Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 119275 times)

Teg2boo · « **Reply #30 on:** March 28, 2009, 01:11:21 AM »

Quote from: bigdaddyvtec on March 27, 2009, 02:53:05 PM

More:

I've seen those pics before on ohmt no? I'm pretty sure...

Hello kitty FTW! Maybe not...

widebody93 · « **Reply #31 on:** March 28, 2009, 01:14:15 AM »

Noticed the fan

DOES that make enough flow to cool the water temps?

I'd go for a FAL EG setup and wire tie it in a 50/50 and then use that other fan off a relay temp switch with reverse polatity to use as a pusher fan.

Just my $0.02

bigdaddyvtec · « **Reply #32 on:** March 28, 2009, 01:21:29 AM »

Fan blows harder than your wife... He daily drives it, and it NEVER overheats

FUCK FAL....

LSD ftw

widebody93 · « **Reply #33 on:** March 28, 2009, 01:56:12 AM »

Quote from: bigdaddyvtec on March 28, 2009, 01:21:29 AM

Fan blows harder than your wife... He daily drives it, and it NEVER overheats

FUCK FAL....

LSD ftw

Thanks for speaking on all your friends behalf
AND LSD FAN='s VATOZONE same shit just no shipping cost, Nothin against LSD

bigdaddyvtec · « **Reply #34 on:** March 28, 2009, 02:57:58 AM »

Quote from: widebody93 on March 28, 2009, 01:56:12 AM

Quote from: bigdaddyvtec on March 28, 2009, 01:21:29 AM
Fan blows harder than your wife... He daily drives it, and it NEVER overheats

FUCK FAL....

LSD ftw

Thanks for speaking on all your friends behalf
AND LSD FAN='s VATOZONE same shit just no shipping cost, Nothin against LSD

And yet he STILL makes more power than you and isnt haf as queer (not that thats any suprise being as you are so fond of the gay tree)... Sometimes I ponder how your tiny little pickled brain supports life, you sure you didnt piss a fucking frontal lobe and not a kidneystone???

Go have a drink on me. Ill paypal you for it.

I had a big hand in the car, I have no problem speaking on it, and I know he doesnt mind either... NW REPRESENTING... MW FAILING

bigdaddyvtec · « **Reply #35 on:** March 28, 2009, 03:07:39 AM »

I see you widefaggot

widebody93 · « **Reply #36 on:** March 28, 2009, 03:08:12 AM »

OK
I'm glad for DrQPQut, that he has a public servant on his side. One that speaks for free

WELL PLAYED DRQPQUT

Well PLAYED
And are you stalking/pondering me Brian LOL

bigdaddyvtec · « **Reply #37 on:** March 28, 2009, 03:09:40 AM »

posting again huh

d112crzy · « **Reply #38 on:** March 28, 2009, 07:54:18 AM »

You guys ever figure out the clutch issue?

DRQPQUT · « **Reply #39 on:** March 28, 2009, 11:30:37 AM »

Quote from: d112crzy on March 28, 2009, 07:54:18 AM

You guys ever figure out the clutch issue?

supposedly the clutch only went together one way mike made some yellow marks well the first time i installed i noticed yellow marks but paid no attention to them installed wrong =fail but the short answer was yes i did competion twin disk tried and true

DRQPQUT · « **Reply #40 on:** March 28, 2009, 11:32:03 AM »

Quote from: widebody93 on March 28, 2009, 01:14:15 AM

Noticed the fan

DOES that make enough flow to cool the water temps?

I'd go for a FAL EG setup and wire tie it in a 50/50 and then use that other fan off a relay temp switch with reverse polatity to use as a pusher fan.

Just my $0.02

i have never had a over heating issue in between dyno runs we actually have to let my car warm up

boosted 00 black si · « **Reply #41 on:** March 28, 2009, 11:56:08 AM »

nice work man

got any ripper vids?

DRQPQUT · « **Reply #42 on:** March 28, 2009, 02:15:28 PM »

Quote from: boosted 00 black si on March 28, 2009, 11:56:08 AM

nice work man got any ripper vids?

on the way i had one ripper vid of me walking a supercharged hatch but for some reason he didnt post it

?? but once we get a few nice days in these parts ill get some

bigdaddyvtec · « **Reply #43 on:** March 28, 2009, 03:57:50 PM »

Im about to come rip dirty fourth off in front of your work OPEN DOWNPIPE style... Ross brought me the new battery and its all good to go.

Be about an hour... Listen for the whine of straightcuts, compressor and limiter acentuated by double barreled shotgun open 2 inch dumps, and Open 4" DP...

Ill make sure to have Josh give you the finger on the way by...

Joshes dad is bringing up the Ross monster, Stones is bringing up the hatchie and I we are on our way to our fab friends house to do the exhaust on my pile of shit. Ill stop by at some point.... If its after youre closed, I may pop by Justins..

Hopee it stops raining so we can go do some Real tuning.

DRQPQUT · « **Reply #44 on:** March 28, 2009, 06:20:34 PM »

Quote from: bigdaddyvtec on March 28, 2009, 03:57:50 PM

Im about to come rip dirty fourth off in front of your work OPEN DOWNPIPE style... Ross brought me the new battery and its all good to go.

