Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 224363 times)

DRQPQUT · « **Reply #330 on:** April 03, 2010, 05:47:53 PM »

t-3 collector

started the car last night will post pics of finished product 2 morrow

DRQPQUT · « **Reply #331 on:** April 03, 2010, 06:49:18 PM »

finished product nigs

88dx · « **Reply #332 on:** April 03, 2010, 07:16:30 PM »

Id rub one off in that engine bay

Looks good justin cant wait to see it at the dyno meet :yes:

runsfromdacops · « **Reply #333 on:** April 03, 2010, 08:50:36 PM »

good luck gettting it tuned.. i called dave like 37 times and still no tune for me

ScorpioMk · « **Reply #334 on:** April 03, 2010, 09:13:28 PM »

God hates dirty people with clown cars LOL

flat_black · « **Reply #335 on:** April 04, 2010, 07:09:13 PM »

whens you going to get it tuned? gonna make 600?

bigdaddyvtec · « **Reply #336 on:** April 04, 2010, 09:22:06 PM »

Cars done... Looks VERY nice, HAve a wastegate issue to figure out (precisions guidelineds for the colors is wrong) and he broke a weel nstud, but the setup is tits. I took some really nice pics opf it but dont feel like posting them, maybe justin will.

Random Hero · « **Reply #337 on:** April 04, 2010, 10:06:45 PM »

lol.. if you torq your wheels studs this doesn't happen justin

Good to here its fiiinnnaaallly back on the road!

bigdaddyvtec · « **Reply #338 on:** April 04, 2010, 10:10:29 PM »

it wasnt about tq
the wheels were wrong, never been ran, and it fucked up the studs

bigdaddyvtec · « **Reply #339 on:** April 04, 2010, 11:35:45 PM »

PICS::

New catch can

So upgrades included
new S cover,
82 turbine housing,
new manifold
46mm Precision wastegate
-6AN fuel setup
new Downpipe

90turboteg · « **Reply #340 on:** April 05, 2010, 01:13:22 AM »

shit looks badass, cant wait to see some new numbers. i plan on running my drain from my catchcan the same way. now get it tuned and post some ripper vids nogle

bigdaddyvtec · « **Reply #341 on:** April 05, 2010, 01:33:01 AM »

Quote from: 90turboteg on April 05, 2010, 01:13:22 AM

shit looks badass, cant wait to see some new numbers. i plan on running my drain from my catchcan the same way. now get it tuned and post some ripper vids nogle

Ya ive got more than a few to see why returning to the front of the pan is much more prefferable tahn the rear, it only makes sense.

ratcityrex · « **Reply #342 on:** April 05, 2010, 10:54:47 AM »

Quote from: bigdaddyvtec on April 05, 2010, 01:33:01 AM

Quote from: 90turboteg on April 05, 2010, 01:13:22 AM
shit looks badass, cant wait to see some new numbers. i plan on running my drain from my catchcan the same way. now get it tuned and post some ripper vids nogle

Ya ive got more than a few to see why returning to the front of the pan is much more prefferable tahn the rear, it only makes sense.

TRUTH!

Shit looks hawt mang! Bet that shits gona sound good!

bigdaddyvtec · « **Reply #343 on:** April 05, 2010, 12:31:03 PM »

It had a seemingly really odd boost creep issue, we have 14 is osi worth of springs in it, but it went straight to the 25 PSI boost cut.... The EBC isnt installed yet, and it seemed odd, but the precision WGs have 2 bottom ports, so if youre using one for the reference to the compressor for boost, you have to plug the other one. We missed that yesterday, He just needs to plug the other hole up and its good to go.

Still on the old crome tune... Need to put the pwm shit in the ECU then plumb the MAC solenoid.... Shit will be good to go after that.

flat_black · « **Reply #344 on:** April 05, 2010, 07:26:01 PM »

I have the PWM shit

bigdaddyvtec · « **Reply #345 on:** April 05, 2010, 07:27:47 PM »

HE GOT IT TOO, JUST WANTED TO GET THE CARHOME... ITS STILL ON CROME. FIGUIRED ONCE DAVE WAS GOING TO BE DOWN HERE DEFINATELY WED DO IT THE NIGHT BEFORE.

flat_black · « **Reply #346 on:** April 07, 2010, 07:14:03 PM »

Quote from: bigdaddyvtec on April 05, 2010, 07:27:47 PM

HE GOT IT TOO, JUST WANTED TO GET THE CARHOME... ITS STILL ON CROME. FIGUIRED ONCE DAVE WAS GOING TO BE DOWN HERE DEFINATELY WED DO IT THE NIGHT BEFORE.

Caps lock / English fail

bigdaddyvtec · « **Reply #347 on:** April 07, 2010, 07:20:59 PM »

Both my English and grammar is better than your cocklicking, Its my large sized man hands and full figured fingers accompanied by not giving a fuck that you are actually attempting to flame, flamer.

