:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

GET YOUR OFFICIAL REALHOMEMADETURBO.COM STICKERS! (link)

Pages: [1]   Go Down

Author Topic: OK, searching owns me. I need a new bearing for my dizzy  (Read 7943 times)

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
OK, searching owns me. I need a new bearing for my dizzy
« on: February 10, 2010, 10:55:23 AM »
I need a new distributer bearing for my b18b. Ive looked and cant find a part number anywhere. I want to just go down to my local napa and say here it is, give it to me. Let me know if you guys find a part number for me.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #1 on: February 10, 2010, 11:10:06 AM »
God you're a useless lazy fuck.  Acura distributor bearing is Koyo # 6001Z or Lordco # 0782401
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #2 on: February 10, 2010, 11:25:16 AM »
Thanks nog. And yes, im a lazy fuck. I did search but all i came up with was ones for accords.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #3 on: February 10, 2010, 02:23:03 PM »
Quote from: CSaddict on February 10, 2010, 11:10:06 AM
God you're a useless lazy fuck.  Acura distributor bearing is Koyo # 6001Z or Lordco # 0782401

Since your in spoon feeding mode, what's the P# for a d-seires?
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #4 on: February 10, 2010, 05:11:58 PM »
The replacement bearing part for Civics (88-91 JDM Civic SiR, USDM 88 and up), USMD Accords (90 and up), and USDM Legends (88-90) is a Nachi Bearing. The part number is 6001NSL.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

crttaz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1831
  • Old Wise One
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #5 on: February 11, 2010, 04:26:13 AM »
what about the seals????



Logged
OG before the OG'#039#039s

CSaddict

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #6 on: February 11, 2010, 11:24:55 AM »
Void if seal is broken.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #7 on: February 11, 2010, 12:35:21 PM »
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #8 on: February 11, 2010, 01:33:05 PM »
0782401 is the right part. Napa sells it for $6.39 the bearing size is 28mm OD 12mm ID, and 8mm thick. Its a koyo 6001rs bearing, but it is listed under a diff manfact. Its just a relabled koyo bearing. To bad i couldent get the tooth wheels off. They are pressed on and i just said fuck it after almost an hour of trying to nigger rig sometning to pull them off. They are not keyed on the shaft so im pretty sure that i would never be able to get them repressed back on in the same exact location and my car would run like shit, or not run at all. So i ordered a new dizzy from www.acuraoemparts.com for $100 shipped. I dont even realy want to fuck around with nigger rigging something an obd2 dizzy with a jumper and all that. I just want the right parts.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

chris

  • Guest
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #9 on: February 11, 2010, 06:37:30 PM »
100 BUCKS FOR A NEW oem DIST? 99.9999999999999% sure you ordered the wrong thing. Even the cdm ones are more than that
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #10 on: February 11, 2010, 07:09:49 PM »
Well it dosent come with a ignighter, coil, cap, or roter.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

chris

  • Guest
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #11 on: February 11, 2010, 08:04:22 PM »
You have a link? still sounds oddly cheap
Logged

ryan89crx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3228
  • 20lbs of love!
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #12 on: February 11, 2010, 08:24:26 PM »
« Last Edit: February 11, 2010, 08:26:00 PM by ryan89crx »
Logged
d-series on 20 pounds will turn you out!

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #13 on: February 11, 2010, 11:04:58 PM »
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #14 on: February 12, 2010, 01:01:42 AM »
fuckin cheap
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #15 on: February 12, 2010, 01:18:51 AM »
Dealz!!
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ryan89crx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3228
  • 20lbs of love!
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #16 on: February 12, 2010, 03:10:50 PM »
No coil, igniter, or heat sink, hopefully yours are still good
Logged
d-series on 20 pounds will turn you out!

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: OK, searching owns me. I need a new bearing for my dizzy
« Reply #17 on: February 12, 2010, 04:48:49 PM »
Mine work just fine. I just need a bearing. Most expensive bearing ive bought for this car =(
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437
Pages: [1]   Go Up
« previous next »