:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

BDVT's BroDozzer gets compound twin turbos!... (link)

Pages: 1 [2]   Go Down

Author Topic: K20EH2's Build Thread  (Read 27613 times)

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: K20EH2's Build Thread
« Reply #30 on: July 29, 2012, 09:38:03 PM »
Hx35 will be fine for your power goal and they only come one size. Hx40 comes in multiple sizes
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: K20EH2's Build Thread
« Reply #31 on: August 06, 2012, 04:29:55 PM »
HX35 there is the 7 blade or 8 blade. And the majority of sizing options is in the exhaust housing ar mine is a 12cm. But (AJ) <--- thats me made 434whp on pump on my ls with the hype r head and gsr cams with -12cc comp wiseco pistons (8.5:1 comp) @ 28lbs of boost. Seems like alot but that was on 92 pump. And mine is the 7 blade.



RHMT 434 hp 329 tq LSV 26psi on pump gas [url=http://www.realhomemadeturbo.com]www.realhomemadeturbo.com[/url]
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: K20EH2's Build Thread
« Reply #32 on: August 06, 2012, 04:31:35 PM »
And that was on a smoothed out basemap by the NOG. Still daily driving this beast like that too.
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: K20EH2's Build Thread
« Reply #33 on: August 08, 2012, 10:59:05 AM »
Hx35 is a bad mother fucker! 500hp sohc at 30psi!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

Gold DA9

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1818
  • OG LURKER
Re: K20EH2's Build Thread
« Reply #34 on: August 09, 2012, 10:58:54 AM »
Quote from: crxvtec91 on August 08, 2012, 10:59:05 AM
Hx35 is a bad mother fucker! 500hp sohc at 30psi!

seen this in action and hope to see it again soon.
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: K20EH2's Build Thread
« Reply #35 on: August 09, 2012, 12:55:05 PM »
Quote from: Gold DA9 on August 09, 2012, 10:58:54 AM
Quote from: crxvtec91 on August 08, 2012, 10:59:05 AM
Hx35 is a bad mother fucker! 500hp sohc at 30psi!

seen this in action and hope to see it again soon.

Need spray!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

K20EH2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 14
  • RHMT
Re: K20EH2's Build Thread
« Reply #36 on: October 17, 2012, 06:00:09 AM »
Haven't been here in awhile I actually started working on this POS.

So, I finally took my swap to a friends garage. I removed the stock flywheel, and put my competition ultra lightweight flywheel on with competition stage 4 6 puck. I also replaced the pilot ring and throw out bearing. I put the new OEM Honda Water Pump I had on and adjusted my Hybrid Racing Timing Belt Tensioner. I connected the wiring harness to every sensor available. I put the RBC on for the last time with the Hondata IMG and my Maxbore Throttle Body. Once I go pick up the bolts I need from Honda tomorrow I will be able to finish what I started today and have the swap ready to drop in the car.

I also got rid of the RDX 410s and picked up some Brand New Injector Dynamic 1000cc injectors.

Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: K20EH2's Build Thread
« Reply #37 on: October 17, 2012, 09:32:44 AM »
DO WORK!
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: K20EH2's Build Thread
« Reply #38 on: October 17, 2012, 09:56:53 AM »
Quote from: crxvtec91 on October 17, 2012, 09:32:44 AM
DO WORK!

you should have got hiprofile 900s.... support the community (unless you got the id's from sewell?)
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

K20EH2

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 14
  • RHMT
Re: K20EH2's Build Thread
« Reply #39 on: October 18, 2012, 12:28:58 AM »
Quote from: turbohf on October 17, 2012, 09:56:53 AM
Quote from: crxvtec91 on October 17, 2012, 09:32:44 AM
DO WORK!

you should have got hiprofile 900s.... support the community (unless you got the id's from sewell?)

I have no idea what those are, and I have no idea who that is either. lol
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: K20EH2's Build Thread
« Reply #40 on: October 18, 2012, 11:41:36 AM »
Quote from: K20EH2 on October 17, 2012, 06:00:09 AM
I also got rid of the RDX 410s and picked up some Brand New Injector Dynamic 1000cc injectors.

You obviously haven't looked at my classifieds threads in this forum.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

ratcityrex

  • I Get Blown Daily
  • Global Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 7376
Re: K20EH2's Build Thread
« Reply #41 on: October 18, 2012, 01:00:09 PM »
Quote from: HiProfile on October 18, 2012, 11:41:36 AM
Quote from: K20EH2 on October 17, 2012, 06:00:09 AM
I also got rid of the RDX 410s and picked up some Brand New Injector Dynamic 1000cc injectors.

You obviously haven't looked at my classifieds threads in this forum.

Mad Jewish dealz!! If you still have them in 2 years Ill probably need 8 for a LSx Project....
Logged
New setup is old bottom end with a hype r head with gsr cams. built lsv with hx35 @ 26psi on pump gas
LEED tuned! 434hp/329tq http://www.youtube.com/watch?v=_pbDXZxZdZs
http://www.realhomemadeturbo.com/forum/index.php/topic,16195.0.html

Old Setup B18a1 296hp/289tq LEED Tuned 20psi on pump! http://www.youtube.com/watch?v=2Yj-Z90j4W4   
http://www.realhomemadeturbo.com/forum/index.php/topic,205.msg2437.html#msg2437

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: K20EH2's Build Thread
« Reply #42 on: October 20, 2012, 06:08:15 AM »
I have a couple sizes that will work for LSx, not just 900cc. LSx's usually use a 4bar fuel pressure, so add 15% to an injector's normal flow rating.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

bigdaddyvtec

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8950
  • Go outside and play hide and go fuckyourself
Re: K20EH2's Build Thread
« Reply #43 on: October 20, 2012, 01:02:05 PM »
No turbo... WHJat in the fuck. GO kill yourself. Oh, and fuck your mother. yoou twinkle toed cock twirling faggot
Logged
http://i256.photobucket.com/albums/hh166/joeymisanthropy/Misce/TURBOTHIS.jpg

H series 35 pounds... Will turn you out!
 ---GFI we build FAST---
Pages: 1 [2]   Go Up
« previous next »