Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 45793 times)

chris · « **Reply #90 on:** September 29, 2009, 09:09:11 PM »

Everything I have touched for b series always gets ctr cams since it never seemed worth it watching all these very pricey builds going down the drain from cam failure.

Ill agree with the not on web forums builds. Some of the nastiest k series stuff will never be seen on the interwebs.

Joseph Davis · « **Reply #91 on:** September 29, 2009, 09:13:15 PM »

Quote from: chris M on September 29, 2009, 08:51:41 PM

So when was the last time hands on people have seen crower cams fail? Obviously we have 2 cases here on the board.

I've only seen a Gude failure, but it was an older SOHC and the owner might have run it low on oil. Travis Grimm broke an early set of Pro2's. Never seen a Crower break outside of the forums... but I've never seen a Crower B-VTEC cam ever. I have seen 20+ sets of Crower 402, 402T, 403, 404 as well as five Crower stage 2 turbo and a single Crower stage 2 NA. All great cams.

hatchbox90 · « **Reply #92 on:** September 29, 2009, 09:38:13 PM »

Quote from: Joseph Davis on September 29, 2009, 09:13:15 PM

Quote from: chris M on September 29, 2009, 08:51:41 PM
So when was the last time hands on people have seen crower cams fail? Obviously we have 2 cases here on the board.

I've only seen a Gude failure, but it was an older SOHC and the owner might have run it low on oil. Travis Grimm broke an early set of Pro2's. Never seen a Crower break outside of the forums... but I've never seen a Crower B-VTEC cam ever. I have seen 20+ sets of Crower 402, 402T, 403, 404 as well as five Crower stage 2 turbo and a single Crower stage 2 NA. All great cams.

Ill take pics for you when they get here

ryan89crx · « **Reply #93 on:** September 30, 2009, 08:25:44 PM »

too bad i get pissed off for you Justin. searching Google today i came across a few threads that had the same problem, and Crower replaced their cams as well as the fucked valves free of charge...but not you

chris · « **Reply #94 on:** September 30, 2009, 08:29:54 PM »

how old were the threads? The had alot break back in the day

ryan89crx · « **Reply #95 on:** September 30, 2009, 09:15:40 PM »

Quote from: chris M on September 30, 2009, 08:29:54 PM

how old were the threads? The had alot break back in the day

ya i dont know, i was on my phone and never bothered to look at the thread dates

hatchbox90 · « **Reply #96 on:** September 30, 2009, 10:10:12 PM »

no worries, I think those cams were a couple years old and were raped to shit also. I think my cams came today but nobody was here to sign for them

or maybe a box full of ecus from jd

Teg2boo · « **Reply #97 on:** September 30, 2009, 10:31:31 PM »

Quote from: Joseph Davis on September 29, 2009, 09:13:15 PM

Quote from: chris M on September 29, 2009, 08:51:41 PM
So when was the last time hands on people have seen crower cams fail? Obviously we have 2 cases here on the board.

I've only seen a Gude failure, but it was an older SOHC and the owner might have run it low on oil. Travis Grimm broke an early set of Pro2's. Never seen a Crower break outside of the forums... but I've never seen a Crower B-VTEC cam ever. I have seen 20+ sets of Crower 402, 402T, 403, 404 as well as five Crower stage 2 turbo and a single Crower stage 2 NA. All great cams.

Happy to hear that, I was about to throw them in the garbage

Joseph Davis · « **Reply #98 on:** October 01, 2009, 05:35:33 AM »

Quote from: Teg2boo on September 30, 2009, 10:31:31 PM

Quote from: Joseph Davis on September 29, 2009, 09:13:15 PM
Quote from: chris M on September 29, 2009, 08:51:41 PM
So when was the last time hands on people have seen crower cams fail? Obviously we have 2 cases here on the board.

I've only seen a Gude failure, but it was an older SOHC and the owner might have run it low on oil. Travis Grimm broke an early set of Pro2's. Never seen a Crower break outside of the forums... but I've never seen a Crower B-VTEC cam ever. I have seen 20+ sets of Crower 402, 402T, 403, 404 as well as five Crower stage 2 turbo and a single Crower stage 2 NA. All great cams.

Happy to hear that, I was about to throw them in the garbage

O wait, I take it back those things suck. You better send them to me for proper disposal as they can contaminate everything the come in contact with.

Teg2boo · « **Reply #99 on:** October 01, 2009, 12:24:52 PM »

I have these: http://www.crower.com/cgi-bin/detail.cgi?prod_id=62402T-2

Pay shipping and they are yours. I don't want to be contaminated.

ratcityrex · « **Reply #100 on:** October 01, 2009, 01:50:48 PM »

Quote from: Teg2boo on October 01, 2009, 12:24:52 PM

I have these: http://www.crower.com/cgi-bin/detail.cgi?prod_id=62402T-2

Pay shipping and they are yours. I don't want to be contaminated.

If jd dosent jump on it I will!! LMK

Joseph Davis · « **Reply #101 on:** October 01, 2009, 01:53:05 PM »

I already Paypaled him.

ratcityrex · « **Reply #102 on:** October 01, 2009, 02:14:04 PM »

I figured as much. Great deal.

Teg2boo · « **Reply #103 on:** October 01, 2009, 02:24:17 PM »

Sold to JD, I'll ship them tomorrow. You should receive the package mid next week I guess.

Holset151 · « **Reply #104 on:** October 16, 2009, 02:23:44 AM »

What is the trim on that turbo?

DRQPQUT · « **Reply #105 on:** November 29, 2009, 09:05:29 PM »

nice build thread!! i hope you didnt pay for it ,what he told me he would sell it to me for..he wanted a arm and a leg for it 6 months ago...leed tuned should be fun. glad that car went to a good home dirty 3rds to be had....what day are you guys tuning are you using 8velocity dyno??

88dx · « **Reply #106 on:** November 29, 2009, 09:28:27 PM »

So who owns this now

DRQPQUT · « **Reply #107 on:** November 30, 2009, 12:48:25 AM »

Quote from: 88dx on November 29, 2009, 09:28:27 PM

So who owns this now

?

ryan89crx · « **Reply #108 on:** November 30, 2009, 02:11:21 PM »

Quote from: 88dx on November 29, 2009, 09:28:27 PM

So who owns this now

the OP still does

We are swapping the EMS from Crome to ECtune and street tuning a bit before he heads up to see Leed

hatchbox90 · « **Reply #109 on:** November 30, 2009, 09:03:08 PM »

Quote from: DRQPQUT on November 29, 2009, 09:05:29 PM

nice build thread!! i hope you didnt pay for it ,what he told me he would sell it to me for..he wanted a arm and a leg for it 6 months ago...leed tuned should be fun. glad that car went to a good home dirty 3rds to be had....what day are you guys tuning are you using 8velocity dyno??

Yea i payed for it, too much IMO but i think it was worth it. Registered and all so i dont have to TRY to attempt or even bother, i get some people looking at me with the stink eye and then i get some older chineese guys that give me thumbs up.

Reading a post the other day on ht about some guy wanting to do a conversion and people were making all sorts of retaqrded remarks.

Dump tube is geting re routed this weekend (caugh caugh) to exit out passanger tire area. Still need to get some part throttle stuff done because im rich as hell cruising.

boosted 00 black si · « **Reply #110 on:** December 01, 2009, 06:13:37 PM »

News:

Author Topic: My turbo setup (broken cams pics added 6/7 pg 2) (Read 45793 times)

chris

chris