:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: arp torque spec (rod bolts)?  (Read 5868 times)

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
arp torque spec (rod bolts)?
« on: April 10, 2010, 05:40:47 PM »
Well i have always heard you "should" stretch your rod bolts when using arp's. but is this 100% needed? Can i just torque them to spec and not worry about the stretch?

Also i have tried to look for the torque spec for these bolts but can't find them and i lost my packaging to look up the part numbers.

Please excuse my super noob post.

thanks
Logged

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: arp torque spec (rod bolts)?
« Reply #1 on: April 10, 2010, 05:46:59 PM »
Stretch is the best way as that is how fasteners work.

Which engine?

Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: arp torque spec (rod bolts)?
« Reply #2 on: April 10, 2010, 05:49:34 PM »
It's ls rods in a d16.
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: arp torque spec (rod bolts)?
« Reply #3 on: April 11, 2010, 12:54:25 PM »
bump
Logged

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: arp torque spec (rod bolts)?
« Reply #4 on: April 11, 2010, 02:33:03 PM »
Stretch is what ARP recommends.  I was a cheap ass and didn't get the stretch gauge so I just torqued mine down to the Honda specs. 
Logged
Quote from: bigdaddyvtec on June 04, 2009, 02:12:56 AM
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: arp torque spec (rod bolts)?
« Reply #5 on: April 11, 2010, 05:46:20 PM »
Quote from: malichite on April 11, 2010, 02:33:03 PM
Stretch is what ARP recommends.  I was a cheap ass and didn't get the stretch gauge so I just torqued mine down to the Honda specs. 

Anything i should worry about just torqueing them?
Logged

malichite

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1988
  • Harbor Freight Ninja!
Re: arp torque spec (rod bolts)?
« Reply #6 on: April 11, 2010, 05:47:55 PM »
I havn't had any issues, but I am also not the smartest  O0.  I tightened mine down loosened them up and then torqued them a second time.  Everything is still holding together.   
Logged
Quote from: bigdaddyvtec on June 04, 2009, 02:12:56 AM
You hhave just failed on so many levels, im waiting for someone else to verbally slap you in the gooch with a mallet

snm95ls

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3662
Re: arp torque spec (rod bolts)?
« Reply #7 on: April 11, 2010, 07:53:35 PM »
ARP shows 26 ft-lbs with their special lube.

0.005"-0.0055" stretch.
Logged

jagojon3

  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 17261
Re: arp torque spec (rod bolts)?
« Reply #8 on: April 11, 2010, 08:10:58 PM »
I've built a few engines with just the torque spec and no rod stretch gauge. You will be fine.
Logged

Turkey soup pancakes sir

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: arp torque spec (rod bolts)?
« Reply #9 on: April 11, 2010, 08:52:48 PM »
Thanks guys.

Logged

hatchboy

  • my wife= hotter than a 2 dollar pistol.
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3607
  • Bombs Over Baghdad
Re: arp torque spec (rod bolts)?
« Reply #10 on: April 13, 2010, 08:05:54 PM »
I just torqued on mine as well. No stretch gauge.
Logged

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: arp torque spec (rod bolts)?
« Reply #11 on: April 13, 2010, 09:56:55 PM »
Also torqued mine to Honda specs, loosened, re-torqued.
Logged

patsmx5

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1584
Re: arp torque spec (rod bolts)?
« Reply #12 on: April 13, 2010, 10:39:45 PM »
Different motor, but I torqued mine to ARP's spec of 45 ft*lbs lubed with engine oil. It worked fine so far.
Logged
Quote: Originally Posted by Adam Hopkins
There is no such thing as too much boost. You could have too little rod, piston, or sleeve. But never too much boost.

skaterdudz02

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 95
Re: arp torque spec (rod bolts)?
« Reply #13 on: April 13, 2010, 10:45:15 PM »
I never had a problem torquing it down to the factory spec + 10 ft lbs.
Logged

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: arp torque spec (rod bolts)?
« Reply #14 on: April 13, 2010, 10:50:30 PM »
I torqued them to 28ft lbs.
Logged

hatchboy

  • my wife= hotter than a 2 dollar pistol.
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3607
  • Bombs Over Baghdad
Re: arp torque spec (rod bolts)?
« Reply #15 on: April 13, 2010, 10:53:40 PM »
Quote from: turbob16hatch on April 13, 2010, 10:50:30 PM
I torqued them to 28ft lbs.

I torqued to 73.5 in. ft. in. lbs
Logged

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6811
  • I look around and all I see is Smegheads
Re: arp torque spec (rod bolts)?
« Reply #16 on: April 13, 2010, 11:47:31 PM »
Quote from: snm95ls on April 11, 2010, 07:53:35 PM
ARP shows 26 ft-lbs with their special lube.

0.005"-0.0055" stretch.

I torque mine to 30ft-lbs w/ ARP lube. :yes:
Logged

civiceggturbo

  • Guest
Re: arp torque spec (rod bolts)?
« Reply #17 on: April 16, 2010, 02:34:45 PM »
i torqued them like 3 or 4 times to make sure they seated
Logged
Pages: [1]   Go Up
« previous next »