:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Ring gaps D16  (Read 11257 times)

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Ring gaps D16
« on: August 05, 2012, 03:56:52 PM »
HI guys, im building a Z6 w/ P29 pistons. new pistons/rings, gasket blabla, ok, my question is about ring gaps, checked and all are in oem specs, 0.30mm first, not sure if to "open" a bit more , it will be used too for road racing (track days).

Thanks.

Logged

Foowee

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 1816
Re: Ring gaps D16
« Reply #1 on: August 06, 2012, 03:14:10 PM »
A little extra room will not hurt it.  Clearance is room to make power. 
Logged

crxvtec91

  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 8343
  • RIP old hmt. SloS13 for King!!!
Re: Ring gaps D16
« Reply #2 on: August 07, 2012, 03:13:18 PM »
On turbo motors I run .018 top ring, and .019 on the second ring, leave the oil control rings alone.
Logged
My build thread; http://www.realhomemadeturbo.com/forum/index.php?topic=2444.0


I like my girls like I like my cars, rich and retarded.

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6845
  • I look around and all I see is Smegheads
Re: Ring gaps D16
« Reply #3 on: August 07, 2012, 03:52:07 PM »
Quote from: crxvtec91 on August 07, 2012, 03:13:18 PM
On turbo motors I run .018 top ring, and .019 on the second ring, leave the oil control rings alone.

+1  :noel:
Logged

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Ring gaps D16
« Reply #4 on: August 07, 2012, 04:38:48 PM »
this is na  :-*.

i think i will leave it in 0.30mm/ .012
Logged

HiProfile

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 4564
  • Injector Kingpin
Re: Ring gaps D16
« Reply #5 on: August 08, 2012, 12:15:11 AM »
Ring gap should be increased with heat. High compression/timing will want a bit more gap.

A gap that's slightly too large will only loose a cunt hair of power, but mostly just increase blowby. The increased crankcase gasses lead to a slightly shorter oil change interval. A gap that's too small will bind the rings, ruin your ring seal (permanently), and worst case crack rings and even ringlands.
Logged
they mspainted dildoes in my mom'#039#039s hand, in a picture of her in a hospital bed. -JD
dem gurls need some boobz! -Engloid

walter

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2931
Re: Ring gaps D16
« Reply #6 on: August 09, 2012, 03:21:20 PM »
yes, i know that, but important thing is to know how much will expand when engine is hot. i think i will open a bit more the top rings since car will be used too for road racing sometimes.

Thanks for replies!
Logged
Pages: [1]   Go Up
« previous next »