Topic: d series mini-ram (Read 20723 times)

turbob16hatch · « **on:** April 10, 2009, 08:57:45 AM »

Well i figure i better contribute to the site.

Here is a D series mini-ram i put together for a guy not to long ago.

i never got any pics after the wastegate tube was welded on, but oh well.

i have been working on my flange welds as i have had some trouble with keeping them uniform around the whole pipe.

LMK what ya think

malichite · « **Reply #1 on:** April 10, 2009, 09:04:26 AM »

That shit looks bad ass danmit. Now I have another welder to add to the list of aspiring to be like.

walter · « **Reply #2 on:** April 10, 2009, 09:33:57 AM »

wow nice

what steel did u use for make it?

Malichite, how's going the log mani?

turbob16hatch · « **Reply #3 on:** April 10, 2009, 09:37:25 AM »

i use 304 sch 10 pipe fittings

onlyflash944 · « **Reply #4 on:** April 11, 2009, 02:20:46 PM »

Quote from: malichite on April 10, 2009, 09:04:26 AM

That shit looks bad ass danmit. Now I have another welder to add to the list of aspiring to be like.

+1

danz · « **Reply #5 on:** April 11, 2009, 02:45:06 PM »

how is the drain on that thing?

Toysrme · « **Reply #6 on:** April 12, 2009, 12:29:08 AM »

1) absolutely horrible gas coverage
2) you somehow managed to burn some the stainless up at a piss ant 30-40amps worth of welding current - because you travel SO FUCKING SLOWLY trying to make "pretty welds".

Get your head down in the god damned part where you can see, use proper gas coverage, currents and travel speeds.

turbob16hatch · « **Reply #7 on:** April 12, 2009, 02:50:06 AM »

Quote from: Toysrme on April 12, 2009, 12:29:08 AM

1) absolutely horrible gas coverage
I work the torch to get the color in the welds that is "perfered" by my customers. is there something you see wrong in my welds?
2) you somehow managed to burn some the stainless up at a piss ant 30-40amps worth of welding current - because you travel SO FUCKING SLOWLY trying to make "pretty welds".
I had my welder set at 80 amps on all pipe welds and collector welds and was pretty close to flooring it. also on the flange welds i set it up to 130 amps and am very close to full on. and i can assure you i do not travle slow at all.

Get your head down in the god damned part where you can see, use proper gas coverage, currents and travel speeds.

btw toys i am turbob16hatch off ohmt.

anyways lmk on the color side of things, and for the most part the weld tie in on the flanges and the consistency on the pipe welds.

turbob16hatch · « **Reply #8 on:** April 12, 2009, 02:52:43 AM »

Quote from: danz on April 11, 2009, 02:45:06 PM

how is the drain on that thing?

i'ts not that bad, stevemode made a good video regarding it.

danz · « **Reply #9 on:** April 12, 2009, 04:14:09 AM »

he made that video just for you eh? impressive.

CSaddict · « **Reply #10 on:** April 12, 2009, 08:09:14 AM »

That video needs to be posted. NOW.

turbob16hatch · « **Reply #11 on:** April 18, 2009, 07:11:06 PM »

i talked to steve and he said he pulled it down to clean up his account or something.

idk he should post it back up i think

jarban · « **Reply #12 on:** July 24, 2009, 06:32:20 AM »

How did you get that polished look on the pipes? I want to get a similar finish on mines. Do I need to jsut use some fine grit to clean it up or is there more to it?

Gonna try it out on some test bits.

Lowerit · « **Reply #13 on:** July 24, 2009, 08:22:36 AM »

That made me

Looks tits

turbob16hatch · « **Reply #14 on:** July 24, 2009, 11:44:05 AM »

red scotch brite pad on a angle grinder is your friend for nice looking pipes.

you can get them at most welding supply stores. they may be called a surface conditioning pad.

