Topic: Small Block Chevy Single Turbo Build (Read 62132 times)

carkrazed · « **on:** February 21, 2012, 09:32:46 PM »

Figured I'd throw this in fab since that's 90% of this build.

Car is a 65 Nova. Kinda hard to get a good pic of it. Too much shit in the shop.

The owner, lol

Motor is a fresh 358 with Eagle crank, rods and JE pistons.ARP main studs, head studs etc. Its gonna be running Megasquirt 2 with wasted spark.

Still need to paint it and get rid of that orange.

Ebay manifolds with some v-bands welded on.

Fabbing up an efi manifold for it. I'm also using this car for my senior project which is tunable PWM water/meth injection.

We have three days scheduled to get a good tune on the car then do testing on the water/meth injection starting sat march 31st, so this is gonna move pretty quickly.

Random Hero · « **Reply #1 on:** February 21, 2012, 11:41:05 PM »

Awesome. I'm in.

Passenger · « **Reply #2 on:** February 22, 2012, 12:20:17 AM »

Sweet, Novas are one of the muscle cars I've always liked.

How do you keep chips off the tool setter? Or do you just use it for initial length register (you would obviously be able to keep it clean then) and not for tool life management?

patsmx5 · « **Reply #3 on:** February 22, 2012, 12:44:21 AM »

badass!

Only recommendation is to go MS3X. I've used MS3X and MS2E, MS3X is 10X better. if it's the owners decision, tell him it's worth the extra money even on a budget ass build. I have a perfectly good working MS2E on the miata and REALLy want to ~~fuck it up~~ change it to MS3X

Passenger · « **Reply #4 on:** February 22, 2012, 12:57:09 AM »

Quote from: carkrazed on February 22, 2012, 12:37:47 AM

I have never used the probe. Probably cause I don't know how, lol. When I change a tool out, I indicate it the old fashioned way. Is it supposed to covered or something?

Balls dude. Tool touch probes are so much faster, more accurate/repeatable.

Yeah mine are all covered, I'll try to snap a couple pictures.

bigdaddyvtec · « **Reply #5 on:** February 22, 2012, 04:05:55 AM »

FUCK FUCK FUCK FUCK... HELLA JELY!!! 67 is my fav, 64-5 next best AWESOME dude!

Ntrain2k · « **Reply #6 on:** February 22, 2012, 07:36:22 AM »

fapworthy

weirtech · « **Reply #7 on:** February 22, 2012, 09:39:23 AM »

i wish i had a cnc mill.

CSaddict · « **Reply #8 on:** February 22, 2012, 05:38:12 PM »

Stickied!!!!

Passenger · « **Reply #9 on:** February 22, 2012, 05:51:29 PM »

Here are a couple pics of my tool probe on my hmc:

Once you use a tool setter you never go back. If you need any help figuring it out I'm sure I could help.

Towdogg · « **Reply #10 on:** February 22, 2012, 08:35:06 PM »

Where's the turbo?

snm95ls · « **Reply #11 on:** February 22, 2012, 10:33:21 PM »

Yep, I'm jelly.

Are you doing anything with the cheesedick front subframe setup?

snm95ls · « **Reply #12 on:** February 22, 2012, 10:51:17 PM »

Quote from: carkrazed on February 22, 2012, 10:44:13 PM

Quote from: snm95ls on February 22, 2012, 10:33:21 PM
Yep, I'm jelly.

Are you doing anything with the cheesedick front subframe setup?

Ya, were swapping in a modified 72 front end with a custom rack setup. Probably not the most common front end swap for these but we had it laying around and decided to use it.

Heh, that ought to be interesting. I'd love to see pics when you guys do that.

highroller54 · « **Reply #13 on:** February 23, 2012, 01:26:01 AM »

Quote from: Passenger on February 22, 2012, 12:20:17 AM

Sweet, Novas are one of the muscle cars I've always liked.

If by nova's you mean chevy 2'S I agree 100%

bigdaddyvtec · « **Reply #14 on:** February 23, 2012, 05:11:35 PM »

Fucking sick dude

Cadracer · « **Reply #15 on:** February 24, 2012, 01:29:01 AM »

Sounds great im glad someone else is doing a sbc turbo setup. I am wondering if your doing a single or twin? Also why are you gonna use methenal injection if your gonna be fuel injected? My 650 holley read like a fuel injected car on the wide band as i did my blowthrou setup. Do you know what your gonna do for traction because the turbos enhance the torque down low so those tires will fry even easier. I have so much info on my builds i would have to start my own thread for my builds.The turbo 305 and the caddy will be all up and runnning this year. I see you are running old school fuelies? I have questions on camshaft and what block work has been done? Whats the projected hp rating? If you have any questions send me a pm. Awesome work

PhilStubbs · « **Reply #16 on:** February 27, 2012, 07:06:22 PM »

this will be cool. my dad has a 65 4 door with 230 inline 6. i have been trying to talk him into turboing it rather than a 300hp 350. thats what he wants, but right after that says he wants something different. 99% of them have 300hp 350's. any retard can do that.

DasPoop · « **Reply #17 on:** February 27, 2012, 07:14:06 PM »

Quote from: SecksyPeePee on February 27, 2012, 07:06:22 PM

this will be cool. my dad has a 65 4 door with 230 inline 6. i have been trying to talk him into turboing it rather than a 300hp 350. thats what he wants, but right after that says he wants something different. 99% of them have 300hp 350's. any retard can do that.

A turbo straight six? Fantastic

crxvtec91 · « **Reply #18 on:** February 28, 2012, 10:23:05 AM »

Damn that looks good!

civiceggturbo · « **Reply #19 on:** February 28, 2012, 10:22:07 PM »

tool setters are over rated, just another thing to get abused

Faster to use a macro program to write the offset in using a block. The hell with guessing how far tools are sticking out to run the tool setter program, especially when setting fifty some tools back to back. However I could see using it if you used alot of regrinds to measure the diameter tho

Passenger · « **Reply #20 on:** February 29, 2012, 05:35:12 PM »

Quote from: civiceggturbo on February 28, 2012, 10:22:07 PM

tool setters are over rated, just another thing to get abused

Faster to use a macro program to write the offset in using a block. The hell with guessing how far tools are sticking out to run the tool setter program, especially when setting fifty some tools back to back. However I could see using it if you used alot of regrinds to measure the diameter tho

Bull shit. Why are you guessing your tool length? Even manually a tool eye is more repeatable and faster.

civiceggturbo · « **Reply #21 on:** February 29, 2012, 08:50:17 PM »

The Rienshaw tool setter that I have used requires you to give an approximate length before you run the tool setting program, this way it rapids a few inches above the tool setter, feeds down twice and writes the offset. Compared to writing a macro program using a unused g function "G14" for example, just about every machine that is in my work has the macro loaded and you just call up G14 in MDI, it writes the offset retracts the head and changes to the next tool. I have no problem settings tools within .0001 all day long off a 1-2-3 block.

rawr · « **Reply #22 on:** February 29, 2012, 10:46:33 PM »

If the block is calibrated to 1 tenthousandth your tool isn't going to set to that every time .0005 is about as low as I'd measure for sure before you start to get strange shit fucking with your numbers.