:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

RHMT DIY Hub Dyno?!?!? check it. (link)

Pages: [1]   Go Down

Author Topic: DIY d-series catch can, now with SLASH CUT  (Read 16260 times)

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
DIY d-series catch can, now with SLASH CUT
« on: March 07, 2009, 06:45:43 PM »

Last motor went from crank pressure (i think) so i wanted to come up with a better PCV solution than i tried previously.

these pictures should be self explanitory...

the catch can is made from some 2.5" exhaust, with 1/2" OD tube nipples and a 1" OD tube nipple for the filter.

the black box has a 1/2" OD tube welded in it so its not being restrictive anymore. (inlet is 1").

Run the two 1/2 inch hoses from the black box to the catch can, and run another 1/2 inch from the VC vent to the can. I think i might have a local shop weld in a 1/2" nipple on the VC so I can vent it some more, and add another to the catch can.

All in all it cost me about $35 including hose and filter. "This price also includes 2 pints of RickP's blood."   ROFL!!! hahah.  didnt see that at first. 











and OMG... props from JD.

Quote from: Joseph Davis;1051343
Good to see some solid grassroots DIY, props.

« Last Edit: March 29, 2009, 06:51:27 PM by danz »
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: DIY d-series catch can, now with SLASH CUT
« Reply #1 on: March 07, 2009, 07:07:48 PM »

so when you are in vac how dose the intake tube on the vc get air in if its being sucked out by the exhaust? Wouldnt they be fighting eachother? Im getting ready to build my can and im doing a slash cut also, bit Im trying to figure out how to set up the breather on my vc. :-\
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: DIY d-series catch can, now with SLASH CUT
« Reply #2 on: March 07, 2009, 11:11:11 PM »

how about you tell me why you want your valve cover to suck air in ():)
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

CSaddict

  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10484
Re: DIY d-series catch can, now with SLASH CUT
« Reply #3 on: March 07, 2009, 11:26:57 PM »

V8 guys have been doing that for years. Great rendition of a classic!! Nice work.
Logged
Your fat ass is just going to drive around in your pile of shit car that is marketed towards 40 yr old recently divorced women trying to be hot shit.

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: DIY d-series catch can, now with SLASH CUT
« Reply #4 on: March 08, 2009, 12:09:37 AM »

true.. those v8 bastards do everything first..  :yes:

only down side of my setup is the gas velocity is rather low at that point in the exhaust track.. not like after the collector on an NA 4:1 header, which is usually where the v8 crowd install their slash cut.

but it will works good at high rpm which is when it matters most. 

if i ever get off my ass and find a cheap (or free) vacuum gauge ill find out what kinda vac it really pulls.
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

t_cel_t

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3147
Re: DIY d-series catch can, now with SLASH CUT
« Reply #5 on: March 08, 2009, 02:52:13 PM »

so when you are in vac how dose the intake tube on the vc get air in if its being sucked out by the exhaust? Wouldnt they be fighting eachother? Im getting ready to build my can and im doing a slash cut also, bit Im trying to figure out how to set up the breather on my vc. :-\

google venturi effect
Logged
malone labe

I think all cop cars need to have turbo. nbspnbsp Then they would understand the necessity of putting your foot down and how uncontrollable the urge is to fucking rail on that shit.

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: DIY d-series catch can, now with SLASH CUT
« Reply #6 on: March 08, 2009, 02:58:30 PM »

Maybe weld a fitting onto a 3/4" or whatever size needed so it fits where the o2 sensor goes(on the dp).

Awesome can though.

What I've always wondered is what that black box does? Us F/H owners don't have that on our cars. Is it an empty box that hooks up to the back of the block and the valve cover?
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: DIY d-series catch can, now with SLASH CUT
« Reply #7 on: March 08, 2009, 03:08:37 PM »

Maybe weld a fitting onto a 3/4" or whatever size needed so it fits where the o2 sensor goes(on the dp).

Awesome can though.

What I've always wondered is what that black box does? Us F/H owners don't have that on our cars. Is it an empty box that hooks up to the back of the block and the valve cover?




Bolts to the block and alowes crank case pressure to go out therw there and to a tube that has a pcv valve attached to it where it then goes to the intake manifold and sucks the blowby out.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

d112crzy

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3449
  • white power
    • CrzyTuning
Re: DIY d-series catch can, now with SLASH CUT
« Reply #8 on: March 08, 2009, 03:20:52 PM »

AHh, ok. I thought it went to the valve cover. Our shit goes from IM directly to the valve cover.
Logged
www.crzytuning.com


Nobody comes into my house and shits all over it.  

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: DIY d-series catch can, now with SLASH CUT
« Reply #9 on: March 08, 2009, 03:27:11 PM »

Same idea, it just goes from the back of the block instead of the valve cover.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

snarf

  • Full Member
  • ***
  • Offline Offline
  • Posts: 188
Re: DIY d-series catch can, now with SLASH CUT
« Reply #10 on: March 09, 2009, 12:26:41 AM »

2.5" exhaust genius why the hell didn't I think of this.  I'm going to build one of these but without the black box.  I'm curious to see how much oil it collects.

Atticus

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 1329
Re: DIY d-series catch can, now with SLASH CUT
« Reply #11 on: March 09, 2009, 01:23:16 AM »



if i ever get off my ass and find a cheap (or free) vacuum gauge ill find out what kinda vac it really pulls.


you lazy fuck..... I told you you can borrow my extra one to test it
Logged

Turbo hondas are like crack, you can say no for a little while but one day your gonna have to hit up Tyrone on the corner for a t3/t4.

