:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1] 2   Go Down

Author Topic: Done split another cylinder wall darn it to heck!  (Read 11330 times)

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Done split another cylinder wall darn it to heck!
« on: March 07, 2010, 02:36:38 AM »
At PIR again tonight, this time I brought the family out.

Swapped back to the 205/55/16 crap tires....

Pull a 12.55 @ 117.69 with a 2.1 60'... poop...

Wife wants to leave. C'mon, watch one more please?

I nail it... Its flipping perfect.

Then the #4 (I am betting) cylinder wall splits in 4th gear...... I keep the pedal to the metal...

Pull over at the end of the track, determine, yes, there is WATER everywhere, not oil. So I know I split the cylinder wall... Drive down the return lane and park.

My friend I was racing pulls up after getting his time slip (why would I want mine? I sucked ALL of 4th gear.)

"I think you want this"

60' 1.940
1/8 7.943
mph 91.75
1/4 12.499
mph 96.99

IF only the motor hadn't popped.  What if, what if, what if.......
Logged

Stealthmode

  • Mufukkken 5 black Star General
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 20246
Re: Done split another cylinder wall darn it to heck!
« Reply #1 on: March 07, 2010, 03:19:05 AM »
Doing work....you've done well.  :noel:
Logged
I think Stealthmode has a few children in some of his socks. I picked up one of his socks thinking it was mine and it was crunchy. Now I spend all day wondering what the hell might be laying eggs under my fingernails.

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Done split another cylinder wall darn it to heck!
« Reply #2 on: March 07, 2010, 03:43:25 AM »
Can't wait for the pic's!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #3 on: March 07, 2010, 04:24:54 AM »
give me 20 minutes.... or less...
Logged

Atticus

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1329
Re: Done split another cylinder wall darn it to heck!
« Reply #4 on: March 07, 2010, 04:41:49 AM »
Logged

Turbo hondas are like crack, you can say no for a little while but one day your gonna have to hit up Tyrone on the corner for a t3/t4.

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #5 on: March 07, 2010, 05:20:46 AM »
Did I make it in 20?

Logged

BangBusMaster

  • Full Member
  • ***
  • Offline Offline
  • Posts: 199
Re: Done split another cylinder wall darn it to heck!
« Reply #6 on: March 07, 2010, 07:01:33 AM »
Logged

1991civicsi

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1946
Re: Done split another cylinder wall darn it to heck!
« Reply #7 on: March 07, 2010, 07:18:13 AM »
What motor? Nice carnage BTW.
Logged
"quotquotThis ain'#039#039t no forum, its a gang.. "quotquot BigDaddyVtec

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Done split another cylinder wall darn it to heck!
« Reply #8 on: March 07, 2010, 11:08:28 AM »
Goddamn, you aren't afraid to make power.
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Done split another cylinder wall darn it to heck!
« Reply #9 on: March 07, 2010, 12:56:52 PM »
Can we get a look at the pistons, you still having issues with tuning?
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: Done split another cylinder wall darn it to heck!
« Reply #10 on: March 07, 2010, 01:06:32 PM »
Quote from: Joseph Davis on March 07, 2010, 11:08:28 AM
Goddamn, you aren't afraid to make power.
Or break shit.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

glustic

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2502
  • Jay is a fucking homo
Re: Done split another cylinder wall darn it to heck!
« Reply #11 on: March 07, 2010, 01:54:13 PM »
Logged
fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.. nbspnbsp BIG FUCKING MISTAKE

-BUK

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Done split another cylinder wall darn it to heck!
« Reply #12 on: March 07, 2010, 02:11:35 PM »
Quote from: patsmx5 on March 07, 2010, 01:06:32 PM
Quote from: Joseph Davis on March 07, 2010, 11:08:28 AM
Goddamn, you aren't afraid to make power.
Or break shit.

Or a little hard work putting it back together to be faster than ever.
Logged

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #13 on: March 07, 2010, 02:37:39 PM »
Pistons should be fine.

