Topic: my new barbie car! (Read 17375 times)

jarebear667 · « **on:** September 25, 2010, 04:23:29 PM »

just picked this car up, fucking love it,
has the inlinepro street kit with 900 high impedence injectors and a gt35r
inlinepro rear end kit with the 300zx non turbo rear diff
twin disk clutch and a bunch of nice extras
only thing that sucks is i didnt get the hardtop but i know where a couple are, and hoping to get one by this spring,
currently making 500@20
i want to get a 6262 for it and i heard they are coming out with some id1600's and get some e85 loving.

thats it flame on fuckers

jay · « **Reply #1 on:** September 25, 2010, 04:25:31 PM »

how many more threads are you going to make?

kill yourself.

jarebear667 · « **Reply #2 on:** September 25, 2010, 04:36:39 PM »

that was just a general question of the clutch, i might make a couple more i haven't decided yet.
this one has pictures in it the other had a link is all. send me a rope.

ratcityrex · « **Reply #3 on:** September 25, 2010, 04:40:18 PM »

FAP FAP FAP FAP FAP FAP FAP FAP FAP.

Man I want a boosted s2000 so bad.

SloS13 · « **Reply #4 on:** September 25, 2010, 06:18:49 PM »

Quote from: ratcityrex on September 25, 2010, 04:40:18 PM

Man I want a boosted s2000 so bad.

me too :yes:

turbohf · « **Reply #5 on:** September 25, 2010, 06:34:25 PM »

think my buddy has one of those turbos. or something similar... ill get the info from him again...

jarebear667 · « **Reply #6 on:** September 25, 2010, 06:45:02 PM »

i think the billet wheeled 6262 would be a good match for the high rpm 2.0, its a fucking blast to drive it likes to kick the ass out way too much,and i like that i dont have to worry a lot about the rear end blowing its guts all over the road. only real reason i bought the car and for only 3-4 k over book with everything thats done! i couldnt pass it up. i will get some rippers in it sooon!
get my girl to take it haha,

colt45 · « **Reply #7 on:** September 25, 2010, 08:34:58 PM »

rag top?

fucking faggot

SgtB · « **Reply #8 on:** September 25, 2010, 08:43:57 PM »

Sweet. Hardtop's are getting scarce now that they aren't making them anymore. Scoop one up when you can.

bigdaddyvtec · « **Reply #9 on:** September 25, 2010, 08:57:25 PM »

cum on barbie lets go party oh oh oh ohhhhhhhhhhhhhhh

Urban Indian · « **Reply #10 on:** September 25, 2010, 09:18:32 PM »

I like it

highroller54 · « **Reply #11 on:** September 25, 2010, 09:25:11 PM »

whats the 6262 do that the 35r doesn't?

Jorsher · « **Reply #12 on:** September 25, 2010, 09:25:55 PM »

I'm jealous.

dvst8r · « **Reply #13 on:** September 25, 2010, 09:35:09 PM »

Quote from: highroller54 on September 25, 2010, 09:25:11 PM

whats the 6262 do that the 35r doesn't?

Move more air.

However not significantly enough imho to be worth the $$$ to go from a GT35R to a 6262.

highroller54 · « **Reply #14 on:** September 25, 2010, 09:37:03 PM »

spool quicker or slower?

turbohf · « **Reply #15 on:** September 25, 2010, 09:56:31 PM »

Quote from: jarebear667 on September 25, 2010, 06:45:02 PM

i think the billet wheeled 6262 would be a good match for the high rpm 2.0, its a fucking blast to drive it likes to kick the ass out way too much,and i like that i dont have to worry a lot about the rear end blowing its guts all over the road. only real reason i bought the car and for only 3-4 k over book with everything thats done! i couldnt pass it up. i will get some rippers in it sooon!
get my girl to take it haha,

he has a 6162 ball bearing, non-billet, but will make 700hp... less than 3k miles, $800...