CSaddict · « **Reply #15 on:** July 24, 2009, 02:30:57 PM »

Quote from: turbob16hatch on July 24, 2009, 11:44:05 AM

red scotch brite pad on a angle grinder is your friend for nice looking pipes.

you can get them at most welding supply stores. they may be called a surface conditioning pad.

hmm I have a whole box of those...

turbob16hatch · « **Reply #16 on:** July 24, 2009, 03:29:20 PM »

how long have they been lasting for you? i seem to only get 5-6 bends out of mine before the edge is gone and there worthless.

CSaddict · « **Reply #17 on:** July 24, 2009, 05:15:43 PM »

I dont use them for that. I use them for other things, but they dont last long.

t_cel_t · « **Reply #18 on:** July 25, 2009, 03:36:57 AM »

get a cheap ass tumbler, i think i saw one at harbor freight last time

darkelvis · « **Reply #19 on:** August 06, 2009, 07:50:27 PM »

Quote from: Toysrme on April 12, 2009, 12:29:08 AM

1) absolutely horrible gas coverage
2) you somehow managed to burn some the stainless up at a piss ant 30-40amps worth of welding current - because you travel SO FUCKING SLOWLY trying to make "pretty welds".

Get your head down in the god damned part where you can see, use proper gas coverage, currents and travel speeds.

says the best fabricator ever who makes such amazing products such as this....

God you are a fucking faggot.

darkelvis · « **Reply #20 on:** August 06, 2009, 07:52:06 PM »

oh, and Matt....I was in your shop the other day, I've seen the shit you have just sittin around...POST MORE PICS OF YOUR WORK!

turbob16hatch · « **Reply #21 on:** August 06, 2009, 08:41:21 PM »

i hate posting picture with my shit point and shoot. doesn't show any detail.

oh and laziness doesn't help.

Corey · « **Reply #22 on:** August 07, 2009, 04:45:04 AM »

i love how toysrme can come and run his mouth about everyone elses shit but all he can post if a few pictures of pipe welds he did at school with equipment that practically does the work for you.

the work looks good. honda tech loves colorful welds. if toyrme built that manifold the welds would be gold and silver though with no color because hes pretty much the sickest welder ever. you should take his advice.

turbob16hatch · « **Reply #23 on:** August 07, 2009, 06:20:15 AM »

i have never said toys can't weld the guy is good. i also have asked for advice,(earlier in thread). but i'm to the point i know what i'm doing for the most part and could very well make a manifold have no color what so ever. and be 100% silver.

but that is not what my customers want. and i think we agree on color sells.

but honestly i was disappointing that he bashed me so hard when i had a different name( was corrected thanks mods). and then a quickly as he came he disappeared. So........

yeah that was weird.

but i think corey, csaddict you guys need to post up more, as do i. i have mainly been waiting to finish a few big projects that will be killer when done but are less then impressive part way through.

CSaddict · « **Reply #24 on:** August 07, 2009, 06:27:06 AM »

I haven't made a manifold in a while. I usually just do the work for the local speed shop. Custom exhaust, charge pipes, blah blah blah.

Teg2boo · « **Reply #25 on:** August 07, 2009, 10:46:11 AM »

You should learn from my welding skills.

I'm the best welder ever.

Look at this colorful weld!

Passenger · « **Reply #26 on:** August 09, 2009, 06:47:49 PM »

Toysrme, lacks experience, and tact.

CSaddict · « **Reply #27 on:** August 09, 2009, 07:51:24 PM »

Quote from: Passenger on August 09, 2009, 06:47:49 PM

Toysrme, lacks experience, and tact.

pwned.

onlyflash944 · « **Reply #28 on:** August 09, 2009, 09:51:28 PM »

nice welds. the only thing I don't like about that manifold is the angle the collector meets teh flange

turbob16hatch · « **Reply #29 on:** August 09, 2009, 11:09:09 PM »

i hear ya, i don't think it will effect performance any, but i can see how it could look off a bit.

News:

Author Topic: d series mini-ram (Read 20723 times)