:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

Jay & Trevor YOU WILL BE MISSED, RIP  :'(

Pages: [1]   Go Down

Author Topic: So...where to get a manifold?  (Read 6967 times)

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
So...where to get a manifold?
« on: May 06, 2010, 10:20:42 PM »
This is not for immediate purchase and will be at least a month before I'm actively searching for one, but turdbo manifolds...

I'd *really* like to have AC AND turbo, but I'm not sure how possible that would be in the CRX without being a complete pain in the ass.

I plan to use a T3/T04e .60 with a stage 5 turbine as suggested by the grand master wizard of the internets.

I'd prefer equal length as I ASSume it would be less wear on the turbo (probably not enough to matter) and spool better if the "pulses" reached the turbine in a steady beat...

Obviously I'd also need a downpipe, and possibly 3" exhaust while I'm at it...

Who can make it?  How much should I expect to pay?  B-series, BTW.

CRX or OCZC?
Logged

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7374
Re: So...where to get a manifold?
« Reply #1 on: May 06, 2010, 11:38:48 PM »
LOG or a splog
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ironcrx

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 792
Re: So...where to get a manifold?
« Reply #2 on: May 06, 2010, 11:57:37 PM »
top log?
Logged
"quotquotI lost a testical to cancer and I still got more balls than anyone else in the room!"quotquot

ApexSilver06MR

  • RealHomeMadeTurbo's "pee wee"
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9872
  • RealHomeMadeTurbo Resident Cocksmith!
Re: So...where to get a manifold?
« Reply #3 on: May 07, 2010, 01:10:29 AM »
Log if you want to retain A/C
Logged
pee wee for the size of my p..........

Nor*Cal Spoolin'#039#039 Nig Nog

theidealone

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 670
Re: So...where to get a manifold?
« Reply #4 on: May 07, 2010, 01:40:51 AM »
PM Buk.  :yes:
Logged

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: So...where to get a manifold?
« Reply #5 on: May 07, 2010, 02:50:17 AM »
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: So...where to get a manifold?
« Reply #6 on: May 07, 2010, 03:08:38 AM »
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: So...where to get a manifold?
« Reply #7 on: May 07, 2010, 07:37:07 AM »
Logged

Teg2boo

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4261
Re: So...where to get a manifold?
« Reply #8 on: May 07, 2010, 07:39:53 AM »
Logged


damn you guys too? its a fucking forum not a court room!
 Its not a forum its a gang.  

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: So...where to get a manifold?
« Reply #9 on: May 07, 2010, 09:42:04 AM »
Quote from: Jorsher on May 06, 2010, 10:20:42 PM
This is not for immediate purchase and will be at least a month before I'm actively searching for one, but turdbo manifolds...

I'd *really* like to have AC AND turbo, but I'm not sure how possible that would be in the CRX without being a complete pain in the ass.

I plan to use a T3/T04e .60 with a stage 5 turbine as suggested by the grand master wizard of the internets.

I'd prefer equal length as I ASSume it would be less wear on the turbo (probably not enough to matter) and spool better if the "pulses" reached the turbine in a steady beat...

Obviously I'd also need a downpipe, and possibly 3" exhaust while I'm at it...

Who can make it?  How much should I expect to pay?  B-series, BTW.

CRX or OCZC?

Dude you have almost 8k post and yet you dont know that equal is a bunch of BS for the most part. CSaddict or Corey can make what ever you need.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

SloS13

  • RHMT Ex-President
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: I am a geek!!
  • My avatar is broken
Re: So...where to get a manifold?
« Reply #10 on: May 07, 2010, 09:45:15 AM »
$60 ebay cast mani.  The outer cylinders and inner cylinders are equal length :-*
Logged

Jorsher

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8575
Re: So...where to get a manifold?
« Reply #11 on: May 07, 2010, 10:17:24 AM »
Quote from: SloS13 on May 07, 2010, 09:45:15 AM
$60 ebay cast mani.  The outer cylinders and inner cylinders are equal length :-*

you gonna port/clean it for me?

and fuck you crxvtec91 :P  seems obvious it would work better

I tried buk, but the one I got had extra holes ??? I couldn't figure it out
Logged

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: So...where to get a manifold?
« Reply #12 on: May 07, 2010, 12:56:22 PM »
external wastegates.
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: So...where to get a manifold?
« Reply #13 on: May 07, 2010, 12:59:32 PM »
I will tell you a/c and b series in a crx is not very easy and i have only seen 2 setup's that had a/c in years. So unless you want to spend a fuck ton for some guy to install and remove the parts 50 times to line everything up for fitment it's not happening.

Also if you want a decent manifold look into the quick-4 style manifolds. there compact and will make plenty of power.

Oh and equal length and shit is stupid. /thread
Logged

Joseph Davis

  • Verbal Assault Technician
  • RHMT Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 34733
  • Eugenics prevents retards like widebody93
    • TURBO THIS
Re: So...where to get a manifold?
« Reply #14 on: May 07, 2010, 09:55:15 PM »
Quote from: turbob16hatch on May 07, 2010, 12:59:32 PM
Buk makes all my manifolds for me now, I just charge $20 more and have him drop ship them. 
Logged

arsenio

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 27
  • I have the word "CockHound" tattooed on my neck
Re: So...where to get a manifold?
« Reply #15 on: May 07, 2010, 10:20:53 PM »
Logged
I am currently banned for being a piece of shit.
Will you miss me?

turbob16hatch

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2080
Re: So...where to get a manifold?
« Reply #16 on: May 07, 2010, 11:07:20 PM »
Quote from: Joseph Davis on May 07, 2010, 09:55:15 PM
Quote from: turbob16hatch on May 07, 2010, 12:59:32 PM
Buk makes all my manifolds for me now, I just charge $20 more and have him drop ship them. 

I only wish, have you seen those welds lately?
Logged

evo_lucian

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 669
Re: So...where to get a manifold?
« Reply #17 on: May 09, 2010, 01:51:29 PM »
sinktrap ftw  O0
Logged
Pages: [1]   Go Up
« previous next »