I am betting the crack started on a heavy pull a month or so ago and I had some bad det on pump gas.
Logged

Eggylshatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2188
  • Pen15 Club President
Re: Done split another cylinder wall darn it to heck!
« Reply #14 on: March 07, 2010, 04:01:25 PM »
you need a sleeved block?  and to stop detonating on pump gas, eh?  I just hate to see this beast down, it should be shredding the streets.  Is it still twin charged or are you just running a turbo now?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: Done split another cylinder wall darn it to heck!
« Reply #15 on: March 07, 2010, 04:08:32 PM »
Dude what moter is this now? Like your 5th one? I would just opt for a sleaved block. But fuck, that "what if" could have been good if it would have had together
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #16 on: March 07, 2010, 04:14:13 PM »
This is my family wagon, not the twincharged wagon.

Yeah, I would like a sleeved block, but thats money I do not have....

This failure is in a section of the block that happens to even STI blocks...

This is the 2nd time I have split a cylinder wall.

This motor has had 3 sets of pistons in about 13-14 months...

I am going to fill the weak section in with a pin for support this time.
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Done split another cylinder wall darn it to heck!
« Reply #17 on: March 07, 2010, 05:57:08 PM »
Quote from: reddevil on March 07, 2010, 04:14:13 PM
This is my family wagon, not the twincharged wagon.

Yeah, I would like a sleeved block, but thats money I do not have....

This failure is in a section of the block that happens to even STI blocks...

This is the 2nd time I have split a cylinder wall.

This motor has had 3 sets of pistons in about 13-14 months...

I am going to fill the weak section in with a pin for support this time.

Hum cant wait to see the build thread on that one.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: Done split another cylinder wall darn it to heck!
« Reply #18 on: March 07, 2010, 06:17:03 PM »
Quote from: reddevil on March 07, 2010, 04:14:13 PM
This is my family wagon, not the twincharged wagon.

Yeah, I would like a sleeved block, but thats money I do not have....

This failure is in a section of the block that happens to even STI blocks...

This is the 2nd time I have split a cylinder wall.

This motor has had 3 sets of pistons in about 13-14 months...

I am going to fill the weak section in with a pin for support this time.

You're like the hotrex of subies, except you actually make it to the track.

I'm impressed at the timeslip but fuck - at least spend a few bones on a starters accounting class. You will learn that even with "future value" of money figured in, the interest paid on a small loan will completely offset the time & money replacing pistons & blocks. Even if they are cheap for you.


Even cheap Honda people plunk done the money once they realize there's a chance they'll be splitting sleeves.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Done split another cylinder wall darn it to heck!
« Reply #19 on: March 07, 2010, 06:19:52 PM »
Pinning is a bad idea, it does not work as advertised.  Cylinder balloons under cyl pressure and the pin... you get the idea.  The sleeve, instead of cracking horizontally, will crack at a right angle due to the pin and then go from there.

I'd do a 1.5-2.0" band of devcon right around the point the sleeve likes to crack. 

Logged

sewell94

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2194
  • Border Jumper
Re: Done split another cylinder wall darn it to heck!
« Reply #20 on: March 07, 2010, 11:06:51 PM »
I dont believe in block posting, filiiing, or blockguards.   The sleeve cracking is a function of the strength of the sleeve, attempting to stop it from moving wont stop it from happening.
Logged
My real power is not interweb-based, although it does allow me to come across in the interwebs as a magical being shooting pixie dust and cupcakes out my asshole and such.

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Done split another cylinder wall darn it to heck!
« Reply #21 on: March 07, 2010, 11:26:06 PM »
Quote from: sewell94 on March 07, 2010, 11:06:51 PM
The sleeve cracking is a function of the strength of the sleeve, attempting to stop it from moving wont stop it from happening.


but it may slow it down.  it can propogate somewhere else at a higher pressure level. 


DEVCON ftw
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

Urban Indian

  • Snow Mexican
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3383
Re: Done split another cylinder wall darn it to heck!
« Reply #22 on: March 08, 2010, 12:00:57 AM »
Quote from: reddevil on March 07, 2010, 02:36:38 AM
IF only the motor hadn't popped.  What if, what if, what if.......