Be about an hour... Listen for the whine of straightcuts, compressor and limiter acentuated by double barreled shotgun open 2 inch dumps, and Open 4" DP...

Ill make sure to have Josh give you the finger on the way by...

fuckin fuck fuck you dumb ass you made my boss shit her pants 2 stepping in front of my work was soooooooooooooooooooooooooooooo GAY dont shit where you sleep

Joshes dad is bringing up the Ross monster, Stones is bringing up the hatchie and I we are on our way to our fab friends house to do the exhaust on my pile of shit. Ill stop by at some point.... If its after youre closed, I may pop by Justins..

Hopee it stops raining so we can go do some Real tuning.

d112crzy · « **Reply #45 on:** March 28, 2009, 07:03:14 PM »

hahahaha. that's funny.

Urban Indian · « **Reply #46 on:** March 29, 2009, 01:52:46 AM »

sounds like a good time is going to be had by the big fat kids this summer

myself included

88dx · « **Reply #47 on:** March 29, 2009, 02:02:38 AM »

Dammmmmmm all the fat kids making good power on the H-series

widebody93 · « **Reply #48 on:** March 29, 2009, 02:23:01 AM »

U.I

Your trying to be fat just to mesh

Your cousin meshes well l!!!!!!!

Urban Indian · « **Reply #49 on:** March 29, 2009, 07:15:20 AM »

I am a big kid i guess

I need a hx-52 to push my ass around

bigdaddyvtec · « **Reply #50 on:** March 29, 2009, 07:21:50 AM »

Fucking Antilag is so loud and hits so hard thety you can see the dashboard flex up and down id say realistically 2 inches... Hood looks like its going to pop off too... I cant believe how well it runs for the VERY minor tuning weve done to one of eCtunes in-box basemaps. I am very impressed with it.

Very impressed... Put an exhaust on the car, but its really drony... Alot quieter than it was earlier today... Felt like someone shooting a shotgun RIGHT next to you...

exhaust is 4"ss to the 4" muffler under the shifter, then 4" aluminum to where it SHOULD go out to the side then back again... think Im going to end up running 2 mufflers....

Will be crashing the NW Nissan meet at Golden Gardens tomorrow.

d112crzy · « **Reply #51 on:** March 29, 2009, 07:26:40 AM »

haha, there's gonna be quite a few Hondas at the NWN meet. I have like 4 friends already going.

widebody93 · « **Reply #52 on:** March 29, 2009, 05:09:15 PM »

In for some video footage guys

Sounds like you guys are ready for a fun filled summer.

DRQPQUT · « **Reply #53 on:** March 29, 2009, 05:22:19 PM »

so been wanting to do a slight wire tuck. last nite had my buddy zac come over with a few other friends, put the wife in the kitchen broiling fat ass new york strips. FOOD=LABOR. so this is what we started with

so while zac was doing his thing, i decided to mess around a little.....now you see the radiator over flow

now you dont!!!! that gay ass bottle used to hang on the front of my rad. so now she's nestled nicely between rad. and intercooler

we worked on her till 3am so this is far as we got but are deep in the process now will post more pics later

widebody93 · « **Reply #54 on:** March 29, 2009, 06:12:03 PM »

Looks better I agree

bigdaddyvtec · « **Reply #55 on:** March 29, 2009, 09:07:09 PM »

You gyys get anymore done today ig??? I ended up going to the NWNissan meet, then saws Alex on his Gixxer and came down south to do some tuning.....

Ill stop buy on the way home :yes:

AstroVannin · « **Reply #56 on:** March 30, 2009, 08:52:51 AM »

I like the wire tuck ..... how would you rate the level of work required for it?

DRQPQUT · « **Reply #57 on:** March 30, 2009, 12:49:36 PM »

Quote from: AstroVannin on March 30, 2009, 08:52:51 AM

I like the wire tuck ..... how would you rate the level of work required for it?

at one point i felt as though i bit too much off on a scale to 1-10 10 being the hardest it was a 6.5
i have a friend named zac thats good he wrapped everything and shrink wrapped it if you want p.m. me ill give you his number

bigdaddyvtec · « **Reply #58 on:** March 30, 2009, 02:19:18 PM »

You need to paint the frontmount black... Just a couple LIGHT coats of semigloss black, and put the overflow in the engine compartment.. Itws gay where it is.

Practicality rules all son.

Once you get the driversside all done I think its going to look SOOOOmuch better... Glad you didnt put the fuse box in the cabin as well... You will be too.

Ill bring you the AN hardware and Spark plug cover later...

This and your new Chargepipe will make it look really nice :yes:

evo_lucian · « **Reply #59 on:** March 30, 2009, 07:50:12 PM »

car looks tits :yes: any quatermile times yet ?

News:

Author Topic: LEED Tuned CB7 ***UPDATE***pg 9 (Read 119275 times)

Author Topic: LEED Tuned CB7 UPDATEpg 9 (Read 119275 times)