Ok well this is my first post and Im a noob at anything that has to do with turbos. But my question is about factory turbo manifolds that can fit Hondas. There has been a heated discussion around town about how you can find a manifold from a factory motor that will fit a d16a6 is there any truth to this or is it just some jackass talkin out his ass?
Noob intro. needed
But since I'm in a good mood, you can use any stock manifold for you engine, make an adapter and bolt the turbo on.
But you may have to run an external oil sump to dump back into engine.
And if you use headers, you may have the turbo soo close to the ground that, you'll probably break it off.
Best thing for cheap on a D-series motor is using a CX/HF exhaust manifold that had a catalytic converter bolted to it.
Then use an adapter plate to get the turbo on then run everything off of that.
Like in this build
http://web.archive.org/web/20021106104744/http://www.homemadeturbo.com/t3.html With this basic info. posted use it to search for more.
Now if you ask anymore questions without a noob post, you may not like the result.