Topic: not so much fail in this thread. my turbo e30 project 1 week left NSFW (Read 12656 times)

FastGermanCar · « **on:** April 07, 2009, 01:51:18 AM »

i lsot my camera in vegas, i think it still at my friends house.

heres some pics of my project. this will be my thread for the next week. i have no school or work for a week, so its time to get dirty

i made this manifold made before they came out with a ching chong one for the e30

it sucks and i dont know if it will last it's solid for now

running a 16g i know thats small it was going to go on my accord, then i wanted to do a ghetto cheap setup now i have megasquirt and everything you an imagine.

so heres the first crappy pics

oh and yes my turbo is up high i think im going to run the intake right out a hood slot, matched on both sides.

and also for my jpipe can i use a pvc bend to the intercooler piping its very tight and secure. or will pvc get hot that close to the turbo....

im going to search for porn and make this thread interesting

kamilk69 · « **Reply #1 on:** April 07, 2009, 01:53:26 AM »

epic failure

7808 · « **Reply #2 on:** April 07, 2009, 01:55:26 AM »

nice pictures. i cant see SHIT seriously dont even post pictures that shitty, looks like u used a 1950 under water camera thats broken

u can use pvc if you want nobdy cares

does it run/faster then it was? if so good job if not fuckyou

kamilk69 · « **Reply #3 on:** April 07, 2009, 01:58:24 AM »

the pics arent the reason for the failure.

FastGermanCar · « **Reply #4 on:** April 07, 2009, 02:25:26 AM »

Quote from: kamilk69 on April 07, 2009, 01:53:26 AM

epic failure

really?

oh what the fuck it wont display all my porn

CSaddict · « **Reply #5 on:** April 07, 2009, 07:10:28 AM »

You can't run that turbo for long in that position unless your pics suck so bad that its actually not mounted on its side.

dvst8r · « **Reply #6 on:** April 07, 2009, 09:51:22 AM »

This is fully as much fail, as the street racers in the rain.

kamilk69 · « **Reply #7 on:** April 07, 2009, 02:37:48 PM »

Quote from: CSaddict on April 07, 2009, 07:10:28 AM

You can't run that turbo for long in that position unless your pics suck so bad that its actually not mounted on its side.

bingo thats the epic failure

FastGermanCar · « **Reply #8 on:** April 07, 2009, 07:35:07 PM »

Quote from: kamilk69 on April 07, 2009, 02:37:48 PM

Quote from: CSaddict on April 07, 2009, 07:10:28 AM
You can't run that turbo for long in that position unless your pics suck so bad that its actually not mounted on its side.

bingo thats the epic failure

haha yeah those pics are shit. but now that you mention it... it looks pretty bad, its at a 45 degree angle. you cant see it at all from those shit ass pictures lol. i got a digi now i will take better ones.

i think it will survive, its only a 45 degree angle... it is angled so that the intake pipe sits on the valve cover and goes horizontal not vertical

rsmith2786 · « **Reply #9 on:** April 07, 2009, 08:33:04 PM »

Not a chance. Oil will be coming out everywhere.

dvst8r · « **Reply #10 on:** April 07, 2009, 09:31:29 PM »

kamilk69 · « **Reply #11 on:** April 07, 2009, 09:38:15 PM »

Quote from: FastGermanCar on April 07, 2009, 07:35:07 PM

Quote from: kamilk69 on April 07, 2009, 02:37:48 PM
Quote from: CSaddict on April 07, 2009, 07:10:28 AM
You can't run that turbo for long in that position unless your pics suck so bad that its actually not mounted on its side.

bingo thats the epic failure
i think it will survive, its only a 45 degree angle... it is angled so that the intake pipe sits on the valve cover and goes horizontal not vertical

still an epic failure.

FastGermanCar · « **Reply #12 on:** April 07, 2009, 10:16:31 PM »

wow im an idiot

so should i just make another manifold, or not try again because i suck too much and

buy a china made? is this any good?

CSaddict · « **Reply #13 on:** April 07, 2009, 11:33:12 PM »

No, that is complete shit BUT its better than what you have now.

malichite · « **Reply #14 on:** April 07, 2009, 11:47:36 PM »

Wow, that is quantum fail, plus new china manifold = double epic fail.

BoostedSchemes · « **Reply #15 on:** April 08, 2009, 02:30:50 AM »

I actually put a total of 10,000 miles on that but only 5,000 miles were of abusive high boost.... and you neglected to mention that my piston makes the taco taco flange look like forged

TheMadScientist · « **Reply #16 on:** April 08, 2009, 04:50:04 AM »

Get rid of that thing that's on there now and get the SS auto crap It will at least position the turbo correctly

crxvtec91 · « **Reply #17 on:** April 08, 2009, 11:12:12 AM »

Take some better pic's you might be able to rework it,

civiceggturbo · « **Reply #18 on:** April 09, 2009, 08:22:29 PM »

the only way i would by another china manifold would be if it was allready cracked

HiProfile · « **Reply #19 on:** April 12, 2009, 12:31:58 AM »

Turbos will usually die young if the shaft is more than 30* off of horizontal. Ideally you want it to be 15* or less.

The only way you could do worse is by giving your turbo's inlet some gay "bmw angel eyes". That would make me laugh harder.

BTW it appears you like them young. Got any of the kiddies at the park??

snarf · « **Reply #20 on:** April 12, 2009, 12:40:36 AM »

This could work, If you live on top of a mountain and are only going to boost on your way home.

News:

Author Topic: not so much fail in this thread. my turbo e30 project 1 week left NSFW (Read 12656 times)

civiceggturbo