LS1pwNzJ00 · « **Reply #16 on:** September 25, 2010, 10:44:48 PM »

I dont love how s2k's look, but they look decent. Stock/NA they are SLOW AS FUCKING SHIT, feels like you're riding a 250 with spiker on the back. If it just had about 350-400rwhp it would be a perfect dd. I will say that they do handle something fucking amazing.

lsone_chevelle · « **Reply #17 on:** September 26, 2010, 05:06:10 AM »

how much you pay for it? i curious as to what something like that runs for.

Teg2boo · « **Reply #18 on:** September 26, 2010, 10:36:34 AM »

I hate you and your good looking car.

jarebear667 · « **Reply #19 on:** September 26, 2010, 11:40:52 AM »

well im not sure when im going to switch up turbos i might go with the 6762 but idk this is enough for right now,

Quote from: colt45 on September 25, 2010, 08:34:58 PM

rag top?

fucking faggot

yes for now the fucking hardtops are expensive as fuck and hard to find you can still buy up the last ones produced for like 3400 brand new not painted im sure. i know wehre there are a couple im going to look at, or else there is a lot of aftermarket options but they fit like fuck.

i paid 15000 he was asking 20k this spring but he would never get it, i put more money into my 525whp h22 hatch. so fuck it and the bitches like :yes:

as for just buying an s2000 you can get them for like 9000 with like 100k on them but well taken care of.and put a rhmt turbo kit on one, cast manifolds are cheap.

iand i got some MTdrag radials and will be going to the track later this month and pulling some 11's i hope

mind you i havnt been to the track in about 2 years and have never launched a rear wheel drive car.

92CXyD · « **Reply #20 on:** September 26, 2010, 03:16:56 PM »

Don't the S2k diffs. break easy?

Love the look of the car and the setup looks nice.

In my neck of the wood I can drive one of those 4-6mo. out of the year. $:-\$

jarebear667 · « **Reply #21 on:** September 26, 2010, 05:39:20 PM »

i has the r200 inlinepro differential kit no problems there sir, and i can drive it until novemberish. and start in aprilish i wont driver her in snow.
i want to know if they are going to come out with 1600cc id injectors...

colt45 · « **Reply #22 on:** September 26, 2010, 08:57:02 PM »

im just talking shit jare, that car is awesome, and i want one too

dvst8r · « **Reply #23 on:** September 26, 2010, 09:43:35 PM »

Quote from: jarebear667 on September 26, 2010, 05:39:20 PM

...i want to know if they are going to come out with 1600cc id injectors...

Why? They already have 2000's

Spanish-rice · « **Reply #24 on:** September 26, 2010, 10:06:06 PM »

i just sold my silverstone S2000 on saturday and the guy didnt want the hardtop. ive got all the hardtop and all the hardware for it if youd be interested you can shoot me an offer. and thanks for posting pictures of your beautiful car the day after i sold mine and making me regret it

jarebear667 · « **Reply #25 on:** October 04, 2010, 06:10:07 PM »

went to a fun ass cruise this weekend didnt get too much footage or piocs but there were 1500 cars on the cruise with a show after it was a good time!
it was called cruise to the woods its a pretty big deal here in iowa lol

car in front makes some serious power my friends talon right at the 500mark now on a 6262
wish i had a vid of him launchin this thing in front of all the people with all the popping and banging and 4 wheel burn outs!

getting started

rolling em over

real real dirty 2nds at 9000 rpm
when i came around that corner people were like oh this should be funny and after i sat there for about 30 seconds just smoking them they were all cheering like crazy!

there might be a vid up on youtube sometime of some of the burn outs at this turn but i hope the one is up of the mustang that slid into the ditch hahaha

SgtB · « **Reply #26 on:** October 04, 2010, 08:47:38 PM »

Bad ass. I found out that the CR has the hardtop as a standard item so it will be available as long as honda is required to offer replacement parts.

runsfromdacops · « **Reply #27 on:** October 04, 2010, 09:40:12 PM »

some good smoke on them bitchs. its nice to see a s2k that can do a burn out with out shiting the diff.

jarebear667 · « **Reply #28 on:** October 04, 2010, 10:05:39 PM »

i fucking love it

mycarslow · « **Reply #29 on:** October 04, 2010, 10:21:20 PM »

was it emory in the ditch ??

News:

Author Topic: my new barbie car! (Read 17375 times)