigdaddyvtec]

Mid shaft has been time-certed, and one block hole has been helicoiled...


Truth be told I have another one that needs to be done as well. Goingf to try to get Mike Dope to come up and hook it up.

[1Fast68]

Pacific Raceways Schedule:
May 30     Sat      Bracket Race #5

This means I won't be able to make it, Take me off the list tubby.

[chevy]

im still down  :somb:

[bigdaddyvtec]

Mid shaft has been time-certed, and one block hole has been helicoiled...


Truth be told I have another one that needs to be done as well. Goingf to try to get Mike Dope to come up and hook it up.

Tranny is in. Helicoiled the bad hole. Car is on the ground, together with race gas oil plugs and laptop in it waiting for Leed tomorrow.


Ill post numbers and pics laterin the HP thread if nothing breaks... Hoping for around 700

Pacific Raceways Schedule:
May 30     Sat      Bracket Race #5

This means I won't be able to make it, Take me off the list tubby.

Done

[j.h.christ]

Mid shaft has been time-certed, and one block hole has been helicoiled...


Truth be told I have another one that needs to be done as well. Goingf to try to get Mike Dope to come up and hook it up.

Tranny is in. Helicoiled the bad hole. Car is on the ground, together with race gas oil plugs and laptop in it waiting for Leed tomorrow.


Ill post numbers and pics laterin the HP thread if nothing breaks... Hoping for around 700

Pacific Raceways Schedule:
May 30     Sat      Bracket Race #5

This means I won't be able to make it, Take me off the list tubby.

Done

are you tooning it today, fat man? i would like to watch, but the fucking gf's birthday is today. where are you dynoing at, perhaps she needs that sweet cherry smell of race gas for a present.