Topic: I need a custom manifold in CONNECTICUT! civic EF!!! (Read 25722 times)

4door89 · « **on:** June 05, 2012, 08:33:26 PM »

I'm doing a custom turbo location in me EF and need a manifold made to order.

I'm looking for quality work, and willing to pay for it.

Pics of the setup...

Ntrain2k · « **Reply #1 on:** June 05, 2012, 08:41:18 PM »

http://www.realhomemadeturbo.com/forum/index.php/topic,25.0.html

Look there, learn, follow example.

You might get some advice then.

4door89 · « **Reply #2 on:** June 05, 2012, 09:00:22 PM »

Sorry, i forgot guys...

4door89 · « **Reply #3 on:** June 05, 2012, 09:02:08 PM »

I was on this site years ago.

4door89 · « **Reply #4 on:** June 05, 2012, 09:14:33 PM »

rawr · « **Reply #5 on:** June 05, 2012, 10:14:58 PM »

I see why you might want your turbo there to make your charge pipe routing easier, but that seems like it would turn the manifold into a mess.

Short ram ftw?

Also normal porn pls.

malichite · « **Reply #6 on:** June 05, 2012, 11:08:51 PM »

Thats a cute little turbo. Why the cluster fuck "custom" shit to get that little thing all the way down there? Your lack of porn upsets me by the way! One fat chicks tits porn do not equal.

crxvtec91 · « **Reply #7 on:** June 06, 2012, 09:37:36 AM »

CoryR and Csaddict are the CT fab nogs, BUT i havent seen coryR post in forever and David doesnt do to much fab work now a days.

92CXyD · « **Reply #8 on:** June 06, 2012, 09:48:09 AM »

Quote from: crxvtec91 on June 06, 2012, 09:37:36 AM

CoryR and Csaddict are the CT fab nogs, BUT i havent seen coryR post in forever and David doesnt do to much fab work now a days.

Hotrex is another in your area

4door89 · « **Reply #9 on:** June 06, 2012, 08:35:42 PM »

Quote from: malichite on June 05, 2012, 11:08:51 PM

Thats a cute little turbo. Why the cluster fuck "custom" shit to get that little thing all the way down there? Your lack of porn upsets me by the way! One fat chicks tits porn do not equal.

Long story short, I'm an asshole and thought a custom radiator and support would be a cool idea.

That turbo should be good for a reliable 400+ and that's what I'm looking for out of this setup.

And please excuse my selection of porn. I was high as fuck when I posted and thought it would be funny. I apologize for my crimes against humanity.

dvst8r · « **Reply #10 on:** June 06, 2012, 09:48:37 PM »

PM hotrex, he should have something for you.

malichite · « **Reply #11 on:** June 06, 2012, 09:50:36 PM »

That is a pretty slick radiator. What did it come from?

4door89 · « **Reply #12 on:** June 06, 2012, 10:05:56 PM »

It's a volks scirocco core with custom endtanks. Dual pass

DasPoop · « **Reply #13 on:** June 07, 2012, 12:20:58 AM »

i vote hf manifold with a drop pipe. with all the setups on this site you cant think of anything? seriously now i mean we have such fine manifolds as this

4door89 · « **Reply #14 on:** June 07, 2012, 12:51:50 AM »

Ha. Dat vas un good von.

I'm looking for something just a little classier than that fine piece right there...

jdmhatchracer94 · « **Reply #15 on:** June 07, 2012, 01:42:23 AM »

This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.

turbob16hatch · « **Reply #16 on:** June 07, 2012, 01:51:06 AM »

$250 buy it

ryan89crx · « **Reply #17 on:** June 07, 2012, 02:31:47 PM »

Quote from: jdmhatchracer94 on June 07, 2012, 01:42:23 AM

This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.

A lot of people have forgotten HMT's roots

rawr · « **Reply #18 on:** June 07, 2012, 05:08:52 PM »

Quote from: turbob16hatch on June 07, 2012, 01:51:06 AM

$250 buy it

worth it for 250 then do something else with your rad setup

4door89 · « **Reply #19 on:** June 07, 2012, 09:59:12 PM »

I need something like this...

Its getting to the point that I'm about to start buying some pipe... My only concern is time/material wasted. I need to stop being a pussy...

WOW that's got a clean shave!!!

4door89 · « **Reply #20 on:** June 07, 2012, 10:05:41 PM »

Quote from: ryan89crx on June 07, 2012, 02:31:47 PM

Quote from: jdmhatchracer94 on June 07, 2012, 01:42:23 AM
This is rhmt we dont do fuckin classy. We do cheap and dirty thats what gets it done.
A lot of people have forgotten HMT's roots

I did cheap and dirty already...

I'm trying to be like the Jeffersons...

I'm moving on up bitches...

NoPistons! · « **Reply #21 on:** June 12, 2012, 01:12:24 PM »

Because that manifold is really going to help that small as fuck turbo all legit like?

Buy a mig and some weld els and go for it. Hobart 140 or something. China freight if you're a cheap fuck like i am. Trust me, you will FIND shit to weld with it thus making it pay for itself in no time.

4door89 · « **Reply #22 on:** June 12, 2012, 01:46:22 PM »

The welder is not the problem. This is what I have at home now. I'm the kind of guy that knows when he should bring in experience. Experience = Quality work. To go through all the cost of material, to have it wasted on a stupid rookie mistake on my part is a risk I don't want to take right now.

I've done exhausts and downpipes before with plenty of popcorn for all to enjoy. I want something better for the manifold.

crxvtec91 · « **Reply #23 on:** June 12, 2012, 02:35:39 PM »

You can do as I did, tack weld what you need and get it finish welded by someone else.

4door89 · « **Reply #24 on:** June 12, 2012, 02:54:06 PM »

Ok so I'm gonna buy some sch10 SS els from ace...

Maybe BMC for flanges? I know there's beef...

rawr · « **Reply #25 on:** June 12, 2012, 06:32:44 PM »

just buy mild steel

4door89 · « **Reply #26 on:** June 12, 2012, 06:39:29 PM »

It's cheaper to do SS.

rawr · « **Reply #27 on:** June 12, 2012, 07:04:43 PM »

It is but mild is way fuckin easier to weld

turbob16hatch · « **Reply #28 on:** June 12, 2012, 09:28:14 PM »

Less posting more welding. we don't care what you make shit out of or where you buy the material.

btw, you do realize there are like 50 places that make manifold for hondas right?

4door89 · « **Reply #29 on:** June 12, 2012, 09:39:12 PM »

What filler rod would you guys use to weld a mild flange to 304?

News:

Author Topic: I need a custom manifold in CONNECTICUT! civic EF!!! (Read 25722 times)