:::RHMT::: Real Home Made Turbo

Please login or register.

Login with username, password and session length
Advanced search  

News:

ApexSilver06MR/Jason YOU WILL BE MISSED, RIP (link)  :'(

Pages: [1]   Go Down

Author Topic: Anyone think this will fit in a crx?  (Read 4864 times)

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Anyone think this will fit in a crx?
« on: November 19, 2012, 11:07:15 AM »

I have been racking my brain trying to decide how to actuate the hydro clutch on the H22 tranny in my crx. I really don't want a clutch cable, but I don't really see any room for a master cylinder at the top of the pedal under the dash. My hatch has a metal dash so I had all the room in the world for a master there. I'm considering this wilwood pedal and maybe cut a small hole in the firewall for the master to poke through. Thoughts?

Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

mrgreengenes

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
Re: Anyone think this will fit in a crx?
« Reply #1 on: November 19, 2012, 03:31:38 PM »
http://www.suja1motoring.com/productDetail.aspx?productId=1

Adds to stock cable pedal assembly, puts master cyl in cabin. I think i remember reading requiring to take out a hvac duct to fit...
Logged

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Anyone think this will fit in a crx?
« Reply #2 on: November 19, 2012, 05:08:26 PM »
I made my own just like that for my EF hatch. It has a metal dash so it fits fine and works like stock. The crx is keeping everything under the dash. That's not an option.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

jdmhatchracer94

  • I have a nova that will never run!!
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 2264
  • Official RHMT Nigglet!
Re: Anyone think this will fit in a crx?
« Reply #3 on: November 20, 2012, 01:38:45 AM »
Will see if i can find it read some one used a eg pedal assembly and mounted the master under hood like normal
Logged
4 door eg nbspnbsp 13.2@118 someone needs to run slicks
338hp 293tq

Good enough to fuck your mother

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Anyone think this will fit in a crx?
« Reply #4 on: November 20, 2012, 07:52:26 AM »
That can't be. The shock tower is too close. I have measured that every way possible, it won't work. I'm forming a plan, but won't know till the weekend when I really have time to get into it. That wilwood pedal won't work either. Not enough room on the floor.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Anyone think this will fit in a crx?
« Reply #5 on: November 28, 2012, 05:06:33 PM »
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Anyone think this will fit in a crx?
« Reply #6 on: November 28, 2012, 08:43:41 PM »
how does that work?
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Anyone think this will fit in a crx?
« Reply #7 on: November 28, 2012, 08:48:37 PM »
exactly. its oem. 90-91 Prelude. the brake pedal appears to be hallow and clutch pedal rod/pivot goes threw it....
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Anyone think this will fit in a crx?
« Reply #8 on: November 28, 2012, 08:56:25 PM »
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: Anyone think this will fit in a crx?
« Reply #9 on: November 28, 2012, 09:19:12 PM »
Nice OEM clean solution  :noel:
Logged

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Anyone think this will fit in a crx?
« Reply #10 on: November 28, 2012, 10:21:47 PM »
Quote from: 92CXyD on November 28, 2012, 09:19:12 PM
Nice OEM clean solution  :noel:

yeah, hack in a prelude pedal assy, and a s2k cmc.
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

92CXyD

  • Twincharged Smeghead
  • Global Moderator
  • Certified OG
  • *****
  • Online Online
  • Posts: 6789
  • I look around and all I see is Smegheads
Re: Anyone think this will fit in a crx?
« Reply #11 on: November 28, 2012, 10:37:58 PM »
Quote from: turbohf on November 28, 2012, 10:21:47 PM
Quote from: 92CXyD on November 28, 2012, 09:19:12 PM
Nice OEM clean solution  :noel:

yeah, hack in a prelude pedal assy, and a s2k cmc.

If ya need spacers for S2K clutch master cylinders.  :noel:
Logged

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Anyone think this will fit in a crx?
« Reply #12 on: November 28, 2012, 11:06:41 PM »
That's interesting. I think I'll keep that as a plan B to what's on my mind right now.
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

turbohf

  • aka: the rHMT Jew
  • Administrator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 9712
  • Overkill is Underrated
Re: Anyone think this will fit in a crx?
« Reply #13 on: November 28, 2012, 11:19:42 PM »
it might be worth a look. i know there are always a couple at the junkyard. if that side of the pedal cluster can fit without too much trouble, might be a solid idea...
Logged
Dustin  :Jew:
1987 Buick Regal Limited 6.0L/4L80E (LQ4, 862 heads, tbss intake, 92mm tb, e1841p cam, Holley EFI)
2000 Silverado LS 5.3L Reg Cab Short Bed
1966 Chevy II Nova 400 4dr Sedan V8


'Faster, Faster, until the thrill of speed overcomes the fear of death.'

PhilStubbs

  • Certified OG
  • *****
  • Offline Offline
  • Posts: 5885
  • Teh Secksy.....I has it
Re: Anyone think this will fit in a crx?
« Reply #14 on: November 28, 2012, 11:33:15 PM »
Yea, I'm liking the idea. I think it's a bit more effort than my current plan. I think getting rid of the brake booster will open up enough room to get the clutch master between the brake master and the shock tower
Logged
obd1>gtgtall

 fucking box started smoking and i saw a flame start up so i grabbed a bucket of water and splashed it on the breaker box.

highroller54

  • I caught the fable Novacorn
  • Moderator
  • Certified OG
  • *****
  • Offline Offline
  • Posts: 10830
  • Spreading the rhmt word like PB&J
Re: Anyone think this will fit in a crx?
« Reply #15 on: December 01, 2012, 10:40:18 PM »
should be plan a
Logged
Xenocron is a piece of shit.

I solve my problems like an adult, at the strip club drinking on a work night. http://www.competitiondiesel.com/forums/images/smilies/turbo1.gif
Pages: [1]   Go Up
« previous next »