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
Re: DIY d-series catch can, now with SLASH CUT
« Reply #12 on: March 09, 2009, 10:35:37 AM »

MS paint your routing im curious

trevor72

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 467
  • trevwhore
Re: DIY d-series catch can, now with SLASH CUT
« Reply #13 on: March 09, 2009, 01:30:35 PM »

mother fucker, exactly what i have planned for mine, right down the the moroso knock off breather and one way valve.  (same kem parts as what's on the stang) Cept mine will hopefully be square and alum. 

ps good work
Logged

brine04

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2251
  • B-North
Re: DIY d-series catch can, now with SLASH CUT
« Reply #14 on: March 10, 2009, 02:02:45 PM »

anyone have a part number or link for that one way valve?
Logged
92GSR - mild interest

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: DIY d-series catch can, now with SLASH CUT
« Reply #15 on: March 10, 2009, 02:37:33 PM »

anyone have a part number or link for that one way valve?

You can get them off any gm car from the mid 80's on. Normaly they fit in your pocket pretty well when you go to the wrecking yard :evil:
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

1Fast68

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 414
Re: DIY d-series catch can, now with SLASH CUT
« Reply #16 on: March 10, 2009, 03:16:02 PM »

V8 guys have been doing that for years. Great rendition of a classic!! Nice work.
:yes: Evac systems are Pretty common in the V8 world, only issue is they aren't recommended for cars with restrictive mufflers/exhaust as they can actually create more harm then help.

My collectors have the bungs welded in for Evac tubes but I have kept them capped off as I felt my mufflers are too restrictive. I will use them when i put my new bullet muffs on.
Logged
 The import scene is traditionally really dumb and everyone in it thinks they’re hot shit. There have ALWAYS been domestics that could flay any import… the simple fact is when you have a car that runs 9s you dont feel the need to hunt down and impress Honda owners

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: DIY d-series catch can, now with SLASH CUT
« Reply #17 on: March 12, 2009, 02:14:53 AM »

anyone have a part number or link for that one way valve?

Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6

michigan_soler

  • Full Member
  • ***
  • Offline Offline
  • Posts: 220
Re: DIY d-series catch can, now with SLASH CUT
« Reply #18 on: March 13, 2009, 06:18:50 PM »

Logged

Towdogg

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2834
  • Cfm's don't roll through an air intake!
Re: DIY d-series catch can, now with SLASH CUT
« Reply #19 on: March 13, 2009, 09:43:54 PM »

This is Good shit!

I need to do 1 also..
Logged

Emperor

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: DIY d-series catch can, now with SLASH CUT
« Reply #20 on: March 17, 2009, 12:09:32 PM »


WTF explain the intake cover
or is it a hose???
Logged
RHMT Boost everything
-Cars
-Bikes
-Trucks -Airplanes -......... and last but not least  YOUR MOM http://www.cslab.ntua.gr/~phib/images/doom/anim/sht2.gif

HiProfile

  • Certified OG
  • *****
  • Online Online
  • Posts: 4564
  • Injector Kingpin
Re: DIY d-series catch can, now with SLASH CUT
« Reply #21 on: March 18, 2009, 01:59:46 AM »

THose are breathers, very common on older cars. The one you see is basicly an enclosed filter which can have a tube hooked to the outlet. I think I'll be doing this before summer, my car currently just has a vent on the VC. :-X

If you have a very restrictive exhaust, you can still do a slashcut, but you'd want an extra check valve vented to atmosphere. It would go between the breather and the slashcut check valve. In case the exhaust backpressure overcomes the suction from the slashcut (albeit unlikely), it would still allow crankcase pressure out.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

Aero

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 622
    • Turbotalk.org
Re: DIY d-series catch can, now with SLASH CUT
« Reply #22 on: March 20, 2009, 12:31:28 AM »

I would love to see a measurement of vacuum from the exhaust through a pull.  One of the guys here in town did it on his spirit R/T.

stealthiskey

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 441
Re: DIY d-series catch can, now with SLASH CUT
« Reply #23 on: March 20, 2009, 01:03:17 AM »

If the can has a filter on the top, won't most of the gas pulled from the slash cut come from the fresh air through the filter rather than the crankcase?

,proportional to the ratio of opening diameters on the filter and inlet tube (O vs o)

Unless blowby mass is greater than vacuum mass, so that the remaining mass would vent to atmospheric pressure at (14.7 psi absolute)

Hook a vac gauge to the can and see if you pull more vac with the filter, or with that opening blocked.
Logged

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6759
  • I look around and all I see is Smegheads
Re: DIY d-series catch can, now with SLASH CUT
« Reply #24 on: March 20, 2009, 09:40:01 AM »

Yeah remember the balance mass flow equations  M1=M2  from fluid dynamics.

In other words you can not pull more gases out the slash cut than you can have gases going in to the catch can. ;D

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7369
Re: DIY d-series catch can, now with SLASH CUT
« Reply #25 on: March 20, 2009, 01:33:18 PM »

If you look at the pics where its on the car, He dosent have the filter on the catch can anymore. He went to a baffeled valve cover breather off of a V8 stlye
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

danz

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 6783
  • 0-60 in 2.7 seconds
Re: DIY d-series catch can, now with SLASH CUT
« Reply #26 on: March 20, 2009, 08:24:41 PM »

If you look at the pics where its on the car, He dosent have the filter on the catch can anymore. He went to a baffeled valve cover breather off of a V8 stlye

yup..  cabin doesnt stink like poison anymore either.
Logged
10.510 @ 133.09 mph D16Z6 EJ6
10.912 @ 127.33 mph D16A6 ED6
Pages: [1]   Go Up