Shit is always its fastest as it explodes
Logged
The clock doesn'#039#039t own me

 Topless chick + dominos pizza + 750hp civic = epic win

sewell94

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2194
  • Border Jumper
Re: Done split another cylinder wall darn it to heck!
« Reply #23 on: March 08, 2010, 03:40:55 AM »
Quote from: onlyflash944 on March 07, 2010, 11:26:06 PM
Quote from: sewell94 on March 07, 2010, 11:06:51 PM
The sleeve cracking is a function of the strength of the sleeve, attempting to stop it from moving wont stop it from happening.


but it may slow it down.  it can propogate somewhere else at a higher pressure level. 


DEVCON ftw

   I dont agree with that.  It wont slow it down at all. If anything the change in the cooling of the cylinders/head will create hotspots increasing the likelyhood of cracking a sleeve. 
Logged
My real power is not interweb-based, although it does allow me to come across in the interwebs as a magical being shooting pixie dust and cupcakes out my asshole and such.

onlyflash944

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2741
  • Jack of all trades, Master of none
Re: Done split another cylinder wall darn it to heck!
« Reply #24 on: March 08, 2010, 10:14:20 AM »
Quote from: sewell94 on March 08, 2010, 03:40:55 AM
Quote from: onlyflash944 on March 07, 2010, 11:26:06 PM
Quote from: sewell94 on March 07, 2010, 11:06:51 PM
The sleeve cracking is a function of the strength of the sleeve, attempting to stop it from moving wont stop it from happening.


but it may slow it down.  it can propogate somewhere else at a higher pressure level. 


DEVCON ftw

   I dont agree with that.  It wont slow it down at all. If anything the change in the cooling of the cylinders/head will create hotspots increasing the likelyhood of cracking a sleeve. 

ok
Logged

You read some forums? nbspnbsp Cool, I tune cars.

  Its your fucking car, if you want to hack it up fucking go for it.

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: Done split another cylinder wall darn it to heck!
« Reply #25 on: March 08, 2010, 11:23:06 AM »
Quote from: sewell94 on March 07, 2010, 11:06:51 PM
I dont believe in block posting, filiiing, or blockguards.   The sleeve cracking is a function of the strength of the sleeve, attempting to stop it from moving wont stop it from happening.

Disagree, sort of.  I've seen it hold together very well in a couple motors, and the two the sleeves cracked in were still driveable enough that you could cruise the car home - while cracked they don't seperate and so coolant doesn't go anywhere, it just acts like a mild broken ring with oil smoke everywhere.  $35 and thirty minutes to devcon, vs $60-150 tow bill and 1-2.5 hours waiting on the truck.

Big caveat, most people pour their blocks too high - cylinder expands and splits lower down, and coolant flow at the top of the cylinder where it's hottest is important.
Logged

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #26 on: March 17, 2010, 01:02:12 AM »
Well, I had a new motor in 4 days later, but it was making some awful noises....


Time went by....


I found the issue, dealt with it.....

Dailydevil is driving again....

But for now?  Its a fucking transportation wagon....   I need to store up some money if I need to build a real motor again!  My daily car is 8mpg Econoline with no seats for the kids....
Logged

Phate

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 659
Re: Done split another cylinder wall darn it to heck!
« Reply #27 on: March 17, 2010, 01:22:48 AM »
Quote from: reddevil on March 17, 2010, 01:02:12 AM
My daily car is 8mpg Econoline with no seats for the kids....

Some would disagree on there not being room for kids...
Logged
It never ceases to confuse me that people think this is a car site.

http://i15.photobucket.com/albums/a380/overdrive14/2vkkmt3.png

reddevil

  • Full Member
  • ***
  • Offline Offline
  • Posts: 210
Re: Done split another cylinder wall darn it to heck!
« Reply #28 on: March 17, 2010, 01:40:41 AM »
Dude....  Get it right...


Logged

88dx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7885
Re: Done split another cylinder wall darn it to heck!
« Reply #29 on: March 17, 2010, 01:42:45 AM »
haha thats badass  :yes:
Logged
Pages: [1] 2   Go Up
« previous next »