Topic: car is back up and running: update shes hurt. (Read 11659 times)

runsfromdacops · « **on:** July 08, 2010, 07:18:04 PM »

yep got her all back together new disks are in and the tranny has a new in put shaft. also during the project i found out y my car was makeing shity power. the flex pipe in the ex. had calapsed down to about a 1" hole on the inside. so i made 430/280 on 1" ex. lol hopeing for a retune this comeing week and 600 on pump/meth

jagojon3 · « **Reply #1 on:** July 08, 2010, 07:21:54 PM »

chris · « **Reply #2 on:** July 08, 2010, 07:23:36 PM »

flat_black · « **Reply #3 on:** July 08, 2010, 07:52:48 PM »

Awesome, i just finished installing direct port meth on my new motor.... GL

TheMadScientist · « **Reply #4 on:** July 08, 2010, 08:06:48 PM »

Quote from: flat_black on July 08, 2010, 07:52:48 PM

Awesome, i just finished installing direct port meth on my new motor.... GL

This is begging for some quote fix just can't think of one right now

colt45 · « **Reply #5 on:** July 08, 2010, 08:35:38 PM »

Quote from: flat_black on July 08, 2010, 07:52:48 PM

Awesome, i just finished installing direct port meth on my wife.... GL

booya

narfdanarf · « **Reply #6 on:** July 08, 2010, 08:49:21 PM »

awesome that's good to hear alex...you should have no problems making those numbers.

Joseph Davis · « **Reply #7 on:** July 08, 2010, 08:57:28 PM »

Quote from: runsfromdacops on July 08, 2010, 07:18:04 PM

yep got her all back together new disks are in and the tranny has a new in put shaft. also during the project i found out y my car was makeing shity power. the flex pipe in the ex. had calapsed down to about a 1" hole on the inside. so i made 430/280 on 1" ex. lol hopeing for a retune this comeing week and 600 on pump/meth

I wondered why nothing I did made any more power. Glad it was something simple - car certainly scoots for 1" exhaust.

runsfromdacops · « **Reply #8 on:** July 08, 2010, 09:12:49 PM »

fuck i almost shit myself when a looked at the inside of the flex section. but it explanes y my car was being so gay.

bigdaddyvtec · « **Reply #9 on:** July 09, 2010, 12:13:10 AM »

You almost shit yoyurself because you lack sphincter control from having a gaggle of fags run cock into that poor twat of a hole you call your anus.

HiProfile · « **Reply #10 on:** July 09, 2010, 12:58:21 AM »

Quote from: bigdaddyvtec on July 09, 2010, 12:13:10 AM

You almost shit yoyurself because you lack sphincter control from having a gaggle of fags run cock into that poor twat of a hole you call your anus.

I'll I'm getting from that terrible assemblage of words is you enjoy 1" loose anus's to fuck.

Joseph Davis · « **Reply #11 on:** July 09, 2010, 01:02:42 AM »

Quote from: HiProfile on July 09, 2010, 12:58:21 AM

Quote from: bigdaddyvtec on July 09, 2010, 12:13:10 AM
You almost shit yoyurself because you lack sphincter control from having a gaggle of fags run cock into that poor twat of a hole you call your anus.

I'll I'm getting from that terrible assemblage of words is you enjoy 1" loose anus's to fuck.

You've been here for years, Jeff. That hasn't become obvious yet?

runsfromdacops · « **Reply #12 on:** July 10, 2010, 09:03:32 AM »

got the 4" alum. ex. all set up and man is it load. get my tune on tesuday :yes:

bigdaddyvtec · « **Reply #13 on:** July 10, 2010, 09:09:59 AM »

load? as in; your face or LOUD.... as in... Me

DRQPQUT · « **Reply #14 on:** July 10, 2010, 04:33:15 PM »

Quote from: bigdaddyvtec on July 10, 2010, 09:09:59 AM

load? as in; your face or LOUD.... as in... Me

:yes:

leed · « **Reply #15 on:** July 10, 2010, 08:10:53 PM »

Hahha, that sucks dude. Atleast it was simple. Your setup is gonna make the power now :)Recal

runsfromdacops · « **Reply #16 on:** July 13, 2010, 08:46:54 PM »

so i had her tunned today and all was going good she made 523/300 on just pump. made 2 pulls on meth/water and about the same power, sounded great. next pull it lost 40hp and 1/2 psi of boost. we add 1deg of timeing to bring it back up and she lost 15 more hp. wtf? looked at the plugs and they were fine. one more pull and its still down on power then as its idleing if you tap the gas you can hear a slight rod knock. gay.....

any one have a ls crank laying around?

BoostedSchemes · « **Reply #17 on:** July 13, 2010, 08:50:36 PM »

i hear DBV gets crank for the low

Ntrain2k · « **Reply #18 on:** July 13, 2010, 09:13:31 PM »

Quote from: runsfromdacops on July 13, 2010, 08:46:54 PM

so i had her tunned today and all was going good she made 523/300 on just pump. made 2 pulls on meth/water and about the same power, sounded great. next pull it lost 40hp and 1/2 psi of boost. we add 1deg of timeing to bring it back up and she lost 15 more hp. wtf? looked at the plugs and they were fine. one more pull and its still down on power then as its idleing if you tap the gas you can hear a slight rod knock. gay.....

any one have a ls crank laying around?

With it dropping like that you couldn't tell something serious was going on?

t_cel_t · « **Reply #19 on:** July 13, 2010, 09:17:52 PM »

couldnt it have been heat soak that can bring down power? maybe thats what they were thinking?

Ntrain2k · « **Reply #20 on:** July 13, 2010, 09:27:59 PM »

I'd have been looking further, but I'm just a bystander.

runsfromdacops · « **Reply #21 on:** July 13, 2010, 10:14:19 PM »

we thought it was the meth and it not wanting more timeing. we took all the time back to the pump gas setings (10ish degs.) and it was still down on power thats when we know something was wrong.

turbohf · « **Reply #22 on:** July 13, 2010, 10:45:22 PM »

Quote from: runsfromdacops on July 13, 2010, 08:46:54 PM

any one have a ls crank laying around?

LS crank, and a brand new set of eagle rods...

Joseph Davis · « **Reply #23 on:** July 13, 2010, 10:55:04 PM »

In for pics of the upper rod bearing halves.

runsfromdacops · « **Reply #24 on:** July 13, 2010, 10:57:06 PM »

Quote from: turbohf on July 13, 2010, 10:45:22 PM

Quote from: runsfromdacops on July 13, 2010, 08:46:54 PM

any one have a ls crank laying around?

LS crank, and a brand new set of eagle rods...

i just need 1 rod :-)

you have a pm

flat_black · « **Reply #25 on:** July 13, 2010, 11:00:19 PM »

Man this car HATES you, WTF how high where you revving it

runsfromdacops · « **Reply #26 on:** July 13, 2010, 11:02:42 PM »

9.5k
and yes i think i might just hate me or it just really likes the garage

Joseph Davis · « **Reply #27 on:** July 13, 2010, 11:09:59 PM »

9500? You might want to slip a GSR girdle in there while you have it apart.

runsfromdacops · « **Reply #28 on:** July 14, 2010, 01:10:26 AM »

im just tuneing at 9.5 to give me some head room at the track i think ill end up reving it to 8.5-9k

Ntrain2k · « **Reply #29 on:** July 14, 2010, 07:16:19 AM »

I'd still girdle it.

Cheap insurance.

News:

Author Topic: car is back up and running: update shes hurt. (Read 11659 times)

chris