Topic: Malichite Daily CRX (Read 31788 times)

jdmhatchracer94 · « **Reply #30 on:** December 20, 2011, 04:02:10 AM »

anything new??

malichite · « **Reply #31 on:** December 21, 2011, 12:36:02 PM »

Got it running a couple weeks ago. Wiring is just laying all over right now. Wanted to make sure it all worked before I started cutting in. Been busy with holiday and new born shit. Hope to get back on it next week. Have most the week off. As far as remaining work, the outside of the car still needs paint, still need to assemble the front suspension. Need to buy brakes for the front. Not sure if I am going to go fastbrakes or just cobble some shit together, or go stock crx stuff.

Also ordered a Wier traction bar kit so I am hoping that will show up soon. Depends on how fast canada post goes I guess.

malichite · « **Reply #32 on:** December 21, 2011, 02:27:10 PM »

Forgot. I also need to figure out springs and shocks situation. Thinking I might just go with the Tokico Blues and Tokico Springs for now. Had them on an old hatch and they were pretty nice for a daily. Will see. Money is adding up quick and this

is going broke!

ratcityrex · « **Reply #33 on:** December 21, 2011, 02:46:25 PM »

Ex knuckles, mini cooper rotors, and legend calipers and brackets.

malichite · « **Reply #34 on:** December 21, 2011, 02:49:57 PM »

You have EX knuckles??? I just finished putting fresh ball joints and wheel bearings in the stockers. Hmm, I should take a look at making my own brakets to adapt the legend calipers. I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.

92CXyD · « **Reply #35 on:** December 21, 2011, 03:09:50 PM »

Quote from: malichite on December 21, 2011, 02:49:57 PM

I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.

If ya find out for sure, post up I'm interested.

On my '88 CRX Si can I put the mini cooper rotors and legend calipers? Or do I still need adapters?

ratcityrex · « **Reply #36 on:** December 21, 2011, 05:06:22 PM »

Quote from: malichite on December 21, 2011, 02:49:57 PM

You have EX knuckles???

No I dont, But I do have those upper ball joints for a crx, lower ball joints for a da, and those wheel bearings for a da still int he box that I gave to you.

Quote from: 92CXyD on December 21, 2011, 03:09:50 PM

Quote from: malichite on December 21, 2011, 02:49:57 PM
I may look at doing the 03 CL calipers on. Supposedly they fit the dx knuckles.

If ya find out for sure, post up I'm interested.

On my '88 CRX Si can I put the mini cooper rotors and legend calipers? Or do I still need adapters?

Has to be the hubs that are for the 10.xx" rotors. Like ex/da/dc/eg....ect

As far as the CL calipers I have no idea

jdmhatchracer94 · « **Reply #37 on:** December 22, 2011, 12:26:32 AM »

best upgrade I did was a da booster and mc thats all.

HiProfile · « **Reply #38 on:** December 22, 2011, 12:00:20 PM »

If you have 9.4" knuckles, you can use ITR/Legend calipers & brackets with 10.3" civic rotors.

I'd like to hear more about the mini cooper rotors tho.

ratcityrex · « **Reply #39 on:** December 22, 2011, 12:30:31 PM »

Quote from: HiProfile on December 22, 2011, 12:00:20 PM

I'd like to hear more about the mini cooper rotors tho.

Ask and you shall receive

http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html

malichite · « **Reply #40 on:** December 27, 2011, 11:32:52 PM »

More work on the wiring harness today. Not done yet but getting close.

ratcityrex · « **Reply #41 on:** December 27, 2011, 11:36:15 PM »

looks good!!

jdmhatchracer94 · « **Reply #42 on:** December 28, 2011, 12:06:52 AM »

lookin better every pic

malichite · « **Reply #43 on:** January 10, 2012, 04:13:09 PM »

Still fucking wiring. I cant wait to finish this part!

