Topic: WTB TIG (Read 18421 times)

malichite · « **Reply #30 on:** April 08, 2010, 02:32:54 PM »

All this was done on the HF tig

BenDover · « **Reply #31 on:** April 09, 2010, 03:46:18 PM »

That HF tig is a wall plug?...I found one but cant find no info on it

malichite · « **Reply #32 on:** April 09, 2010, 03:47:24 PM »

Quote from: BenDover on April 09, 2010, 03:46:18 PM

That HF tig is a wall plug?

220. I ran it on a 40 amp circuit but probably didn't need that much.

BenDover · « **Reply #33 on:** April 09, 2010, 03:52:49 PM »

damn i dont have access to a 220v

...guess im get the thermal arc 85

malichite · « **Reply #34 on:** April 09, 2010, 04:01:41 PM »

Had mine wired straight into the panal for a while.

ApexSilver06MR · « **Reply #35 on:** April 09, 2010, 04:43:35 PM »

them right there iz some secsee welds for a cdm HF welder sir

turbob16hatch · « **Reply #36 on:** April 09, 2010, 10:45:54 PM »

I had the little thermal arc 85, worked very good for a starter tig.

civiceggturbo · « **Reply #37 on:** April 10, 2010, 04:02:49 PM »

http://cgi.ebay.com/PowCon-300SS-Welder_W0QQitemZ110516905262QQcmdZViewItemQQptZBI_Welders?hash=item19bb52252e

see how much it goes for

BenDover · « **Reply #38 on:** April 17, 2010, 03:40:57 PM »

Been trying to find a tank for the welder...found bunch of oxy acetylene tanks.
Notice the valve on top is different..is there another add on adaptor?
Would the matheson gas fill it with argon?

SgtB · « **Reply #39 on:** April 17, 2010, 09:14:28 PM »

NO! Acetylene tanks have honeycomb and acetone in them. Oxygen maybe, but you have to ask first. Best bet is to buy the tank from the company your going to use. You swap it every refill, and you don't have to have it hydro-tested all the time.

BenDover · « **Reply #40 on:** May 13, 2010, 04:45:36 PM »

Been looking around for tanks...didnt have any luck
Might get one from ebay

http://cgi.ebay.com/60-CF-WELDING-CYLINDER-tank-bottle-nitrogen-argon-mixes-/180496183753?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2a066931c9

or

http://cgi.ebay.com/55cf-Welding-Tank-Cylinder-Bottle-Argon-Helium-Nitrogen-/200457576945?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item2eac33e1f1

runsfromdacops · « **Reply #41 on:** May 13, 2010, 05:20:22 PM »

has any one on here used a everlast 250ex? it looks like a good welder and its 1600$new

BenDover · « **Reply #42 on:** May 13, 2010, 07:09:39 PM »

off topic what does GFI stand for?

CSaddict · « **Reply #43 on:** May 13, 2010, 07:38:45 PM »

Ground Fault Interupt.

Passenger · « **Reply #44 on:** May 13, 2010, 08:14:47 PM »

Quote from: CSaddict on May 13, 2010, 07:38:45 PM

Gay Fags Inc.

hotrex · « **Reply #45 on:** May 14, 2010, 10:36:56 PM »

gfi stands for passenger is a porpusplugger

taintwich

runsfromdacops · « **Reply #46 on:** May 18, 2010, 02:15:15 PM »

Quote from: BenDover on May 13, 2010, 07:09:39 PM

off topic what does GFI stand for?

gay fab inc.

jabberwock · « **Reply #47 on:** May 18, 2010, 03:04:24 PM »

ratcityrex · « **Reply #48 on:** May 18, 2010, 03:58:45 PM »

Quote from: runsfromdacops on May 18, 2010, 02:15:15 PM

Quote from: BenDover on May 13, 2010, 07:09:39 PM
off topic what does GFI stand for?

gay fab inc.

lol

runsfromdacops · « **Reply #49 on:** May 20, 2010, 03:27:54 PM »

it sarted as a inside joke but now most of the ppl that rack it have the fastest cars around here.lol

gfi>nigger rigging

narfdanarf · « **Reply #50 on:** May 20, 2010, 04:06:18 PM »

when my application gets approved I'll be rockin a GFI sticker...lol.

Joseph Davis · « **Reply #51 on:** May 20, 2010, 06:18:06 PM »

Quote from: narfdanarf on May 20, 2010, 04:06:18 PM

when my application gets approved I'll be rockin a GFI sticker...lol.

The large round one approves of you, it's just some formalities now.

runsfromdacops · « **Reply #52 on:** May 20, 2010, 10:59:34 PM »

you get thounmbs up from me, you jsut need that pos to drive and your set :yes:

bigdaddyvtec · « **Reply #53 on:** May 20, 2010, 11:09:54 PM »

Narftards story of his username made me lol so hard i almost fell out of my chair at the dyno day... The picture of sewell deepthroating a 12 inch softserve completed the job and it crumbled with authority... Both JD and Sewll were laughing as hard as i was... at which point when i got up and pushed off my old ass coffee table in my room it too crumbled under the girth..

runsfromdacops · « **Reply #54 on:** May 21, 2010, 01:03:43 AM »

i neaver heard the story. do tell

narfdanarf · « **Reply #55 on:** May 21, 2010, 01:05:34 AM »

Quote from: runsfromdacops on May 20, 2010, 10:59:34 PM

you get thounmbs up from me, you jsut need that pos to drive and your set :yes:

Took it for a drive around the block today with no bumper or hood, trying to test out the boost solenoid, but I couldn't get anywhere, roads were just too wet. Neighbors love the 2-step though

runsfromdacops · « **Reply #56 on:** May 21, 2010, 02:29:58 AM »

sweet deal put some headlights in that bitch and lets go beat the shit out of it

Passenger · « **Reply #57 on:** May 21, 2010, 10:19:55 AM »

Quote from: hotrex on May 14, 2010, 10:36:56 PM

gfi stands for passenger is a porpusplugger

taintwich

Shouldn't you be taking care of the mail mans children?

Joseph Davis · « **Reply #58 on:** May 21, 2010, 02:04:09 PM »

Quote from: Passenger on May 21, 2010, 10:19:55 AM

Quote from: hotrex on May 14, 2010, 10:36:56 PM
gfi stands for passenger is a porpusplugger

taintwich

Shouldn't you be taking care of the mail mans children?

You can't prove they are both the mailman's.

runsfromdacops · « **Reply #59 on:** May 21, 2010, 04:22:31 PM »

harsh...

News:

Author Topic: WTB TIG (Read 18421 times)

civiceggturbo

jabberwock