Go build something fast and shut the fuck up.

The bottom of the Precision wastegates have two ports, one needs to be plugged (like your asshole Mitch)... We just needed to put the plug in for the second reference port and its alll gravyyy.

narfdanarf · « **Reply #348 on:** April 07, 2010, 07:34:45 PM »

I worked on a friends rx7 once and I noticed he did not have any lines going to his wastegate. Curious as fuck I asked him what the fuck caused his brain damage that made him think that was ok. Well apparently his car just happened to have the correct backpressure (14lbs IE 1:1 ratio) to lift his wastegate spring at 14lbs turbo discharge pressure, and he left it that way because he didn't have to run any lines to the w/g and 14lbs is all he wanted.

malichite · « **Reply #349 on:** April 07, 2010, 08:15:44 PM »

Quote from: ratcityrex on April 05, 2010, 10:54:47 AM

Quote from: bigdaddyvtec on April 05, 2010, 01:33:01 AM
Quote from: 90turboteg on April 05, 2010, 01:13:22 AM
shit looks badass, cant wait to see some new numbers. i plan on running my drain from my catchcan the same way. now get it tuned and post some ripper vids nogle

Ya ive got more than a few to see why returning to the front of the pan is much more prefferable tahn the rear, it only makes sense.

TRUTH!

Shit looks hawt mang! Bet that shits gona sound good!

Same way I will be running mine.

flat_black · « **Reply #350 on:** April 07, 2010, 08:40:03 PM »

Quote from: bigdaddyvtec on April 07, 2010, 07:20:59 PM

Both my English and grammar is better than your cocklicking, Its my large sized man hands and full figured fingers accompanied by not giving a fuck that you are actually attempting to flame, flamer. ARE

Go build something fast and shut the fuck up.

The bottom of the Precision wastegates have two ports, one needs to be plugged (like your asshole Mitch)... We just needed to put the plug in for the second reference port and its alll gravyyy.

Maybe if you took the Fork out of your mouth you wouldnt have FAT hands, FAT hands are not the same as MAN hands dummy. Im not flaming you, just simply calling you out on all the bullshit you dish out to everyone else, including me...

And remember, The popup head light girl car laid the dick down on that "family fun jap sedan" of yours as well so GFYS

bigdaddyvtec · « **Reply #351 on:** April 07, 2010, 08:44:36 PM »

I remember you getting around me as many times as i can count on on ofmy fat hands... which in contrast to how many times ive walked it uot on not only your car, but your homocycle too, doesnt even compare. You have alot of catching up to do, see what i did there?

Wold you like to try right now... again?? I just started it last night, iM good to go.

Didnt think so.

Shut up

flat_black · « **Reply #352 on:** April 07, 2010, 08:52:39 PM »

That was years ago, when i was on 215 45 16's and you were on M&H's even you know thats not a fair comparison...

we havent raced more than you can count on those fat little fingers of yours in TOTAL...

Now the bike, well that thing was just slow... its a 600

When its back running again, you can be the first thing it kills if you'd like.....

bigdaddyvtec · « **Reply #353 on:** April 07, 2010, 08:56:19 PM »

Bottom line is youve bet me 5 times to my raping your face tens of times.

Swallow that. I know how you like it.

Its ok honey, daddy knows....

I await more excuses for why your car is slow...
actually why you cant run me right now. NIgger

flat_black · « **Reply #354 on:** April 07, 2010, 08:59:54 PM »

Cause the motor has a hole in it!! And i dont want you to get your car dirty..

We havent even raced more then like 10 times total ....when have we raced besides a couple times on 167 and 405 both with me on 215 45 16?? we havent so quit fabricating storys with that sperm trap you call a mouth..

Get on MSN

bigdaddyvtec · « **Reply #355 on:** April 07, 2010, 09:05:16 PM »

You have a big mouth for someones whose car doesnt run. maybe you should fix that problem before runnig it anymore. ME>YOU....

Sux dont it....

All that money in that black hunk of slow would piss me off too. You dont walk shit son. Quit lying to yourself

Random Hero · « **Reply #356 on:** April 07, 2010, 09:06:29 PM »

Spiker, I wouldn't talk like that, next thing you know your car will be down.

bigdaddyvtec · « **Reply #357 on:** April 07, 2010, 09:07:36 PM »

no shit huh lol

flat_black · « **Reply #358 on:** April 07, 2010, 09:11:08 PM »

the black hunk of shit is out of your league on all levels besides power, so dont hate. If i wanted it to be faster than your pile it would be, and you know this.

Your really one to talk about me having a big mouth.. i mean really?

The differance between my Black car having money into and your car.... I WILL get every dime back out of it when/if i sold it... you not so much

Random Hero · « **Reply #359 on:** April 07, 2010, 10:02:47 PM »

I would pay you to have sex in your car.

News:

Author Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 224363 times)

Author Topic: LEED Tuned CB7 UPDATEpg 9 (Read 224363 times)