JACER63 · « **Reply #44 on:** January 17, 2012, 08:19:22 PM »

fucking hate wiring!! keep up the good work,it is looking good though ..

on the brakes aj suggested, i do have some gsr knuckles, hubs,rotors,and calipers.. thats is if it will work for your project needs.

ratcityrex · « **Reply #45 on:** January 17, 2012, 10:40:53 PM »

He text me some pics last night. Engine wiring harness is done. Just needs to finish up the resistor box. And then do the headlights and all that shit.

jdmhatchracer94 · « **Reply #46 on:** January 17, 2012, 11:04:36 PM »

can't wait to see it

malichite · « **Reply #47 on:** January 22, 2012, 10:45:55 PM »

Got some more work done over the last few days. Finished up the engine wiring harness and got i all hooked up. Hooked up a battery temporarily and she fired up first try so big win there. Also started putting the interior together a little but it is hard to tell. Slowly putting all the wiring back in place and fixing little bits here and there. Also got the new heater core put in and all the blower assembly back in. Lastly, got the new valve cover cleaned up and painted. Next steps are to finish getting the dash put in. Mount the steering rack, come up with some type of cooling system and final install suspension and brakes. Lastly will be paint for the outside.

Engine Harness

Inside Shot of the engine harness

Still a big ass mess

All wired up in running form. Still need to make permanent grounds.

crxvtec91 · « **Reply #48 on:** January 23, 2012, 12:05:47 AM »

Do work!

jdmhatchracer94 · « **Reply #49 on:** January 23, 2012, 12:49:09 AM »

awsome

turbohf · « **Reply #50 on:** January 23, 2012, 12:58:46 AM »

looks like that needs some cams and a ported intake manifold....

btw. i have those forsale.

malichite · « **Reply #51 on:** January 23, 2012, 12:59:54 AM »

Quote from: turbohf on January 23, 2012, 12:58:46 AM

looks like that needs some cams and a ported intake manifold....

btw. i have those forsale.

Fuck, I would love to pick them up from you. Just dont have coin right now

Still need to buy springs, shocks and brakes for this bitch, plus my first day care bill is due next week.

turbohf · « **Reply #52 on:** January 23, 2012, 01:01:52 AM »

Quote from: malichite on January 23, 2012, 12:59:54 AM

Quote from: turbohf on January 23, 2012, 12:58:46 AM
looks like that needs some cams and a ported intake manifold....

btw. i have those forsale.

Fuck, I would love to pick them up from you. Just dont have coin right now Still need to buy springs, shocks and brakes for this bitch, plus my first day care bill is due next week.

that didnt have an A6 swap in it by chance? i need a D16A6 for my CRX...

malichite · « **Reply #53 on:** January 23, 2012, 01:20:23 AM »

No, but I have an A6 short block that needs a rebuild. Also have a complete d15 with mpfi shits in it. Could probably piece something together.

HiProfile · « **Reply #54 on:** January 23, 2012, 10:56:42 AM »

OBD2 VC and OBD0 IM? Please tell me you're just waiting on a chris m ported IM and bored TB...

In any case, looks good so far.

Towdogg · « **Reply #55 on:** January 23, 2012, 12:23:56 PM »

Quote from: ratcityrex on December 22, 2011, 12:30:31 PM

Quote from: HiProfile on December 22, 2011, 12:00:20 PM
I'd like to hear more about the mini cooper rotors tho.

Ask and you shall receive

http://www.team-integra.net/forum/19-projects-diy-article-talk/209631-diy-no-bs-bolt-big-brakes-rs-gs-ls-gsr.html

Ratcity... Have you done this to your car?

ratcityrex · « **Reply #56 on:** January 23, 2012, 12:28:44 PM »

Not yet. In the next month or two I'm gona give it a shot. Worst that can happen is it don't fit and I return the rotor back to the auto parts store. I already have the caliper and brackets.

malichite · « **Reply #57 on:** January 26, 2012, 12:53:28 PM »

Ok, looking at springs and shocks now. Tokico Blues and Tokico Springs, or Skank 2 Shocks and springs...probably not coil overs though. This will be a daily so I want something comfy. I know to tokicos are really nice, but may be willing to look at others.

http://store.skunk2.com/suspension-tuning/sport-shocks.html

ratcityrex · « **Reply #58 on:** January 26, 2012, 01:22:47 PM »

I wouldn't go with the skank9 suspension stuff. Ive "HEARD"

that its total crap.

Edit: After looking at them they look like kyb gr2's

malichite · « **Reply #59 on:** January 26, 2012, 04:08:13 PM »

Yeah, kind of forgot about the GR2s also. Toss those on the list

News:

Author Topic: Malichite Daily CRX (Read 31788 times)