:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: cheap sources for reliable threaded hall sensors  (Read 6847 times)

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
cheap sources for reliable threaded hall sensors
« on: June 26, 2012, 09:27:43 PM »
I am ditching my megasquirt and popping for  some sort of other standalone. Possibly a haltech, vipec or link and i want to ditch the ford VR sensor on the crank.

I plan to use a 36-1 toothed crank with a hall sensor and a single magnet hall config on the cam gear for the home signal.  Should I just hit up digikey and pick any hall sensor i want? Do certain hall sensors only read magnets and others teeth? I did some reading but havent found anything to straight forward. 

Thinkng something like these.

http://www.motec.com/sensors/crankcamspeed/
http://www.digikey.com/product-highlights/us/en/hamlin-hall-effect-sensors/280

Apparently the hamlin needs a pullup, I duno if that applies no not MS units. Also looks like the hamlin doesnt work for high rpms on a 36-1 wheel.


Word.
« Last Edit: June 26, 2012, 09:40:18 PM by TTC »
Logged

ryan89crx

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 3228
  • 20lbs of love!
Re: cheap sources for reliable threaded hall sensors
« Reply #1 on: July 03, 2012, 01:54:21 PM »
DIYautotune sells threaded Hall sensors for pretty cheap.
http://www.amazon.com/Hall-Threaded-Crankshaft-Position-Sensor/dp/B007QU0W0K
Logged
d-series on 20 pounds will turn you out!

rawr

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1603
Re: cheap sources for reliable threaded hall sensors
« Reply #2 on: July 04, 2012, 08:54:55 AM »
Hall sensors are like 2 dollars. Can you not put them in some sort of threaded tube and epoxy the ends?
Logged

rawr

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1603
Re: cheap sources for reliable threaded hall sensors
« Reply #3 on: July 04, 2012, 08:59:58 AM »
Logged

Emperor

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 70
Re: cheap sources for reliable threaded hall sensors
« Reply #4 on: July 04, 2012, 10:23:36 AM »
Quote from: rawr on July 04, 2012, 08:54:55 AM
Hall sensors are like 2 dollars. Can you not put them in some sort of threaded tube and epoxy the ends?
yes you can ;DDD

i did it and works great. just tray to get a straight one (ford)

drill out a bolt or something like your anal plug and secure the sensor with abit JBweld or loctite

much cheaper and faster since you can steal everything at the local junkyard :mexi:
Logged
RHMT Boost everything
-Cars
-Bikes
-Trucks -Airplanes -......... and last but not least  YOUR MOM http://www.cslab.ntua.gr/~phib/images/doom/anim/sht2.gif

Minor Threat

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2401
Re: cheap sources for reliable threaded hall sensors
« Reply #5 on: July 05, 2012, 05:11:40 PM »
Tom is a fag and will not do any of this.
Logged
"quotquotand the welds look like a pigeon had 1 too many chili-dogs, whoever built them needs to go throw their tools in the ocean."quotquot

www.facebook.com/enhancedautoperformance

kgx

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 256
  • MR2fag
Re: cheap sources for reliable threaded hall sensors
« Reply #6 on: July 08, 2012, 04:31:18 AM »
Cherry switch does free samples. I requested 1 years ago and they sent me 2.
Logged

TTC

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1786
Re: cheap sources for reliable threaded hall sensors
« Reply #7 on: July 16, 2012, 07:33:49 PM »
Pulling the trigger on an ems this week.
Logged
Pages: [1]   Go Up
« previous next »